Products Brands Industries Resources About Us Value Proposition
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety Accessories
Emergency ResponderAccessories FR HoodsFire & Rescue GlovesFire & Rescue Goggle
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionFace ProtectionSafety Eyewear AccessoriesSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidAccessoriesFirst Aid Kit
Foot ProtectionOver-the-ShoeOver-the-Shoe BootsOver-the-SockOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical Resistant GlovesCold Protection GlovesCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHeat Protection GlovesHigh Performance GlovesLeather Drivers GlovesLeather Palm GlovesMetal Mesh GlovesParade & Uniform Gloves
Head ProtectionAccessoriesBump CapsFR HoodsHard HatsSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionDisposable MasksReusable Facepieces
Warning BeaconsFlash Baton
Welding ProtectionAccessoriesFR ClothingHand ProtectionHead Protection
WorkwearWork Apparel

Leaders in
Hand Protection
and PPE

BROWSE ALL PRODUCTS

Search Results For ""

SHOWING 397-432 OF 2771 ITEMS
12 of 77
Disposable Clothing

PIP®

SBP Light Blue Shoe Cover - Non Skid 30GSM

3518BNS

  • Disposable SBP Shoe Covers
  • Blue
  • Non-Skid Tread
  • Elastic Top
  • 200 Each 30 gsm
  • Sizes: L-XL
  • Packed: 1/Case
Hi Performance Glove

Boss® Xtreme

AR Rated Top Grain Goatskin Leather Drivers Glove with Para-Aramid Lining - Keystone Thumb

09-LC533AR

  • ARC Rating: 44 cal/cm2
  • Hide: Top Grain Goatskin
  • Gauge: 13
  • Thumb: Keystone
  • Lining: Aramid
  • Palm: Leather
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: M-3XL
  • Packed: 6 Dozen/Case
ansi-A5
ANSI Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

2X32E

EN 388 2016 Results: 2X32E
Abrasion: 2
Cut (Coupe Test): X
Tear: 3
Puncture: 2
Cut (TDM-100 Test): E
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

44 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Protection From Cold

PIP®

Economy Top Grain Pigskin Leather Drivers Glove with Red Fleece Lining - Keystone Thumb

994KF

  • Hide: Top Grain Pigskin
  • Grade: Economy
  • Lining: Fleece
  • Palm: Leather
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 10 Dozen/Case
Cold Weather Wear BEST SELLER

Bisley®

ANSI Class E Extreme Cold Bib Overall

318M6452T

  • Class E Ripstop Insulated Bib Overall
  • 4 Pockets
  • Zipper Closure
  • CSA Z96
  • 50+ Sun Protection
  • Sizes: S-4XL
  • Packed: 5/Case
Ansi Class E

Applies to retro-reflective equipped pants or shorts, designed to be worn in combination with either Class 2 or Class 3 tops. When worn in this manner, the ensemble is rated as Performance Class 3.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Hi-Vis Apparel

Bisley®

ANSI Type R Class 3 and CSA Z96 X-Back Long Sleeve Work Shirt with X-Airflow™

313M6490X

  • ANSI Type/Class: R3
  • Fabric: Cotton/ Polyester/ Ripstop
  • Reflective Type: Silver
  • Reflective Width: 2"
  • Closure: Buttons
  • Total Pockets: 2
  • Construction: X-Back, Vented Back, Ripstop
  • Sizes: S-5XL
  • Packed: 20/Case
Type/Class R3

Class R3 apparel is intended for workers requiring the highest level of visibility, have high task loads and need to be visible throughout a full range of body motions.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Arc Accessories NEW

PIP®

Premium AF Coated Arc Flash Shield for Cap Style Hard Hats - 12 Cal/cm2

9400-55505T

  • Accessory Type: Arc Shield
  • PPE Category: 2
  • ARC Rating: 12 cal/cm2
  • Sizes: OS
  • Packed: 10/Case
ATPV 12 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Hi Performance Glove

Boss® Cut

Synthetic Microfiber Palm with Mesh Fabric Back and Para-Aramid Cut Lining

120-MC1225T

  • Liner Material: HPPE/ Spandex
  • Coating: Uncoated
  • Palm: Synthetic Leather
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Adjustable Straps, Cut-and-Sewn, Touchscreen Compatible
  • Sizes: S-2XL
  • Packed: 72 Pair/Case
ansi-A5
ANSI Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X22E

EN 388 2016 Results: 3X22E
Abrasion: 3
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): E
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Cut Resistant Gloves

Barracuda®

Hi-Vis Seamless Knit PolyKor® Blended Glove with Nitrile Coated Sandy Grip on Palm & Fingers - Touchscreen Compatible

HVG713SNF

  • ANSI Cut Level: A4
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch, Touchscreen Compatible
  • Sizes: S-2XL
  • Packed: 12 Dozen/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42D

EN 388 2016 Results: 4X42DX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Chemical Resistant

Assurance®

Unsupported Nitrile, Unlined with Raised Diamond Grip - 15 Mil

50-N140G

  • Polymer: Nitrile
  • Thickness: 15 Mil
  • Lining: Unlined
  • Length: 13"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S - XXL
  • Packed: 12 Dozen/Case

3101

EN 388 2016 Results: 3101X
Abrasion: 3
Cut (Coupe Test): 1
Tear: 0
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Cut Resistant Gloves

Kut Gard®

Seamless Knit DuPont™ Kevlar® / Cotton Plated Glove - Medium Weight

07-K320

  • ANSI Cut Level: A1
  • Liner Material: Kevlar
  • Gauge: 7
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: S - XL
  • Packed: 6 Dozen/Case
ansi-A1
ANSI Cut Level: A1
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-1
ANSI Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Cut Resistant Sleeve

Kut Gard®

2-Ply DuPont™ Kevlar® Sleeve with Adjustable Velcro Closure and Thumb Hole

10-KSTHV

  • ANSI Cut Level: A3
  • ANSI Contact Heat Level: 3
  • Ply: 2-Ply
  • Liner Material: Kevlar
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Velcro Closure
  • Construction: Seamless Knit
  • Sizes: 18"
  • Packed: 144/Case
ansi-A3
ANSI Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Cut Resistant Wear

Kut Gard® ATA® PreventWear™

ATA® Blended Cut Resistant Jacket with Hi-Vis Sleeves and Thumb Loops

J100SP-3CM-HVB-TL

  • ATA Blended Cut Resistant Jacket with Full Back Coverage and Hi-Viz Biceps
  • Sizes: S-5XL
  • Packed: 1/Case
Cut Resistant Garment
Test Method: ASTM F2992-15

This test method assesses the cut resistance of a material when exposed to a cutting edge under specified loads. Data obtained from this test method can be used to compare the cut resistance of different materials with scores ranging from A1-A9. Click here to learn more.

This item offers cut protection in the following locations:

Abdomen: A6
Back: A4
Bicep: A8
Chest: A4
Forearm: A5
Neck/Collar: A7
Upper Back: A4

Hi-Vis Cold Gear

Bisley®

ANSI Type R Class 3 Women's 5-in-1 Jacket with Navy Bottom

333W6375H

  • Sizes: S-3XL
  • Packed: 5/Case
Type/Class R3

Class R3 apparel is intended for workers requiring the highest level of visibility, have high task loads and need to be visible throughout a full range of body motions.

SeamlessGlove Coated

G-Tek®

Seamless Knit Nylon Glove with Nitrile Coated Foam Grip on Palm & Fingers

34-C234

  • Liner Material: Nylon
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-XL
  • Packed: 25 Dozen/Case

4131

EN 388 2016 Results: 4131X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-2
ANSI Abrasion Level: 2
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Leather Drivers BEST SELLER

PIP®

Regular Grade Top Grain Cowhide Leather Drivers Glove - Straight Thumb

68-103

  • Hide: Top Grain Cowhide
  • Grade: Regular
  • Thumb: Straight
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn
  • Sizes: S - XXL
  • Packed: 10 Dozen/Case
Cut Resistant Gloves

G-Tek® PolyKor® Xrystal®

Seamless Knit PolyKor® Xrystal® Blended Glove with NeoFoam® Coated Palm & Fingers - Touchscreen Compatible

16-X570

  • ANSI Cut Level: A4
  • Liner Material: PolyKor Xrystal
  • Gauge: 13
  • Coating: Neofoam
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4542D

EN 388 2016 Results: 4542DX
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Rainwear

Viz™

ANSI Class E Value All Purpose Waterproof Pants with Black Bottoms

353-1202

  • Class E Ripstop Black Bottom Rain Pant
  • Removable Suspenders
  • Elastic Waist w/Drawstring
  • Pass thru Pockets
  • Zipper Gusset w/Snap Adjust
  • Sizes: S/M-4XL/5XL
  • Packed: 20/Case
Rainwear

VizAR™

AR/FR ANSI Type R Class 3 Value All Purpose 48" Raincoat

355-2505AR

  • ARC Rated ANSI 107 Type R Class 3 FR Rain Coat
  • 14 Cal/cm2 Zipper Front
  • Cape Vented Back
  • Attached Hood
  • FR Reflective Tape
  • Sizes: S-5X
  • Packed: 10/Case
Type/Class R3

Class R3 apparel is intended for workers requiring the highest level of visibility, have high task loads and need to be visible throughout a full range of body motions.

ATPV 14 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Cut Resistant Sleeve

Kut Gard®

ATA Technology, HPPE, 13 Gauge, ANSI A4 Sleeve with Top of Arm Hook and Loop Closure

20-S13ATA/PE4HVOTVEL

  • ANSI Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Velcro Closure
  • Construction: Machine Knit
  • Sizes: 18", 22"
  • Packed: 144/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Hi-Vis Apparel

PIP®

ANSI Type R Class 2 Two-Tone Six Pocket Mesh Vest

302-MVZP

  • ANSI Type/Class: R2
  • Fabric: Mesh/ Polyester
  • Reflective Type: Two-Tone
  • Reflective Width: 2"
  • Closure: Zipper
  • Sizes: S-5XL
  • Packed: 50/Case
Type/Class R2

Type/Class R2 apparel is necessary for workers exposed to traffic traveling over 25 mph and who work against complex backgrounds.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Cut Resistant Gloves

G-Tek® PolyKor®

Hi-Vis Seamless Knit PolyKor® Blended Glove with Double-Dipped Nitrile Coated MicroSurface Grip on Palm & Fingers

16-340LG

  • ANSI Cut Level: A3
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-2XL
  • Packed: 6 Dozen/Case
ansi-A3
ANSI Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4544C

EN 388 2016 Results: 4544CX
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 4
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Arc Clothing BEST SELLER

PIP®

AR/FR Dual Certified Coverall - 13.2 Cal/cm2

9100-2170D

  • Clothing Type: Coveralls
  • PPE Category: 2
  • ARC Rating: 13.2 cal/cm2
  • Fabric: Cotton/ Nylon/ Cotton/ Nylon/ Cotton/ Nylon/ Nylon
  • Weight: 9oz
  • Total Pockets: 2
  • Closure: Hook and Loop
  • Sizes: S-5X
  • Packed: 18/Case
ATPV 13.2 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Leather Drivers

PIP®

Superior Grade Top Grain Cowhide Leather Drivers Glove - Straight Thumb

68-101

  • Hide: Top Grain Cowhide
  • Grade: Superior
  • Thumb: Straight
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn
  • Sizes: XS - XXL
  • Packed: 10 Dozen/Case
Hi Performance Glove

G-Tek®

Seamless Knit HPPE Blended Glove with Impact Protection and Polyurethane Coated Palm & Fingers

710HGUB

  • Liner Material: HPPE
  • Gauge: 10
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Grip: Flat
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XXS-2XL
  • Packed: 120 Pair/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42D

EN 388 2016 Results: 4X42DP
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ansi-impact-1
ANSI Impact Level: 1

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Winter Caps & Liners

PIP®

Wind Resistant Winter Balaclava

364-1180

  • Fabric: Polyester
  • FR Properties: Non-FR
  • Coverage: Shoulder Length
  • Total Layers: 1
  • Warmth Level: Warmer
  • Sizes: OSFM
  • Packed: 144/Case
Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Cut Resistant Gloves

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers - Touchscreen Compatible

16-378

  • ANSI Cut Level: A7
  • Liner Material: PolyKor X7
  • Gauge: 18
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Elastic
  • Construction: Seamless Knit, Touchscreen Compatible
  • Sizes: XS-XXL
  • Packed: 6 Dozen/Case
ansi-A7
ANSI Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42F

EN 388 2016 Results: 4X42FX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-5
ANSI Abrasion Level: 5
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

SeamlessGlove Coated

G-Tek®

Heavy Weight Seamless Knit Nylon Glove with Premium Thick Polyurethane Coated Flat Grip on Palm & Fingers

33-325

  • Liner Material: Nylon
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Grip: Flat
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS - XXL
  • Packed: 25 Dozen/Case

4131

EN 388 2016 Results: 4131X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Hi-Vis Apparel

PIP®

ANSI Type R Class 3 Value Four Pocket Zipper Mesh Vest

303-MVGZ4P

  • ANSI Type/Class: R3
  • Fabric: Mesh/ Polyester
  • Reflective Type: Silver
  • Reflective Width: 2"
  • Closure: Zipper
  • Total Pockets: 4
  • Sizes: S-5X
  • Packed: 50/Case
Type/Class R3

Class R3 apparel is intended for workers requiring the highest level of visibility, have high task loads and need to be visible throughout a full range of body motions.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

First Aid Kit

PIP®

Contractor First Aid Kit - 25 Person

299-13290

  • Kit Type: Basic OSHA Kits
  • Kit Size: 25 Person
  • Case Type: Plastic
  • Sizes: Shrink Wrapped
  • Packed: 12/Case
Safety Glasses

Traditional Spectacle

Full Frame Safety Glasses with Smoke Frame, IR Filter Shade 3.0 Lens and Anti-Scratch Coating

249-5907-207

  • Frame Style: Full
  • Lens: IR Filter
  • Lens Color: Green
  • Lens Coating: Anti-Scratch, Anti-Fog
  • Temple: Spatula
  • Base Curve: 6
  • Sizes: One Size
  • Packed: 144 Pair/Case
Disposable Masks BEST SELLER

Dynamic™

Deluxe N95 Disposable Respirator with Valve - 10 Pack

270-RPD714N95

  • NIOSH Certified
  • Adjustable Metal Nose Band
  • Exhalation Valve
  • Cell Foam Nose Pad
  • Latex-free
  • Adjustable Strap
  • APF 10
  • Sizes: OSFM
  • Packed: 8 Boxes/Case
Evaporative Cooling

Clima-Band™

Adjustable 2-Layer Neck Gaiter

393-EZ310

  • Clima-Band™ Adjustable 2-Layer Neck Gaiter Performance Neck Gaiter
  • HI-Vis Yellow OR Black
  • Sizes: ONE
  • Packed: 100/Case
Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Hi Performance Glove

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with Impact Protection and NeoFoam® MicroSurface Grip on Palm & Fingers

16-MP935

  • Liner Material: PolyKor X7
  • Gauge: 13
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Coating: Neofoam
  • Coating Coverage: Palm & Fingers
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: M-2XL
  • Packed: 36 Pair/Case
ansi-A9
ANSI Cut Level: A9
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X43F

EN 388 2016 Results: 4X43FP
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): F
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ansi-impact-1
ANSI Impact Level: 1

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Chemical Resistant

Assurance®

Unsupported Nitrile, Unlined with Raised Diamond Grip - 8 Mil

50-N092B

  • Polymer: Nitrile
  • Thickness: 8 Mil
  • Lining: Unlined
  • Length: 13"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S - XXL
  • Packed: 12 Dozen/Case

2X01

EN 388 2016 Results: 2X01X
Abrasion: 2
Cut (Coupe Test): X
Tear: 0
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Hi Performance Glove

Boss® Grip

Synthetic Microfiber Palm with Silicone Coated Grip and Mesh Fabric Back

120-MG1220T

  • Liner Material: Spandex
  • Coating: Silicone
  • Coating Coverage: Palm & Fingers
  • Grip: Silicone
  • Palm: Synthetic Leather
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Adjustable Straps, Cut-and-Sewn, Touchscreen Compatible
  • Sizes: S-2XL
  • Packed: 72 Pair/Case

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Hi-Vis Apparel

PIP®

Non-ANSI Enhanced Visibility Mesh Vest

301-0702Z

  • Fabric: Mesh
  • Reflective Type: Silver
  • Closure: Zipper
  • Total Pockets: 2
  • Sizes: S-5X
  • Packed: 50/Case
SHOWING 397-432 OF 2771 ITEMS
12 of 77
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL