Products Brands Industries Resources About Us Value Proposition
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE ApronCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety Accessories
Emergency ResponderFR HoodsFire & Rescue GlovesFire & Rescue Goggle
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionEyewear AccessoriesFace ProtectionSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidEyewashFirst Aid Kit
Foot ProtectionOver-the-Shoe BootsOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical ResistantCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHi Performance GloveLeather DriversLeather Palm GlovesMetal Mesh GlovesParade GlovesProtection From ColdProtection From Heat
Head ProtectionBump CapsFR HoodsHard HatsHead Protect AccessoriesSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHi-Vis RainwearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionDisposable MasksReusable Facepieces
Warning BeaconsFlash Baton
Welding ProtectionFR ClothingHand ProtectionWelding Accessory
WorkwearWork Apparel

Protection Does NOT End At The Wrist

PIP® is one of the largest manufacturers of cut resistant arm protection in the USA. Our products are manufactured using a variety of yarns containing advanced fibers such as DuPont Kevlar®, Dyneema® and many other proprietary engineered yarn blends. The use of Cut-Resistant sleeves has increased considerably over the years, and we've led the charge with the introductions of new yarns, sustainable technologies and tailored customizations.

ARM PROTECTION

Cut Resistant Sleeve (43)

VIEW:
All
  • Description
  • Bullets
  • Icons
  • Hide All
SORT:
CLEAR ALL
Cut Level A4
1-Ply Machine Knit

Kut Gard®

ATA® / HPPE Blended Sleeve with Hook and Loop Closure with Thumb Hole

20-S13ATA/PE4-T-VEL

  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Velcro Closure
  • Construction: Machine Knit
  • Sizes: 18" + 22"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare
1-Ply Machine Knit

Kut Gard®

ATA Technology, HPPE, 13 Gauge, ANSI A4 Sleeve with Top of Arm Hook and Loop Closure

20-S13ATA/PE4HVOTVEL

  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Velcro Closure
  • Construction: Machine Knit
  • Sizes: 18", 22"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare
2-Ply Cane Mesh

Kut Gard®

2-Ply Nylon Cane Mesh Sleeve - 9"

30-6795B

  • Cut Level: A4
  • ANSI Abrasion Level: 2
  • Ply: 2-Ply
  • Liner Material: Nylon Cane Mesh
  • Top of Arm: Velcro Closure
  • Construction: Cut-and-Sewn
  • Sizes: 9"
  • Packed: 72 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
2-Ply Tube Knit

Claw Cover®

2-Ply ACP / Dyneema® Blended Sleeve

20-DA

  • Cut Level: A4
  • Ply: 2-Ply
  • Liner Material: ACP/ Dyneema
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 10"-24"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
1-Ply Smart Fit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® Blended Sleeve with Smart-Fit® and Thumb Hole

10-21KVACPMBKTH

  • Cut Level: A4
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ACP/ Kevlar
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Plush Top Elastic
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 18"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
Rubber

Kut Gard®

AR/FR Single-Ply DuPont™ Kevlar® / Nomex® Xtreme Arc Cut Fiber Blended Sleeve

S13ARCGY/N4

  • PPE Category: 2
  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: Kevlar
  • Top of Arm: Overstitched Elastic
  • Construction: Tube Knit
  • Sizes: 18
  • Packed: 72/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

 
APTV 15.2 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Compare
1-Ply Smart Fit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® / Pritex™ Blended Sleeve with Antimicrobial Fibers and Smart-Fit®

15-21KVBK

  • Cut Level: A4
  • Ply: Single-Ply
  • Liner Material: ACP/ Antimicrobial/ Kevlar/ Pritex
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 14"-24"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
1-Ply Machine Knit

Kut Gard®

ATA®/ HPPE Blended Sleeve with Thumb Hole

20-S13ATA/PE4-T

  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Overstitched Elastic
  • Construction: Machine Knit
  • Sizes: 18"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare
1-Ply Smart Fit

Kut Gard®

Single-Ply ACP / Dyneema® Blended Sleeve with Smart-Fit® and Thumb Hole

20-21DACPBPTH

  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • Ply: Single-Ply
  • Liner Material: ACP/ Dyneema
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 14-24
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
1-Ply Machine Knit

Kut Gard®

ATA® / HPPE Blended Sleeve with Hook and Loop Closure

20-S13ATA/PE4-VEL

  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Top of Arm: Velcro Closure
  • Construction: Machine Knit
  • Sizes: 18", 22"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare
1-Ply Machine Knit

Kut Gard®

ATA®/ HPPE Blended Sleeve

20-S13ATA/PE4

  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Top of Arm: Overstitched Elastic
  • Construction: Machine Knit
  • Sizes: 18"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare
1-Ply Tube Knit

Kut Gard®

AR/FR Single-Ply DuPont™ Kevlar® / Nomex® Xtreme Arc Cut Fiber Blended Sleeve with Thumb Hole

S13ARCGY/N4-T

  • PPE Category: 2
  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: Kevlar
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Overstitched Elastic
  • Construction: Tube Knit
  • Sizes: 18
  • Packed: 72/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

 
15.2 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Compare
1-Ply Machine Knit

Kut Gard®

Single-Ply ATA® / Hide-Away™ FR Blended Sleeve with Thumb Hole

S13ATAFR/4HA-ES6-T

  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: Aramid/ ATA Fiber Technology/ Stainless Steel Wire
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Non-Slip
  • Construction: Machine Knit, Seamless Knit
  • Sizes: 18, 22
  • Packed: 72/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply Smart Fit

Kut Gard®

Single-Ply ACP / Dyneema® Blended Sleeve with Smart-Fit® and Thumb Hole

20-21DACPBPTHPT

  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • Ply: Single-Ply
  • Liner Material: ACP/ Dyneema
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Plush Top Elastic
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 18"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
1-Ply Smart Fit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® Blended Sleeve with Smart-Fit®

10-21KVACPMBK

  • Cut Level: A4
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ACP/ Kevlar
  • Top of Arm: Plush Top Elastic
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 18"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
2-Ply Cane Mesh

Kut Gard®

2-Ply Nylon Cane Mesh Sleeve - 9"

30-6795W

  • Cut Level: A4
  • ANSI Abrasion Level: 2
  • Ply: 2-Ply
  • Liner Material: Nylon Cane Mesh
  • Top of Arm: Velcro Closure
  • Construction: Cut-and-Sewn
  • Sizes: 9"
  • Packed: 72 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
1-Ply Machine Knit

Kut Gard®

ATA Technology 13G Wide Sleeve with Thumb Hole, B/G Elastic Top

20-S13ATA/PE4-EW-T-BG

  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE/ Polyester
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Blue/Gold Elastic
  • Construction: Machine Knit
  • Sizes: 22
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare
1-Ply Smart Fit

Kut Gard®

Single-Ply ACP / Dyneema® Blended Sleeve with Smart-Fit®

20-21DACPBP

  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • Ply: Single-Ply
  • Liner Material: ACP/ Dyneema
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 18"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
1-Ply Machine Knit

Kut Gard®

Single-Ply ATA® / Sta-Cool™ Blended Sleeve

S10ATAFRCM/4-ES6

  • Cut Level: A4
  • ANSI Abrasion Level: 2
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Aramid/ Sta-Cool
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Non-Slip
  • Construction: Machine Knit, Seamless Knit
  • Sizes: 18, 22
  • Packed: 72/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply Machine Knit

Kut Gard®

ATA Technology 13-Gauge Standard Width Knit Sleeve, Knit Wrist, Thumb Hole, Gray, with Black/White Elastic

20-S13ATA/PE4-T-BW

  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: Antimicrobial, Machine Knit
  • Sizes: 22
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare
1-Ply Machine Knit

Kut Gard®

Single-Ply ATA® / Sta-Cool™ Blended Sleeve with Thumb Hole

S10ATAFRCM/4-ES6-T

  • Cut Level: A4
  • ANSI Abrasion Level: 2
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Aramid/ Sta-Cool
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Non-Slip
  • Construction: Machine Knit, Seamless Knit
  • Sizes: 18, 22
  • Packed: 72/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply Smart Fit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® / Pritex™ Blended Sleeve with Antimicrobial Fibers, Smart-Fit® and Elastic Thumb

15-21KVBK-ET

  • Cut Level: A4
  • Ply: Single-Ply
  • Liner Material: ACP/ Antimicrobial/ Kevlar/ Pritex
  • Finger & Thumb: Elastic Thumb
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 18
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
1-Ply 2x2_5 Tube Knit

Kut Gard®

2-Ply ATA® Blended Sleeve with Sta-COOL™ Liner with Thumb Hole

MSATACM2X2.5-T

  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • Ply: 2-Ply
  • Liner Material: HPPE/ Stainless Steel Wire/ Sta-Cool
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 14"-24"
  • Packed: 200/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
1-Ply Smart Fit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® Blended Sleeve with Smart-Fit® and Elastic Thumb

10-21KVACPMBK-ET

  • Cut Level: A4
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ACP/ Kevlar
  • Finger & Thumb: Elastic Thumb
  • Top of Arm: Plush Top Elastic
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 18"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
2-Ply Tube Knit

Kut Gard®

2-Ply ACP / Dyneema® Blended Sleeve with Thumb Hole

20-DATO

  • Cut Level: A4
  • Ply: 2-Ply
  • Liner Material: ACP/ Dyneema
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 18"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
1-Ply Machine Knit

Kut Gard®

ATA Technology, HPPE, 13 Gauge, ANSI A4 Sleeve with Top of Arm Hook and Loop Closure

20-S13ATA/PE4HVO-VEL

  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Top of Arm: Velcro Closure
  • Construction: Machine Knit
  • Sizes: 18", 22"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare
1-Ply Smart Fit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® / Pritex™ Blended Sleeve with Antimicrobial Fibers, Smart-Fit® and Thumb Hole

15-21KVBKTH

  • Cut Level: A4
  • Ply: Single-Ply
  • Liner Material: ACP/ Antimicrobial/ Kevlar/ Pritex
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 14", 16", 18"
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
1-Ply Machine Knit

Kut Gard®

ATA Tech, 13G Narrow Sleeve, TH, G/G Elastic Top

20-S13ATA/PE4-NW-T-GG

  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE/ Stainless Steel Wire
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: Antimicrobial, Machine Knit
  • Sizes: 22
  • Packed: 144/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare
1-Ply Machine Knit

Kut Gard®

Single-Ply ATA® Blended Sleeve with Cotton Plating

MSATAC

  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Aramid/ Cotton
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 14"-18"
  • Packed: 200/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
1-Ply Machine Knit

Kut Gard®

Single-Ply ATA® / Hide-Away™ FR Blended Sleeve with Thumb Hole - Wide Width

S13ATAFR/4HA-EW-ES6T

  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Aramid/ Stainless Steel Wire
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Non-Slip
  • Construction: Machine Knit, Seamless Knit
  • Sizes: 18, 22
  • Packed: 72/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply 2x2 Tube Knit

Kut Gard®

Single-Ply ATA® Ultra Blended Sleeve with Thumb Hole

MS1ATA2X2.5-T

  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Aramid
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 18"
  • Packed: 200/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
1-Ply Machine Knit

Kut Gard®

Single-Ply ATA® / Sta-Cool™ Blended Sleeve - Wide Width

S10ATAFRCM/4-EW-ES6

  • Cut Level: A4
  • ANSI Abrasion Level: 2
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Aramid/ Sta-Cool
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Non-Slip
  • Construction: Machine Knit, Seamless Knit
  • Sizes: 18, 22
  • Packed: 72/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply Machine Knit

Kut Gard®

Single-Ply ATA® / Sta-Cool™ Blended Sleeve with Thumb Hole - Wide Width

S10ATAFRCM/4-EW-ES6T

  • Cut Level: A4
  • ANSI Abrasion Level: 2
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Aramid/ Sta-Cool
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Non-Slip
  • Construction: Machine Knit, Seamless Knit
  • Sizes: 18, 22
  • Packed: 72/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply Machine Knit

Kut Gard®

Single-Ply ATA® / Sta-Cool™ Blended Sleeve - Narrow Width

S10ATAFRCM/4-NW-ES6

  • Cut Level: A4
  • ANSI Abrasion Level: 2
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Aramid/ Sta-Cool
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Non-Slip
  • Construction: Machine Knit, Seamless Knit
  • Sizes: 18, 22
  • Packed: 72/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply 2x2_5 Tube Knit

Kut Gard®

2-Ply ATA® Blended Sleeve with Sta-COOL™ Liner

MSATACM2X2.5

  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • Ply: 2-Ply
  • Liner Material: HPPE/ Stainless Steel Wire/ Sta-Cool
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 18"
  • Packed: 200/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
1-Ply 2x1 Tube Knit

Kut Gard®

Single-Ply ATA® Blended with Aramid Sleeve with Sewn-On Knit Wrist and Thumb Hole

S-2X1-H

  • PPE Category: 2
  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Aramid
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 22"
  • Packed: 100/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ATPV 8.0 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Compare
SHOWING 1-36 OF 43 ITEMS
1 of 2
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL