Products Brands Industries Resources About Us Value Proposition
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety Accessories
Emergency ResponderAccessories FR HoodsFire & Rescue GlovesFire & Rescue Goggle
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionFace ProtectionSafety Eyewear AccessoriesSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidAccessoriesFirst Aid Kit
Foot ProtectionOver-the-ShoeOver-the-Shoe BootsOver-the-SockOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical Resistant GlovesCold Protection GlovesCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHeat Protection GlovesHigh Performance GlovesLeather Drivers GlovesLeather Palm GlovesMetal Mesh GlovesParade & Uniform Gloves
Head ProtectionAccessoriesBump CapsFR HoodsHard HatsSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionDisposable MasksReusable Facepieces
Warning BeaconsFlash Baton
Welding ProtectionAccessoriesFR ClothingHand ProtectionHead Protection
WorkwearWork Apparel

Leaders in
Hand Protection
and PPE

BROWSE ALL PRODUCTS

Search Results For ""

SHOWING 181-216 OF 2771 ITEMS
6 of 77
Leather Drivers BEST SELLER

PIP®

Economy Top Grain Sheepskin Leather Drivers Glove with Aramid Blended Lining - Keystone Thumb

9110

  • ANSI Cut Level: A4
  • Hide: Top Grain Sheepskin
  • Cuff: Slip-on
  • Lining: Aramid
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

2X22D

EN 388 2016 Results: 2X22DX
Abrasion: 2
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ANSI Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Eyewear Accessories

Bouton® Optical

Lens Cleaning Towelette Dispenser

252-LCT100

  • Sizes: One Size
  • Packed: 1 Pair/Case
Chemical Resistant

Assurance®

Unsupported Neoprene/Latex, Flock Lined with Raised Diamond Grip - 28 Mil

52-3670

  • Polymer: Neoprene over Latex
  • Thickness: 28 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S - XXXL
  • Packed: 12 Dozen/Case

AKL

EN 374 Results: AKL
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Face Protection

Bouton® Optical

Aluminum Face Shield Bracket for Full Brim Hard Hats

251-01-5270

  • Material: Aluminum
  • Sizes: One Size
  • Packed: 60/Case
Disposable Gloves

Ambi-dex® Repel

Disposable Latex Glove, Powder Free with Textured Grip - 5 mil

62-322PF

  • Grade: Industrial
  • Polymer: Latex
  • Thickness: 5 Mil
  • Grip: Textured
  • Powder: Powder Free
  • Box Count: 100
  • Sizes: S - XL
  • Packed: 10 Boxes/Case
Ear Plugs NEW

Pinchfit™ BioSoft™

Disposable Bio-based Foam Ear Plug with Pinchfit™ Technology - NRR 32

PF-1

  • Hearing Style: Uncorded
  • Box Count: 100
  • Ear Plug Material: BioBased Foam
  • Shape: Tapered Push-In
  • NRR Rating: 32
  • SNR Rating: 38
  • Sizes: OSFM
  • Packed: 10 Boxes/Case
Made from Bio-Based Materials

PIP® has collaborated with global partners like Dyneema® to develop bio-based ultra-high molecular weight polyethylene fiber delivers the same performance as conventional HPPE fibers, but with a lower carbon footprint. This innovative technique utilizes the mass balance approach and further reduces our reliance on fossil fuel-based resources.

Hi-Vis Apparel BEST SELLER

PIP®

ANSI Type R Class 3 Two-Tone Eleven Pocket Mesh Surveyors Vest

303-0500M

  • ANSI Type/Class: R3
  • Fabric: Mesh/ Polyester
  • Reflective Type: Two-Tone
  • Reflective Width: 2"
  • Closure: Zipper
  • Total Pockets: 11
  • Sizes: S-5X
  • Packed: 50/Case
Type/Class R3

Class R3 apparel is intended for workers requiring the highest level of visibility, have high task loads and need to be visible throughout a full range of body motions.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Chemical Resistant

ChemGrip™

Neoprene Coated Glove with Foam Insulated Liner and Etched Rough Finish - 18"

57-8653R

  • Polymer: Neoprene
  • Lining: Foam
  • Length: 18"
  • Cuff: Straight
  • Grip: Etched
  • Dip: Multi
  • Construction: Supported
  • Sizes: L
  • Packed: 36 Pair/Case

KLPT

EN 374 Results: KLPT
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

3121

EN 388 2016 Results: 3121X
Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Cut Resistant Gloves

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® / Elastane Glove with Nitrile Coated Smooth Grip on Palm & Fingertips - Medium Weight

09-K1450

  • ANSI Cut Level: A2
  • Liner Material: Kevlar
  • Gauge: 15
  • Weight: Medium Weight
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-3XL
  • Packed: 12 Dozen/Case
ansi-A2
ANSI Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3221B

EN 388 2016 Results: 3221BX
Abrasion: 3
Cut (Coupe Test): 2
Tear: 2
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Chemical Resistant BEST SELLER

Assurance®

Unsupported Nitrile, Unlined with Sandpatch Grip - 22 Mil

50-N2272G

  • Polymer: Nitrile
  • Thickness: 22 Mil
  • Lining: Unlined
  • Length: 18"
  • Cuff: Straight
  • Grip: Sandpatch
  • Construction: Unsupported
  • Sizes: M - XXL
  • Packed: 1 Dozen/Case

AJK

EN 374 Results: AJK
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4102

EN 388 2016 Results: 4102X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 0
Puncture: 2
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Cut Resistant Gloves

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers - Touchscreen Compatible

16-561

  • ANSI Cut Level: A4
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Elastic
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: XXS-2XL
  • Packed: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X43D

EN 388 2016 Results: 4X43DX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-5
ANSI Abrasion Level: 5
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Hi-Vis Apparel

Bisley®

ANSI Type R Class 3 Long Sleeve Work Shirt with X-Airflow™ and Navy Bottom

313M6491H

  • ANSI Type/Class: R3
  • Fabric: Cotton/ Polyester/ Ripstop
  • Reflective Type: Silver
  • Reflective Width: 2"
  • Closure: Buttons
  • Total Pockets: 3
  • Construction: Ripstop, Vented Back
  • Sizes: S-5XL
  • Packed: 20/Case
Type/Class R3

Class R3 apparel is intended for workers requiring the highest level of visibility, have high task loads and need to be visible throughout a full range of body motions.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

FR Clothing BEST SELLER

PIP®

ANSI Type R Class 2 AR/FR Mesh Vest

305-2100

  • AR/FR Class 2 Mesh Modacrylic Vest
  • 4.6 Cal/cm2 HRC 1
  • FR 3M Reflective Material
  • FR Hook & Loop Closure
  • Yellow
  • Sizes: S-5XL
  • Packed: 25/Case
Type/Class R2

Type/Class R2 apparel is necessary for workers exposed to traffic traveling over 25 mph and who work against complex backgrounds.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

ATPV 4.6 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Hi-Vis Apparel

PIP®

ANSI Type R Class 3 Two-Tone Surveyor Eleven Pocket Vest

303-0500

  • ANSI Type/Class: R3
  • Fabric: Mesh/ Solid/ Polyester
  • Reflective Type: Two-Tone
  • Reflective Width: 2"
  • Closure: Zipper
  • Sizes: S-6XL
  • Packed: 50/Case
Type/Class R3

Class R3 apparel is intended for workers requiring the highest level of visibility, have high task loads and need to be visible throughout a full range of body motions.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Safety Helmets

Rocky™

Industrial Climbing Helmet with Mips® Technology, Polycarbonate/ABS Shell, Hi-Density Foam Impact Liner, Nylon Suspension, Wheel Ratchet Adjustment and 4-Point Chin Strap

280-HP142RM

  • ANSI Type: Type II
  • Electrical Class: Class E
  • Shell: Non-Vented
  • Brim Style: Cap Style
  • Shell Material: ABS / Polycarbonate
  • Suspension: 4 Point Nylon Webbing Cradle
  • Size Adjustment: Wheel Ratchet
  • Chin Strap: 4-Point Polyester
  • Construction: MIPS Technology
  • Sizes: OS
  • Packed: 8/Case

Head Protect Access

Traverse™

Clear Polycarbonate Face Shield for Traverse™ Safety Helmets

251-HP1491PF

  • Traverse Clear Polycarbonate Faceshield Only
  • Sizes: OS
  • Packed: 50/Case
Hard Hats

Stromboli™

Type II, Cap Style Smooth Dome Hard Hat with ABS/Polycarbonate Shell, 4-Point Textile Suspension and Wheel Ratchet Adjustment

280-HP842R

  • ANSI Type: Type II
  • Electrical Class: Class E
  • Shell: Non-Vented
  • Brim Style: Cap Style
  • Shell Material: ABS / Polycarbonate
  • Suspension: 4 Point Nylon Webbing Cradle
  • Size Adjustment: Wheel Ratchet
  • Sizes: OS
  • Packed: 12/Case
Leather Drivers BEST SELLER

PIP®

Industry Grade Top Grain Goatskin Leather Drivers Glove - Keystone Thumb

71-3600

  • Hide: Top Grain Goatskin
  • Grade: Industry
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn
  • Sizes: S-XXL
  • Packed: 10 Dozen/Case
Cut Resistant Gloves

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® Glove with Latex Coated Crinkle Grip on Palm & Fingers

09-K1310

  • ANSI Cut Level: A3
  • Liner Material: Kevlar
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Latex
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S - XL
  • Packed: 6 Dozen/Case
ansi-A3
ANSI Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

2444C

EN 388 2016 Results: 2444CX
Abrasion: 2
Cut (Coupe Test): 4
Tear: 4
Puncture: 4
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Protection From Cold

G-Tek® PolyKor®

Seamless Knit PolyKor® Blend Glove with Acrylic Lining and Double-Dip Latex MicroSurface Grip on Palm, Fingers & Knuckles

16-820

  • Liner Material: PolyKor
  • Lining: Acrylic
  • Coating: Latex
  • Coating Coverage: Palm, Fingers & Knuckles
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S - XXL
  • Packed: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X43D

EN 388 2016 Results: 3X43DX
Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

X2X

Protective Gloves Against Cold: X2X
Convective Cold Resistance - X
Contact Cold Resistance - 2
Water Permeability - X

The EN 511 standard specifies the requirements and performance levels of work gloves against cold as low as -50°C. Protective devices against: convective cold, contact cold and water penetration. Convective and contact tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area. Water permeation is grade on a scale of 0 to 1 where 0 indicates “water penetration after 30 minutes” and 1 indicates “no water penetration after 30 minutes”.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Disposable Gloves BEST SELLER

Ambi-dex®

Disposable Nitrile Glove, Powder Free with Textured Grip - 7 mil

2940/XL2XL

  • Grade: Industrial
  • Polymer: Nitrile
  • Thickness: 7 Mil
  • Grip: Textured
  • Powder: Powder Free
  • Box Count: 90
  • Sizes: XL-2XL
  • Packed: 10 Boxes/Case
Absorptive BEST SELLER

Clima-Band™

Absorptive Head & Neck Cover

393-200

  • Clima-Band Multi-Use Head & Neck Band
  • Seamless Stretch Polyester
  • Resists Wind Sun
  • Dust & Odor
  • Quick Dry Machine Washable
  • 10"x 20"
  • Sizes: OS
  • Packed: 300/Case
Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Head Protect Access

Traverse™

Shaded Polycarbonate Front Sun Brim for Traverse™

280-HP1491SUN

  • Sun brim accessory for Traverse™
  • Durable polycarbonate with grip points
  • translucent smoke color
  • Sizes: OS
  • Packed: 10/Case
Leather Palm Gloves

Scrap King™

Seamless Knit HPPE Blended Glove with Split Cowhide Leather Palm and Aramid Stitching - Vend-Ready

09-H550SLPV

  • Hide: Split Cowhide
  • Cuff: Knit Wrist
  • Construction: Seamless Knit, Leather Palm, Reinforced Thumb Crotch
  • Sizes: S-XXL
  • Packed: 72 Pair/Case
ansi-A9
ANSI Cut Level: A9
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X43F

EN 388 2016 Results: 4X43FX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): F
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-6
ANSI Abrasion Level: 6
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Winter Caps & Liners

PIP®

Thermal EXO Dual Layer Balaclava

364-1195

  • Fabric: Polyester
  • Sizes: OS
  • Packed: 144/Case
Safety Glasses BEST SELLER

Zenon Z12™

Rimless Safety Glasses with Black Temple, Gray Lens and Anti-Scratch Coating

250-01-0001

  • Frame Style: Rimless
  • Lens: Tinted
  • Lens Color: Gray
  • Lens Coating: Anti-Scratch
  • Temple: Spatula
  • Base Curve: 9.5
  • Sizes: One Size
  • Packed: 144 Pair/Case
Cut Resistant Gloves

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® / Elastane Glove with Polyurethane Coated Flat Grip on Palm & Fingers

09-K1250

  • ANSI Cut Level: A2
  • Liner Material: Kevlar
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS - XXL
  • Packed: 12 Dozen/Case
ansi-A2
ANSI Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4231B

EN 388 2016 Results: 4231BX
Abrasion: 4
Cut (Coupe Test): 2
Tear: 3
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Cut Resistant Gloves

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with Nitrile Coated MicroSurface Grip on Palm & Fingers - Touchscreen Compatible

16-278

  • ANSI Cut Level: A7
  • Liner Material: PolyKor X7
  • Gauge: 18
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Elastic
  • Construction: Seamless Knit, Touchscreen Compatible
  • Sizes: XS-XXL
  • Packed: 6 Dozen/Case
ansi-A7
ANSI Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42F

EN 388 2016 Results: 4X42FX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Protection From Cold

G-Tek® PolyKor®

Seamless Knit Single-Layer PolyKor®/ Acrylic Blend Glove with Double-Dip Latex MicroSurface Grip on Palm & Fingers

41-8014

  • Liner Material: Acrylic/ PolyKor
  • Coating: Latex
  • Coating Coverage: Palm & Fingers
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-XXL
  • Packed: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X42D

EN 388 2016 Results: 3X42DX
Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

12X

Protective Gloves Against Cold: 12X
Convective Cold Resistance - 1
Contact Cold Resistance - 2
Water Permeability - X

The EN 511 standard specifies the requirements and performance levels of work gloves against cold as low as -50°C. Protective devices against: convective cold, contact cold and water penetration. Convective and contact tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area. Water permeation is grade on a scale of 0 to 1 where 0 indicates “water penetration after 30 minutes” and 1 indicates “no water penetration after 30 minutes”.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Hi-Vis Apparel

PIP®

ANSI Type R Class 3 Long Sleeve T-Shirt

313-1300

  • ANSI Type/Class: R3
  • Fabric: Mesh/ Polyester
  • Reflective Type: Silver
  • Reflective Width: 2"
  • Total Pockets: 1
  • Sizes: S-5XL
  • Packed: 50/Case
Type/Class R3

Class R3 apparel is intended for workers requiring the highest level of visibility, have high task loads and need to be visible throughout a full range of body motions.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Hi-Vis Apparel

PIP®

ANSI Type R Class 2 Dual Sized Value Zipper Mesh Vest

302-V100

  • ANSI Type/Class: R2
  • Fabric: Mesh/ Polyester
  • Reflective Type: Silver
  • Reflective Width: 2"
  • Closure: Zipper
  • Sizes: S/M-6X/7X
  • Packed: 50/Case
Type/Class R2

Type/Class R2 apparel is necessary for workers exposed to traffic traveling over 25 mph and who work against complex backgrounds.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Protection From Cold

G-Tek®

Hi-Vis Seamless Knit Acrylic Glove with Latex Coated Foam Grip on Palm, Fingers & Thumb

41-1420

  • Liner Material: Acrylic
  • Coating: Latex
  • Coating Coverage: Palm & Fingers
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-XL
  • Packed: 6 Dozen/Case

2221

EN 388 2016 Results: 2221XX
Abrasion: 2
Cut (Coupe Test): 2
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

22X

Protective Gloves Against Cold: 22X
Convective Cold Resistance - 2
Contact Cold Resistance - 2
Water Permeability - X

The EN 511 standard specifies the requirements and performance levels of work gloves against cold as low as -50°C. Protective devices against: convective cold, contact cold and water penetration. Convective and contact tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area. Water permeation is grade on a scale of 0 to 1 where 0 indicates “water penetration after 30 minutes” and 1 indicates “no water penetration after 30 minutes”.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Hi Performance Glove

Boss® Xtreme

AR Top Grain Goatskin Leather Drivers Glove with Oil Armor™ Finish and Para-Aramid Lining - TPR Impact Protection

KS993KOAB

  • ARC Rating: 43 cal/cm2
  • Hide: Top Grain Goatskin
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Thumb: Keystone
  • Lining: Aramid
  • Palm: Leather
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X22D

EN 388 2016 Results: 3X22DP
Abrasion: 3
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-impact-2
ANSI Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

ATPV 43 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Over-the-Sock Boots BEST SELLER

Boss® Footwear

16" Black PVC Steel Toe Boot

382-810

  • Steel Toe PVC Waterproof Boot
  • Pre-Formed Insole
  • ASTM F2413
  • Black
  • Sizes: 6-14
  • Packed: 6 Pair/Case
Rainwear BEST SELLER

Viz™

ANSI Type R Class 3 Three-Piece Rainsuit

4033

  • Type R Class 3 Hi Vis Rainsuit
  • Sizes: S-6XL
  • Packed: 10/Case
Type/Class R3

Class R3 apparel is intended for workers requiring the highest level of visibility, have high task loads and need to be visible throughout a full range of body motions.

Head Protect Access

Traverse™

Traverse Eye Shield Quick Connect Attachment Clips

251-HP1491PC

  • Traverse Eye Shield Quick Connect Attachment Clips
  • Sizes: OS
  • Packed: 100/Case
SHOWING 181-216 OF 2771 ITEMS
6 of 77
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL