Products Brands Industries Resources About Us Value Proposition
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety Accessories
Emergency ResponderAccessories FR HoodsFire & Rescue GlovesFire & Rescue Goggle
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionFace ProtectionSafety Eyewear AccessoriesSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidAccessoriesFirst Aid Kit
Foot ProtectionOver-the-ShoeOver-the-Shoe BootsOver-the-SockOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical Resistant GlovesCold Protection GlovesCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHeat Protection GlovesHigh Performance GlovesLeather Drivers GlovesLeather Palm GlovesMetal Mesh GlovesParade & Uniform Gloves
Head ProtectionAccessoriesBump CapsFR HoodsHard HatsSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionDisposable MasksReusable Facepieces
Warning BeaconsFlash Baton
Welding ProtectionAccessoriesFR ClothingHand ProtectionHead Protection
WorkwearWork Apparel

Leaders in
Hand Protection
and PPE

BROWSE ALL PRODUCTS

Search Results For ""

SHOWING 217-252 OF 2771 ITEMS
7 of 77
FR Clothing

PIP®

AR/FR Dual Certified Stretch Jeans – 13.1 cal/cm2

385-FRSJ

  • FR Dual Certified Denim Jean
  • ATPV 13.1 Cal/cm2
  • PPE 2
  • NFPA 70E and NFPA-2112 2023
  • Blue
  • Sizes: 30/30-54/36
  • Packed: 10/Case
Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

ATPV 13.1 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Hi-Vis Apparel

PIP®

ANSI Type R Class 2 Five Pocket Value Mesh Vest with Black Bottom Front

302-0710B

  • ANSI Type/Class: R2
  • Fabric: Mesh/ Polyester
  • Reflective Type: Silver
  • Reflective Width: 2"
  • Closure: Zipper
  • Construction: Black Bottom
  • Sizes: S-5XL
  • Packed: 50/Case
Type/Class R2

Type/Class R2 apparel is necessary for workers exposed to traffic traveling over 25 mph and who work against complex backgrounds.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Hi-Vis Cold Gear

PIP®

3-in-1 Type O Class 1 Ripstop Two-Tone Jacket with Removable Grid Fleece Inner Jacket

331-1772

  • Sizes: M-3XL
  • Packed: 10/Case
Type/Class O1

Class O1 apparel is intended off-road use, to provide added visibility to workers who are not exposed to traffic.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

FR Clothing-Welding BEST SELLER

Ironcat®

FR Treated 100% Cotton Sateen Jacket

7060

  • FR Treated Cotton Sateen Jacket
  • Snap Front Closure
  • Black Collar
  • 2-inch FR Reflective Tape
  • 1 Pocket
  • Orange
  • Sizes: S-6XL
  • Packed: 12/Case
Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Cut Resistant Gloves

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers – Touchscreen Compatible

16-573

  • ANSI Cut Level: A7
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Elastic
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: XS-XXL
  • Packed: 6 Dozen/Case
ansi-A7
ANSI Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X43F

EN 388 2016 Results: 4X43FX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): F
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-6
ANSI Abrasion Level: 6
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Cut Resistant Gloves

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® Glove with Latex Coated Crinkle Grip on Palm & Fingers

09-K1300

  • ANSI Cut Level: A4
  • Liner Material: Kevlar
  • Gauge: 7
  • Weight: Medium Weight
  • Coating: Latex
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S - XXL
  • Packed: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3544D

EN 388 2016 Results: 3544DX
Abrasion: 3
Cut (Coupe Test): 5
Tear: 4
Puncture: 4
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Protection From Heat BEST SELLER

PIP®

DuPont™ Kevlar® / Cotton Seamless Knit Hot Mill Glove with Cotton Liner and Double-Sided EverGrip™ Nitrile Coating - 24 oz

43-552

  • Liner Material: Cotton/ Kevlar
  • Weight: 24oz
  • Coating: Nitrile
  • Coating Coverage: One Side
  • Grip: Pattern
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: S & L
  • Packed: 8 Dozen/Case
ansi-A3
ANSI Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Safety Helmets

Rocky™

Industrial Climbing Helmet with Polycarbonate / ABS Shell, Nylon Suspension, Wheel Ratchet Adjustment and 4-Point Chin Strap

280-HP141R

  • ANSI Type: Type I
  • Electrical Class: Class E
  • Shell: Non-Vented
  • Brim Style: Cap Style
  • Shell Material: ABS / Polycarbonate
  • Suspension: 4 Point Nylon Webbing Cradle
  • Size Adjustment: Wheel Ratchet
  • Chin Strap: 4-Point Polyester
  • Sizes: OS
  • Packed: 8/Case
Hi-Vis Apparel

Bisley®

ANSI Type R Class 2 Short Sleeve T-Shirt with Navy Bottom

312M1118T

  • ANSI Type/Class: R2
  • Fabric: Cotton/ Polyester
  • Reflective Type: Silver
  • Reflective Width: 2"
  • Total Pockets: 1
  • Sizes: S-5XL
  • Packed: 20/Case
Type/Class R2

Type/Class R2 apparel is necessary for workers exposed to traffic traveling over 25 mph and who work against complex backgrounds.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Hi Performance Glove BEST SELLER

Boss®

Green Corded Cotton Palm and Spandex Back – TPR Impact Protection

120-MP2100

  • Liner Material: Cotton
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Palm: Polycord Canvas
  • Cuff: Elastic
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn, Reinforced Thumb Crotch
  • Sizes: M-3XL
  • Packed: 72 Pair/Case
ansi-A2
ANSI Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

1X21B

EN 388 2016 Results: 1X21BP
Abrasion: 1
Cut (Coupe Test): X
Tear: 2
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-impact-2
ANSI Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Cut Resistant Gloves BEST SELLER

Barracuda®

Seamless Knit Polykor Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers

715HNFR

  • ANSI Cut Level: A3
  • Liner Material: PolyKor
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch
  • Sizes: XS-2XL
  • Packed: 10 Dozen/Case
ansi-A3
ANSI Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4542C

EN 388 2016 Results: 4542CX
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Over-the-Shoe Boots BEST SELLER

Boss®

Yellow Slush Boot

2KP4481

  • BOSS RUBBER OVER-THE-SHOE SLUSH KNEE BOOTS 17 INCH YELLOW
  • Sizes: 7-18
  • Packed: 6 Pair/Case
Chemical Resistant

Assurance®

Unsupported Latex, Industrial Flock Lined with Raised Diamond Grip - 21 Mil

48-L212Y

  • Polymer: Latex
  • Thickness: 21 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Rolled
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: XS - XL
  • Packed: 12 Dozen/Case

ABK

EN 374 Results: ABK
A: Methanol
B: Acetone
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

1020

EN 388 2016 Results: 1020XX
Abrasion: 1
Cut (Coupe Test): 0
Tear: 2
Puncture: 0
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Safety Helmets NEW

Kilimanjaro™

Type II Full Brim Safety Helmet with HDPE Shell, 4-Point Textile Suspension, Wheel Ratchet Adjustment and 4-Point Chinstrap

280-HP642R-CH

  • ANSI Type: Type II
  • Electrical Class: Class E
  • Shell: Non-Vented
  • Brim Style: Full
  • Shell Material: HDPE
  • Suspension: 4 Point Nylon Webbing Cradle
  • Size Adjustment: Wheel Ratchet
  • Chin Strap: 4-Point Polyester
  • Sizes: OS
  • Packed: 12/Case
Evaporative Cooling BEST SELLER

EZ-Cool® Max

Evaporative Cooling Sleeve

391-EZ275

  • EZ Cool Max Evaporative Cooling Sleeves
  • UPF 40+
  • Durable Stretch
  • Breathable
  • Chemical Free
  • Lime Yellow and Black
  • Sizes: M/L, XL/2XL
  • Packed: 300 Pair/Case
Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Cut Resistant Gloves

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® Glove with Nitrile Coated Smooth Grip on Palm & Fingers - Medium Weight

09-K1400

  • ANSI Cut Level: A2
  • Liner Material: Kevlar
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS - XL
  • Packed: 6 Dozen/Case
ansi-A2
ANSI Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

2342B

EN 388 2016 Results: 2342BX
Abrasion: 2
Cut (Coupe Test): 3
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Head Protect Access

Traverse™

Reflective kit for Traverse™ safety helmet

280-HP1491KIT

  • Reflective Sticker Kit for Traverse
  • Reflective Sticker Kit Installation Guide In Sell Sheet Below
  • Sizes: OS
  • Packed: 100/Case
Over-the-Shoe Boots BEST SELLER

Boss®

Yellow Latex Boot

8400

  • Waterproof Latex Boot
  • 12-inch
  • Yellow
  • Textured Sole
  • Sizes: M-2XL
  • Packed: 50 Pair/Case
Safety Glasses BEST SELLER

Recon™

Rimless Safety Glasses with Clear Temple, Clear Lens and Anti-Scratch / Anti-Fog Coating

250-32-0020

  • Frame Style: Rimless
  • Lens: Clear
  • Lens Color: Clear
  • Lens Coating: Anti-Scratch, Anti-Fog
  • Temple: Bayonet
  • Base Curve: 9
  • Sizes: OS
  • Packed: 144 Pair/Case
Safety Glasses

Fortify™

Rimless Safety Glasses with Gray Frame, Clear Lens, Foam Padding and Anti-Scratch / Anti-Fog Coating

250-54-0020

  • Frame Style: Foam-Lined
  • Lens: Clear
  • Lens Color: Clear
  • Lens Coating: Anti-Scratch, Anti-Fog
  • Temple: Co-Molded
  • Base Curve: 9
  • Sizes: One Size
  • Packed: 144 Pair/Case
Hi Performance Glove

R15™

Synthetic Leather Palm with Silicone Grip and Fabric Back - TPR Impact Protection

87015

  • Liner Material: Spandex
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Coating: PVC
  • Grip: Silicone
  • Palm: Reinforced
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
ansi-A6
ANSI Cut Level: A6
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X43F

EN 388 2016 Results: 4X43FP
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): F
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-impact-2
ANSI Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

ANSI Contact Heat Level: 1
Test Method: ASTM F1060-18
Temperature: 176°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Protection From Heat

Kut Gard®

DuPont™ Kevlar® / Preox Seamless Knit Hot Mill Glove with Cotton Liner - Extended Cuff

43-858

  • Liner Material: Kevlar/ Preox
  • Lining: Cotton Terry
  • Weight: 32oz
  • Cuff: Knit Wrist
  • Length: 15"
  • Construction: Seamless Knit, Extended Cuff
  • Sizes: L
  • Packed: 24/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Ear Plugs BEST SELLER

EZ-Twist™

Disposable Soft Polyurethane Foam Corded Ear Plugs - NRR 30 / SNR 38

267-HPF610C

  • Hearing Style: Corded
  • Box Count: 100
  • Ear Plug Material: Polyurethane Foam
  • Shape: Barrel Push-In
  • Cord Material: PVC
  • NRR Rating: 30
  • SNR Rating: 38
  • SLC 80: 25
  • SLC 80 Class: 4
  • Sizes: OSFM
  • Packed: 10 Boxes/Case
Hi-Vis Cold Gear

PIP®

ANSI Type R Class 3 Reversible Full Zip Hooded Sweatshirt with Black Bottom

323-1400S

  • Sizes: S-5XL
  • Packed: 10/Case
Type/Class R3

Class R3 apparel is intended for workers requiring the highest level of visibility, have high task loads and need to be visible throughout a full range of body motions.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Safety Helmets

Traverse™

Vented, Industrial Climbing Helmet, Type I, ABS Shell, EPS Foam Impact Liner, Wheel Ratchet Adjustment, with 4-Point Chin Strap

280-HP1490RV

  • ANSI Type: Type I
  • Electrical Class: Class C
  • Shell: Vented
  • Brim Style: Cap Style
  • Shell Material: ABS
  • Suspension: Foam Cradle System
  • Size Adjustment: Wheel Ratchet
  • Chin Strap: 4-Point Polyester
  • Sizes: OS
  • Packed: 18/Case
Knee Protection

PIP®

Clear Flat Cap Gel Knee Pads

291-130

  • Flat Cap Gel Knee Pads
  • Clear on Black
  • Anti-Slip
  • Hook & Loop Closure Straps
  • Pair-Packed
  • Sizes: One Size
  • Packed: 12 Pair/Case
Hi-Vis Cold Gear

PIP®

ANSI Type R Class 3 Hooded Pullover Sweatshirt with Black Bottom

323-1350B

  • Sizes: S-5XL
  • Packed: 20/Case
Type/Class R3

Class R3 apparel is intended for workers requiring the highest level of visibility, have high task loads and need to be visible throughout a full range of body motions.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Chemical Resistant

XtraTuff™

Cold Resistant PVC Glove with Detachable Acrylic Liner and Sandy Coating - Insulated & Waterproof

58-8658DL

  • Polymer: PVC
  • Lining: Acrylic
  • Length: 12"
  • Cuff: Straight
  • Grip: Rough
  • Coating Coverage: Full Hand
  • Liner Material: Interlock/ Terry Cloth
  • Construction: Seamless Knit, Supported
  • Sizes: L - XXL
  • Packed: 6 Dozen/Case

AJK

EN 374 Results: AJK
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Over-the-Sock Boots BEST SELLER

Boss® Footwear

16" Black PVC Plain Toe Boot

380-800

  • Plain Toe Waterproof PVC Boot
  • Pre-Formed Insole
  • Black
  • Sizes: 6-14
  • Packed: 6 Pair/Case
Metal Mesh Gloves BEST SELLER

US Mesh®

Stainless Steel Mesh Glove with Adjustable Strap - Wrist Length

USM-1105

  • Stainless Steel Ring Mesh Glove with Web Sewn on Strap
  • Sizes: 2XS-3XL
  • Packed: 1/Case
Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Ext-Use Disposables

Grippaz™ Skins

Extended Use Ambidextrous Nitrile Glove with Textured Fish Scale Grip - 4.5 Mil

67-305

  • Grade: Superior
  • Polymer: Nitrile
  • Thickness: 4.5 Mil
  • Grip: Fish Scale
  • Powder: Powder Free
  • Construction: ESD Safe, Touchscreen Compatible
  • Box Count: 100
  • Sizes: S-XXXL
  • Packed: 10 Boxes/Case

JKTP

EN 374 Results: JKTP
J: Heptane
K: Sodium Hydroxide 40%
T: Formaldehyde 37%
P: Hydrogen Peroxide 30%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

ESD Safe

ESD is an acronym for electrostatic discharge. This discharge is the rapid transfer of static between two different objects. Although ESD doesn’t typically cause harm to the human body - you might only experience it as a small, surprising shock - it can cause extensive damage to electrical equipment and sensitive instruments. This damage may either be permanent, causing the device to malfunction (known as a catastrophic failure), or it may occur on a smaller scale that would be difficult to detect before the device is sent out for service (known as latent defect).

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Rainwear

ChemFR™

Treated PVC Coverall with Hood - 0.42 mm

205-420CV

  • .42mm PVC/High Strength Heavy Duty Nylon/PVC Coverall
  • Inner Cuff
  • Attached Hood
  • ASTM D6413 Limited Flammability
  • Green
  • Sizes: S-5X
  • Packed: 10/Case
Sun Protection BEST SELLER

EZ-Cool®

FR Treated Hi-Vis Hard Hat Visor and Neck Shade

396-801FR

  • EZ-Cool Hard Hat Visor
  • Hi-Vis Yellow
  • Elastic Back
  • Silver Reflective Tape
  • FR Treated Polyester
  • 25 Washes
  • Universal Fit
  • Sizes: One size
  • Packed: 144/Case
Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Cut Resistant Gloves

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers

09-K1630

  • ANSI Cut Level: A4
  • Liner Material: Kevlar
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S - XXL
  • Packed: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X31D

EN 388 2016 Results: 4X31DX
Abrasion: 4
Cut (Coupe Test): X
Tear: 3
Puncture: 1
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Hi-Vis Cold Gear

PIP®

ANSI Type R Class 3 7-in-1 All Conditions Coat with Inner Jacket and Vest Combination

343-1756

  • Sizes: S-5XL
  • Packed: 10/Case
Type/Class R3

Class R3 apparel is intended for workers requiring the highest level of visibility, have high task loads and need to be visible throughout a full range of body motions.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Hi Performance Glove

Boss® Utility

Synthetic Microfiber Palm with Mesh Fabric Back

120-MU1220T

  • Liner Material: Spandex
  • Coating: Uncoated
  • Palm: Synthetic Leather
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn, Touchscreen Compatible, Adjustable Straps
  • Sizes: S-2XL
  • Packed: 72 Pair/Case

3121

EN 388 2016 Results: 3121X
Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

SHOWING 217-252 OF 2771 ITEMS
7 of 77
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL