Products Brands Industries Resources About Us Value Proposition
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety Accessories
Emergency ResponderAccessories FR HoodsFire & Rescue GlovesFire & Rescue Goggle
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionFace ProtectionSafety Eyewear AccessoriesSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidAccessoriesFirst Aid Kit
Foot ProtectionOver-the-ShoeOver-the-Shoe BootsOver-the-SockOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical Resistant GlovesCold Protection GlovesCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHeat Protection GlovesHigh Performance GlovesLeather Drivers GlovesLeather Palm GlovesMetal Mesh GlovesParade & Uniform Gloves
Head ProtectionAccessoriesBump CapsFR HoodsHard HatsSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionDisposable MasksReusable Facepieces
Warning BeaconsFlash Baton
Welding ProtectionAccessoriesFR ClothingHand ProtectionHead Protection
WorkwearWork Apparel

Enhanced grip and performance

PIP is constantly bringing new innovations to our general purpose glove line. With a variety of superior coating and grip technologies, combined with comfortable liner materials, these products improve performance without sacrificing dexterity and comfort.

SHOWING 1-36 OF 40 ITEMS
1 of 2
FILTERS:
CLEAR ALL
Nylon with Polyurethane Grip BEST SELLER

G-Tek®

Seamless Knit Nylon Blend Glove with Polyurethane Coated Flat Grip on Palm & Fingers - Touchscreen

33-B125

  • Liner Material: Nylon
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Grip: Flat
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: XS-2XL
  • Packed: 25 Dozen/Case

4131

EN 388 2016 Results: 4131X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Nylon with Polyurethane Grip

G-Tek® VR-X™

Seamless Knit Nylon Glove with Polyurethane Advanced Barrier Protection Coating on Full Hand – Touchscreen Compatible

33-VRX180

  • Liner Material: Nylon
  • Gauge: 18
  • Coating: Polyurethane
  • Coating Coverage: Full Hand
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible, ESD Safe
  • Sizes: XS-XXL
  • Packed: 12 Dozen/Case

3111

EN 388 2016 Results: 3111XX
Abrasion: 3
Cut (Coupe Test): 1
Tear: 1
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ANSI Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Protective Gloves Against Micro-organisms

The EN ISO 374-5 VIRUS standard measures the ability of gloves to protect users against bacteria, fungi and viruses. Gloves with this marking must pass EN374-2 for leak testing.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

ESD Safe

ESD is an acronym for electrostatic discharge. This discharge is the rapid transfer of static between two different objects. Although ESD doesn’t typically cause harm to the human body - you might only experience it as a small, surprising shock - it can cause extensive damage to electrical equipment and sensitive instruments. This damage may either be permanent, causing the device to malfunction (known as a catastrophic failure), or it may occur on a smaller scale that would be difficult to detect before the device is sent out for service (known as latent defect).

FENTANYL PROTECTION
Test Method: ASTM D6978-05

In accordance with ASTM D6978-05, Personal Protective Equipment can be tested to ensure an effective barrier against Fentanyl. The ASTM D6978-05 Standard Practice for Assessment of Medical Gloves to Permeation by Chemotherapy Drug tests a breakthrough time of typically 240 minutes to determine if the PPE provides an effective barrier.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Nylon with Polyurethane Grip BEST SELLER

G-Tek®

Seamless Knit Nylon Blend Glove with Polyurethane Coated Flat Grip on Palm & Fingers - Touchscreen

33-G125

  • Liner Material: Nylon
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Grip: Flat
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: XS-3XL
  • Packed: 25 Dozen/Case

4131

EN 388 2016 Results: 4131X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Nylon with Nitrile Grip

G-Tek®

Seamless Knit Nylon Glove with Nitrile Coated Foam Grip on Palm & Fingers

34-C232

  • Liner Material: Nylon
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-XL
  • Packed: 25 Dozen/Case

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Nitrile Grip BEST SELLER

PosiGrip®

Seamless Knit Nylon/Spandex Glove with Nitrile Coated Foam Grip on Palm & Fingers - 15 Gauge

715SNFTP

  • Liner Material: Nylon/ Spandex
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-XXL
  • Packed: 12 Dozen/Case

4131

EN 388 2016 Results: 4131X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with NeoFoam Grip

G-Tek® NeoFoam®

Seamless Knit Nylon Glove with NeoFoam® Coated Palm & Fingers - Light Duty

34-600

  • Liner Material: Nylon
  • Gauge: 15
  • Coating: Neofoam
  • Coating Coverage: Palm & Fingers
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: XS-XXL
  • Packed: 12 Dozen/Case

4121

EN 388 2016 Results: 4121XX
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Nylon with Nitrile Grip

G-Tek®

Economy Seamless Knit Nylon Glove with Nitrile Coated Smooth Grip on Palm & Fingers

34-225

  • Liner Material: Nylon
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: Smooth
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS - XL
  • Packed: 25 Dozen/Case

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Nitrile Grip

Boss®

Seamless Knit Nylon Glove with Premium Nitrile Coated MicroSurface Grip on Palm & Fingers - 15 Gauge

1UH7830

  • Liner Material: Nylon
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-3XL
  • Packed: 144 Pair/Case

4131

EN 388 2016 Results: 4131XX
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Nitrile Grip

G-Tek®

Seamless Knit Nylon Glove with Nitrile Coated MicroSurface Grip on Palm & Fingers

34-500

  • Liner Material: Nylon
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: 2XS-2XL
  • Packed: 12 Dozen/Case

4121

EN 388 2016 Results: 4121XX
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-2
ANSI Abrasion Level: 2
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Polyurethane Grip

G-Tek®

Seamless Knit Nylon Blend Glove with Polyurethane Coated Flat Grip on Palm & Fingers - Touchscreen

33-125

  • Liner Material: Nylon
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Grip: Flat
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: XS-2XL
  • Packed: 25 Dozen/Case

4131

EN 388 2016 Results: 4131X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Specialty PVC Blends on Gloves

G-Tek®

Seamless Knit Nylon Glove with Air-Infused PVC Coating on Palm & Fingers

32-747

  • Liner Material: Nylon
  • Gauge: 15
  • Coating: PVC
  • Coating Coverage: Palm & Fingers
  • Grip: Smooth
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS - XL
  • Packed: 12 Dozen/Case

3131

EN 388 2016 Results: 3131X
Abrasion: 3
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-1
ANSI Abrasion Level: 1
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Nitrile Grip

G-Tek®

Seamless Knit Nylon Glove with Nitrile Coated Foam Grip on Palm & Fingers

34-C234

  • Liner Material: Nylon
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-XL
  • Packed: 25 Dozen/Case

4131

EN 388 2016 Results: 4131X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-2
ANSI Abrasion Level: 2
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Polyurethane Grip

G-Tek®

Heavy Weight Seamless Knit Nylon Glove with Premium Thick Polyurethane Coated Flat Grip on Palm & Fingers

33-325

  • Liner Material: Nylon
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Grip: Flat
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS - XXL
  • Packed: 25 Dozen/Case

4131

EN 388 2016 Results: 4131X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Polyurethane Grip

G-Tek® Touch

Seamless Knit Nylon/Polyester Glove with Polyurethane Coated Flat Grip on Palm & Fingers - Touchscreen Compatible

33-GT125

  • Liner Material: Nylon/ Polyester
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Grip: Flat
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: XS-2XL
  • Packed: 25 Dozen/Case

4131

EN 388 2016 Results: 4131X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Latex Crinkle Grip on Cotton/Poly

G-Tek®

Seamless Knit Nylon Glove with Latex Coated Crinkle Grip on Palm & Fingers

713SLC

  • Liner Material: Nylon
  • Gauge: 13
  • Coating: Latex
  • Coating Coverage: Palm & Fingers
  • Grip: Crinkle
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-3XL
  • Packed: 12 Dozen/Case

3121

EN 388 2016 Results: 3121X
Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Polyurethane Grip

G-Tek®

Seamless Knit Nylon Glove with Polyurethane Coated Smooth Grip on Palm & Fingers - 15 Gauge

701CRPB

  • Liner Material: Nylon
  • Gauge: 15
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Grip: Smooth
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-XXL
  • Packed: 12 Dozen/Case

4131

EN 388 2016 Results: 4131XX
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Specialty PVC Blends on Gloves

G-Tek® PosiGrip®

Seamless Knit Nylon Glove with Air-Infused PVC Coating on Palm & Fingers

713SPA

  • Liner Material: Nylon
  • Gauge: 15
  • Coating: PVC
  • Coating Coverage: Palm & Fingers
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 12 Dozen/Case

3131

EN 388 2016 Results: 3131X
Abrasion: 3
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Nitrile Grip

G-Tek®

Seamless Knit Nylon Glove with Nitrile Coated MicroSurface Grip on Palm & Fingers - 18 Gauge

34-400

  • Liner Material: Nylon
  • Gauge: 18
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 12 Dozen/Case

4111

EN 388 2016 Results: 4111X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 1
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-1
ANSI Abrasion Level: 1
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Nitrile Grip

PosiGrip®

Premium Seamless Knit Nylon/Spandex Glove with Nitrile Coated Foam Grip on Palm, Fingers & Knuckles - Micro Dotted Grip

715SNFTKD

  • Liner Material: Nylon/ Spandex
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm, Fingers & Knuckles
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-2XL
  • Packed: 12 Dozen/Case

4131

EN 388 2016 Results: 4131X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Polyurethane Grip

G-Tek® PosiGrip®

Seamless Knit Nylon Glove with Polyurethane Coated Flat Grip on Palm & Fingers

713SUCG

  • Liner Material: Nylon
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Grip: Flat
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 25 Dozen/Case

4131

EN 388 2016 Results: 4131X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Polyurethane Grip

G-Tek® PosiGrip®

Seamless Knit Nylon Glove with Polyurethane Coated Flat Grip on Palm & Fingers

713SUCB

  • Liner Material: Nylon
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Grip: Flat
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 12 Dozen/Case

4131

EN 388 2016 Results: 4131
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Nitrile Grip

G-Tek® PosiGrip®

Economy Seamless Knit Nylon Glove with Nitrile Coated Foam Grip on Palm & Fingers

715SNFB

  • Liner Material: Nylon
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-XL
  • Packed: 12 Dozen/Case

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Nitrile Grip

PosiGrip®

Premium Seamless Knit Nylon/Spandex Glove with Nitrile Coated Foam Grip on Palm, Fingers & Knuckles

715SNFTK

  • Liner Material: Nylon/ Spandex
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm, Fingers & Knuckles
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-2XL
  • Packed: 12 Dozen/Case

4131

EN 388 2016 Results: 4131X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Nitrile Grip

G-Tek®

Economy Seamless Knit Nylon Glove with Nitrile Coated Smooth Grip on Palm, Fingers & Knuckles

715SNC

  • Liner Material: Nylon
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm, Fingers & Knuckles
  • Grip: Smooth
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-XL
  • Packed: 12 Dozen/Case

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-2
ANSI Abrasion Level: 2
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Polyurethane Grip

G-Tek® PosiGrip®

Seamless Knit Nylon Glove with Polyurethane Coated Flat Grip on Palm & Fingers - 15 Gauge

715SUGB

  • Liner Material: Nylon
  • Gauge: 15
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Grip: Flat
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 12 Dozen/Case

4131

EN 388 2016 Results: 4131XX
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Nitrile Grip

G-Tek® PosiGrip®

Seamless Knit Nylon Glove with Nitrile Coated Foam Grip on Palm & Fingers - Micro Dotted Palm

715SBP

  • Liner Material: Nylon
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: Dot
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-XL
  • Packed: 12 Dozen/Case

4131

EN 388 2016 Results: 4131
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Polyurethane Grip

G-Tek® PosiGrip®

Seamless Knit Nylon Glove with Polyurethane Coated Flat Grip on Palm & Fingers

713SUC

  • Liner Material: Nylon
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Grip: Flat
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-XL
  • Packed: 25 Dozen/Case

4131

EN 388 2016 Results: 4131X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Nitrile Grip

G-Tek® PosiGrip®

Seamless Knit Nylon Glove with Nitrile Coated Foam Grip on Palm & Fingers

715SNFLW

  • Liner Material: Nylon
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 12 Dozen/Case

4131

EN 388 2016 Results: 4131X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Polyurethane Grip

G-Tek®

Seamless Knit Nylon Blend Glove with Polyurethane Coated Flat Grip on Palm & Fingers - Touchscreen & Vend-Ready

33-B125V

  • Liner Material: Nylon
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Grip: Flat
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: XS - XXL
  • Packed: 300 Pair/Case

4131

EN 388 2016 Results: 4131X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Nylon with Nitrile Grip

G-Tek® PosiGrip®

Seamless Knit Nylon Glove with Nitrile Coated Foam Grip on Palm & Fingers

715SNFLB

  • Liner Material: Nylon
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-XXL
  • Packed: 12 Dozen/Case

4131

EN 388 2016 Results: 4131X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Polyurethane Grip

G-Tek®

Seamless Knit Nylon Blend Glove with Polyurethane Coated Flat Grip on Palm & Fingers - Touchscreen & Vend-Ready

33-G125V

  • Liner Material: Nylon
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Grip: Flat
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: XS - XXXL
  • Packed: 300 Pair/Case

4131

EN 388 2016 Results: 4131X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Latex Crinkle Grip on Cotton/Poly

G-Tek® PosiGrip®

Seamless Knit Nylon Glove with Latex Coated Crinkle Grip on Palm, Fingers & Knuckles

715SLC

  • Liner Material: Nylon
  • Gauge: 15
  • Coating: Latex
  • Coating Coverage: Palm, Fingers & Knuckles
  • Grip: Crinkle
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: s-xl
  • Packed: 12 Dozen/Case

3131

EN 388 2016 Results: 3131X
Abrasion: 3
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with NeoFoam Grip

G-Tek® NeoFoam®

Seamless Knit Nylon Glove with NeoFoam® Coated Palm & Fingers - Micro Dotted Grip

34-645

  • Liner Material: Nylon
  • Gauge: 15
  • Coating: Neofoam
  • Coating Coverage: Palm & Fingers
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: S-XXL
  • Packed: 12 Dozen/Case

4131

EN 388 2016 Results: 4131X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-1
ANSI Abrasion Level: 1
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Nylon with Nitrile Grip

G-Tek®

Seamless Knit Nylon Glove with Nitrile Coated MicroSurface Grip on Palm & Fingers - Vend-Ready

34-500V

  • Liner Material: Nylon
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS - XXL
  • Packed: 144 Pair/Case

4121

EN 388 2016 Results: 4121XX
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-2
ANSI Abrasion Level: 2
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Nitrile Grip

G-Tek®

Economy Seamless Knit Nylon Glove with Nitrile Coated Foam Grip on Palm & Fingers - 15 Gauge

701CRNF

  • Liner Material: Nylon
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-XL
  • Packed: 12 Dozen/Case

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with NeoFoam Grip

G-Tek® NeoFoam®

Seamless Knit Nylon Glove with NeoFoam® Coated Palm, Fingers & Knuckles - Micro Dotted Grip

34-648

  • Liner Material: Nylon
  • Gauge: 15
  • Coating: Neofoam
  • Coating Coverage: Palm & Fingers
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: S-XXL
  • Packed: 12 Dozen/Case

4131

EN 388 2016 Results: 4131X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
SHOWING 1-36 OF 40 ITEMS
1 of 2
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL