Products Brands Industries Resources About Us Value Proposition
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE ApronCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety Accessories
Emergency ResponderFR HoodsFire & Rescue GlovesFire & Rescue Goggle
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionEyewear AccessoriesFace ProtectionSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidEyewashFirst Aid Kit
Foot ProtectionOver-the-Shoe BootsOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical ResistantCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHi Performance GloveLeather DriversLeather Palm GlovesMetal Mesh GlovesParade GlovesProtection From ColdProtection From Heat
Head ProtectionBump CapsFR HoodsHard HatsHead Protect AccessoriesSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHi-Vis RainwearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionDisposable MasksReusable Facepieces
Warning BeaconsFlash Baton
Welding ProtectionFR ClothingHand ProtectionWelding Accessory
WorkwearWork Apparel

Protect Your Arms

When using hand protection, you should also consider arm protection to extend your safety coverage to protect against other potential injuries. Whether you handle large or sharp objects, are exposed to sparks or just need to have your forearms covered, protective sleeves can produce various solutions to meet your safety needs.

Arm Protection (162)

VIEW:
All
  • Description
  • Bullets
  • Icons
  • Hide All
SORT:
2-Ply Tube Knit

Kut Gard®

2-Ply DuPont™ Kevlar® Sleeve with Thumb Hole

10-KSTO

  • Cut Level: A3
  • ANSI Abrasion Level: 1
  • ANSI Contact Heat Level: 3
  • Ply: 2-Ply
  • Liner Material: Kevlar
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: Finished
  • Packed: 144/Case
 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

1-Ply Machine Knit

Kut Gard®

Single-Ply DuPont™ Kevlar® Armor Blended Blousy Sleeve

10-KVSYBH

  • Cut Level: A6
  • Ply: Single-Ply
  • Liner Material: Kevlar
  • Top of Arm: Elastic Cuff
  • Construction: Blousy
  • Sizes: 12", 18"
  • Packed: 144/Case
 
Cut Level: A6
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

2-Ply Tube Knit

Kut Gard®

2-Ply DuPont™ Kevlar® Sleeve

10-KS

  • Cut Level: A3
  • ANSI Abrasion Level: 1
  • ANSI Contact Heat Level: 3
  • Ply: 2-Ply
  • Liner Material: Kevlar
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 10" - 24"
  • Packed: 144/Case
 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

2-Ply Tube Knit

Kut Gard® ECO Series™

2-Ply ASP Aramid Sleeve

ASP

  • Cut Level: A3
  • ANSI Abrasion Level: 1
  • ANSI Contact Heat Level: 2
  • Ply: 2-Ply
  • Liner Material: Aramid
  • Top of Arm: Overstitched Elastic
  • Construction: Multi-Layer, Seamless Knit, Tube Knit
  • Sizes: 14, 18, 22, 24
  • Packed: 144/Case
 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

1-Ply Machine Knit

Kut Gard®

ATA® / HPPE Blended Sleeve with Hook and Loop Closure with Thumb Hole

20-S13ATA/PE4-T-VEL

  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Velcro Closure
  • Construction: Machine Knit
  • Sizes: 18" + 22"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

2-Ply Tube Knit

Kut Gard®

2-Ply DuPont™ Kevlar® Sleeve with Adjustable Velcro Closure and Thumb Hole

10-KSTHV

  • Cut Level: A3
  • ANSI Contact Heat Level: 3
  • Ply: 2-Ply
  • Liner Material: Kevlar
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Velcro Closure
  • Construction: Seamless Knit
  • Sizes: 18"
  • Packed: 144/Case
 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

1-Ply Machine Knit

Kut Gard®

ATA Technology, HPPE, 13 Gauge, ANSI A4 Sleeve with Top of Arm Hook and Loop Closure

20-S13ATA/PE4HVOTVEL

  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Velcro Closure
  • Construction: Machine Knit
  • Sizes: 18", 22"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

2-Ply Tube Knit

Claw Cover®

2-Ply ACP / Dyneema® Blended Sleeve

20-DA

  • Cut Level: A4
  • Ply: 2-Ply
  • Liner Material: ACP/ Dyneema
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 10"-24"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

2-Ply Cane Mesh

Kut Gard®

2-Ply Nylon Cane Mesh Sleeve - 9"

30-6795B

  • Cut Level: A4
  • ANSI Abrasion Level: 2
  • Ply: 2-Ply
  • Liner Material: Nylon Cane Mesh
  • Top of Arm: Velcro Closure
  • Construction: Cut-and-Sewn
  • Sizes: 9"
  • Packed: 72 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

2-Ply Tube Knit

Kut Gard®

2-Ply DuPont™ Kevlar® Sleeve

10-BKDS

  • Cut Level: A3
  • ANSI Abrasion Level: 1
  • Ply: 2-Ply
  • Liner Material: Kevlar
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 8"-24"
  • Packed: 144/Case
 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

1-Ply Smart Fit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® Blended Sleeve with Smart-Fit® and Thumb Hole

10-21KVACPMBKTH

  • Cut Level: A4
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ACP/ Kevlar
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Plush Top Elastic
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 18"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

2-Ply Tube Knit

Kut Gard®

2-Ply DuPont™ Kevlar® Sleeve with Cotton Inner Layer

10-KSCL

  • Cut Level: A3
  • Ply: 2-Ply
  • Liner Material: Cotton/ Kevlar
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 14"-18"
  • Packed: 144/Case
 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

1-Ply Machine Knit

Claw Cover®

Single-Ply HPPE / Steel Blended Sleeve with Antimicrobial Fibers

S13CC/8-AC

  • Cut Level: A8
  • Ply: Single-Ply
  • Construction: Antimicrobial, Machine Knit, Seamless Knit
  • Sizes: 22
  • Packed: 48/Case
 
Cut Level: A8
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

2-Ply Tube Knit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® Blended Sleeve

10-KASCTOT

  • Cut Level: A3
  • Ply: Single-Ply
  • Liner Material: ACP/ Kevlar
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 24"
  • Packed: 144/Case
 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

1-Ply Machine Knit

Kut Gard®

ATA®/ HPPE Blended Sleeve

20-S13ATA/PE6

  • Cut Level: A6
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Top of Arm: Overstitched Elastic
  • Construction: Machine Knit
  • Sizes: 18"
  • Packed: 144/Case
 
Cut Level: A6
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

1-Ply Machine Knit

Claw Cover®

Single-Ply HPPE / Steel Blended Sleeve with Antimicrobial Fibers

S7-15-AC

  • Cut Level: A7
  • Ply: Single-Ply
  • Liner Material: HPPE/ Polyester/ Spandex/ Stainless Steel Wire
  • Top of Arm: Clip, Overstitched Elastic
  • Construction: Blousy, Extended Cuff, Antimicrobial
  • Sizes: 22"
  • Packed: 144/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

1-Ply Machine Knit

Kut Gard®

ATA®/ HPPE Blended Sleeve

20-S10ATA/PE9

  • Cut Level: A9
  • ANSI Abrasion Level: 4
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE/ Stainless Steel Wire
  • Top of Arm: Overstitched Elastic
  • Construction: Machine Knit
  • Sizes: 18"
  • Packed: 144/Case
 
Cut Level: A9
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

2-Ply Tube Knit

Kut Gard® ECO Series™

2-Ply ASP Aramid Sleeve with Thumb Hole

ASP-T

  • Cut Level: A3
  • ANSI Abrasion Level: 1
  • ANSI Contact Heat Level: 2
  • Ply: 2-Ply
  • Liner Material: Aramid
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Overstitched Elastic
  • Construction: Multi-Layer, Seamless Knit, Tube Knit
  • Sizes: 14, 18, 22, 24
  • Packed: 144/Case
 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

1-Ply Smart Fit

Kut Gard®

Single-Ply Pritex™ Blended Sleeve with Antimicrobial Fibers and Smart-Fit®

15-21PRIBPS

  • Cut Level: A2
  • Ply: Single-Ply
  • Liner Material: Antimicrobial/ Pritex
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 8"-24"
  • Packed: 144/Case
 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

1-Ply Tube Knit

Kut Gard®

Single-Ply DuPont™ Kevlar® Sleeve

10-KSS

  • Cut Level: A2
  • Ply: Single-Ply
  • Liner Material: Kevlar
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 10, 12, 14, 18
  • Packed: 144/Case
 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Rubber

Kut Gard®

AR/FR Single-Ply DuPont™ Kevlar® / Nomex® Xtreme Arc Cut Fiber Blended Sleeve

S13ARCGY/N4

  • PPE Category: 2
  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: Kevlar
  • Top of Arm: Overstitched Elastic
  • Construction: Tube Knit
  • Sizes: 18
  • Packed: 72/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

 
APTV 15.2 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

1-Ply Machine Knit

Kut Gard®

ATA®/ HPPE Blended Sleeve with Thumb Hole

20-S10ATA/PE9-T

  • Cut Level: A9
  • ANSI Abrasion Level: 4
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE/ Stainless Steel Wire
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Overstitched Elastic
  • Construction: Machine Knit
  • Sizes: 18"
  • Packed: 144/Case
 
Cut Level: A9
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

1-Ply Smart Fit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® / Pritex™ Blended Sleeve with Antimicrobial Fibers and Smart-Fit®

15-21KVBK

  • Cut Level: A4
  • Ply: Single-Ply
  • Liner Material: ACP/ Antimicrobial/ Kevlar/ Pritex
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 14"-24"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

1-Ply Loop Out

PIP®

Heavy Weight Terry Cloth Sleeve - 15"

42-215

  • Liner Material: Terry Cloth
  • Ply: Single-Ply
  • Top of Arm: Elastic Ends
  • Construction: Seamless Knit
  • Sizes: 15 in.
  • Packed: 60/Case
1
Protective Gloves Against Thermal Hazards: 1
Resistance to Flammability -
Contact Heat Resistance - 1
Convective Heat Resistance -
Radiant Heat Resistance -
Resistance to Small Splashes of Molten Metal -
Resistance to Large Splashes of Molten Metal -

EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.

1-Ply 2x1 Tube Knit

Kut Gard®

AR/FR Single-Ply ACP / DuPont™ Kevlar® Blended Sleeve with Thumb Hole

10-KAM

  • PPE Category: 2
  • Cut Level: A5
  • ANSI Abrasion Level: 1
  • Ply: Single-Ply
  • Liner Material: ACP/ Kevlar
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit
  • Sizes: 18"
  • Packed: 144/Case
 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ATPV 9.5 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Single Mesh Sleeves

US Mesh®

Stainless Steel Mesh Sleeve with Adjustable Chest Strap

USM-3105

  • Stainless Steel Ring Mesh Sleeve Adjustable Web Shoulder Strap
  • Sizes: S-2XL
  • Packed: 1/Case
1-Ply Smart Fit

Kut Gard®

Single-Ply ACP / Dyneema® Blended Sleeve with Smart-Fit® and Thumb Hole

20-21DACPBPTH

  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • Ply: Single-Ply
  • Liner Material: ACP/ Dyneema
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 14-24
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

1-Ply Machine Knit

Kut Gard®

ATA®/ HPPE Blended Sleeve with Thumb Hole

20-S13ATA/PE4-T

  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Overstitched Elastic
  • Construction: Machine Knit
  • Sizes: 18"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

1-Ply Machine Knit

Kut Gard®

ATA® / HPPE Blended Sleeve with Hook and Loop Closure

20-S13ATA/PE4-VEL

  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Top of Arm: Velcro Closure
  • Construction: Machine Knit
  • Sizes: 18", 22"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

1-Ply Smart Fit

Kut Gard®

Single-Ply Pritex™ Blended Sleeve with Antimicrobial Fibers and Smart-Fit®

15-21PRIWPS

  • Cut Level: A2
  • Ply: Single-Ply
  • Liner Material: Antimicrobial/ Pritex
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 8"-24"
  • Packed: 144/Case
 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

1-Ply Machine Knit

Kut Gard®

ATA Technology HPPE Blend, 13G Knit Sleeve

20-S13ATA/PE7

  • Cut Level: A7
  • Ply: Single-Ply
  • Liner Material: HPPE/ Stainless Steel Wire
  • Top of Arm: Overstitched Elastic
  • Construction: Antimicrobial, Blousy, Low-Lint, Machine Knit, Seamless Knit
  • Sizes: 18, 22
  • Packed: 144/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

1-Ply Machine Knit

Claw Cover®

Single-Ply HPPE / Steel Blended Sleeve with Antimicrobial Fibers

CS7LGY-AC

  • Cut Level: A9
  • ANSI Abrasion Level: 2
  • Ply: Single-Ply
  • Liner Material: HPPE/ Stainless Steel Wire/ Antimicrobial
  • Top of Arm: Clip
  • Construction: Seamless Knit
  • Sizes: 22"
  • Packed: 100/Case
 
Cut Level: A9
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

1-Ply Machine Knit

Kut Gard®

ATA Technology HPPE Blend 13G Seamless Knit Sleeve with Thumb Hole

20-S13ATA/PE7-T

  • Cut Level: A7
  • Ply: Single-Ply
  • Liner Material: HPPE/ Stainless Steel Wire
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Overstitched Elastic
  • Construction: Antimicrobial, Blousy, Low-Lint, Machine Knit, Seamless Knit
  • Sizes: 18, 22
  • Packed: 144/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

1-Ply Machine Knit

Kut Gard®

ATA Technology, Fiber Blended Sleeve, Single-Ply

MSATP

  • Cut Level: A2
  • ANSI Abrasion Level: 1
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Polyester
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 12-22
  • Packed: 200/Case
 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

1-Ply Machine Knit

Kut Gard®

ATA®/ HPPE Blended Sleeve

20-S13ATA/PE4

  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Top of Arm: Overstitched Elastic
  • Construction: Machine Knit
  • Sizes: 18"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

1-Ply Tube Knit

Kut Gard®

AR/FR Single-Ply DuPont™ Kevlar® / Nomex® Xtreme Arc Cut Fiber Blended Sleeve with Thumb Hole

S13ARCGY/N4-T

  • PPE Category: 2
  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: Kevlar
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Overstitched Elastic
  • Construction: Tube Knit
  • Sizes: 18
  • Packed: 72/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

 
15.2 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

SHOWING 1-36 OF 162 ITEMS
1 of 5
Compare ()
Clear All Compare
Okay, Got it.

Arm Protection

X

ORDER SAMPLE

X

GET FIELD TRIAL