Products Brands Industries Resources About Us Value Proposition
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE ApronCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety Accessories
Emergency ResponderFR HoodsFire & Rescue GlovesFire & Rescue Goggle
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionEyewear AccessoriesFace ProtectionSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidEyewashFirst Aid Kit
Foot ProtectionOver-the-Shoe BootsOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical ResistantCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHi Performance GloveLeather DriversLeather Palm GlovesMetal Mesh GlovesParade GlovesProtection From ColdProtection From Heat
Head ProtectionBump CapsFR HoodsHard HatsHead Protect AccessoriesSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHi-Vis RainwearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionDisposable MasksReusable Facepieces
Warning BeaconsFlash Baton
Welding ProtectionFR ClothingHand ProtectionWelding Accessory
WorkwearWork Apparel

Tried & True Protection

PIP is very diligent about the grades of hides that it specifies and offers for its numerous styles of leather gloves used in multiple general handling applications. Further to this, we pay strict attention to all aspects of the cut and sew confection. There are many providers of leather gloves around the world. PIP has over 60 quality control personnel for on-site inspection. We believe this makes all the difference for peace of mind and a consistent product.

HAND PROTECTION

Leather Drivers Gloves (47)

VIEW:
All
  • Description
  • Bullets
  • Icons
  • Hide All
SORT:
CLEAR ALL
Keystone Thumb
Wing Thumb
Leather Drivers

Boss®

Top Grain Goatskin Leather Drivers Glove with Kevlar® Blend Lining and Hi-Vis Impact Protection

9916

  • Cut Level: A7
  • Hide: Top Grain Goatskin
  • Thumb: Wing
  • Lining: Kevlar
  • Construction: Cut-and-Sewn, Reinforced Thumb Crotch
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 1

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

3X44FP
EN 388 2016 Results: 3X44FP
Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 4
Cut (TDM-100 Test): F
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Top Grain Goatskin Drivers

Boss® Xtreme

AR Top Grain Goatskin Leather Drivers Glove with Oil Armor™ Finish and Para-Aramid Lining - TPR Impact Protection

KS993KOAB

  • Cut Level: A4
  • Hide: Top Grain Goatskin
  • Thumb: Keystone
  • Cuff: Slip-on
  • Lining: Aramid
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

 
ATPV 43 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

3X22DP
EN 388 2016 Results: 3X22DP
Abrasion: 3
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Leather Drivers

Boss®

Top Grain Sheepskin Leather Drivers Glove with Para-Aramid Blend Lining and Impact Protection

9120

  • Cut Level: A4
  • Hide: Top Grain Sheepskin
  • Thumb: Keystone
  • Cuff: Slip-on
  • Lining: Aramid
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

2X22DP
EN 388 2016 Results: 2X22DP
Abrasion: 2
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Top Grain Goatskin Drivers

Boss® Xtreme

AR Top Grain Goatskin Leather Drivers Glove with Oil Armor™ Finish and Para-Aramid Lining - Keystone Thumb

KS993KOA

  • Cut Level: A4
  • Hide: Top Grain Goatskin
  • Thumb: Keystone
  • Cuff: Slip-on
  • Lining: Aramid
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
ATPV 43 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

3X22DX
EN 388 2016 Results: 3X22DX
Abrasion: 3
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Top Grain Cowhide Drivers

Boss® Xtreme

AR Top Grain Cowhide Leather Drivers Glove with Para-Aramid Lining - Keystone Thumb

KS992K

  • Cut Level: A4
  • Hide: Top Grain Cowhide
  • Thumb: Keystone
  • Cuff: Slip-on
  • Lining: Aramid
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
ATPV 43 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

3X32D
EN 388 2016 Results: 3X32D
Abrasion: 3
Cut (Coupe Test): X
Tear: 3
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Top Grain Cowhide

PIP®

Regular Grade Top Grain Cowhide Leather Drivers Glove - Keystone Thumb

68-163

  • Hide: Top Grain Cowhide
  • Grade: Regular
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn
  • Sizes: XS-XXXL
  • Packed: 10 Dozen/Case
Compare
Leather Drivers

Boss®

Top Grain Goatskin Leather Drivers Glove with UHMWPE Blend Lining and Hi-Vis Impact Protection

09-LC571MP

  • Cut Level: A5
  • Hide: Top Grain Goatskin
  • Thumb: Keystone
  • Cuff: Slip-on
  • Lining: HPPE
  • Construction: Cut-and-Sewn
  • Sizes: M-3XL
  • Packed: 36 Pair/Case
 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

4X43EP
EN 388 2016 Results: 4X43EP
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): E
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Top Grain Goatskin Drivers

Boss® Xtreme

AR Rated Top Grain Goatskin Leather Drivers Glove with Para-Aramid Lining - Keystone Thumb

09-LC533AR

  • Cut Level: A5
  • Hide: Top Grain Goatskin
  • Thumb: Keystone
  • Cuff: Slip-on
  • Lining: Aramid
  • Construction: Cut-and-Sewn
  • Sizes: M-3XL
  • Packed: 6 Dozen/Case
 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
44 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

2X32E
EN 388 2016 Results: 2X32E
Abrasion: 2
Cut (Coupe Test): X
Tear: 3
Puncture: 2
Cut (TDM-100 Test): E
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Top Grain Cowhide

PIP®

Economy Grade Top Grain Cowhide Leather Drivers Glove - Keystone Thumb

68-162

  • Hide: Top Grain Cowhide
  • Grade: Economy
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn
  • Sizes: S - XXL
  • Packed: 10 Dozen/Case
Compare
Top Grain Cowhide

PIP®

Economy Grade Top Grain Cowhide Leather Drivers Glove with Hi-Vis Fingertips and "WATCH YOUR HANDS"- Keystone Thumb

68-162HV

  • Hide: Top Grain Cowhide
  • Grade: Economy
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn, Hi-Vis Fingertips
  • Sizes: S-XXL
  • Packed: 10 Dozen/Case
Compare
Lined Top Grain Pigskin

PIP®

Economy Top Grain Pigskin Leather Drivers Glove with Red Fleece Lining - Keystone Thumb

994KF

  • Hide: Top Grain Pigskin
  • Grade: Economy
  • Thumb: Keystone
  • Cuff: Slip-on
  • Lining: Fleece
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 10 Dozen/Case
Compare
Lined Top Grain Pigskin

PIP®

Top Grain Pigskin Leather Drivers Glove with Natural Thermal Lining - Keystone Thumb

994KP

  • Hide: Top Grain Pigskin
  • Grade: Premium
  • Thumb: Keystone
  • Cuff: Slip-on
  • Lining: Thermal
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 10 Dozen/Case
Compare
Leather Drivers Gloves

Caiman®

Premium Top Grain Cowhide Leather Drivers Glove - Keystone Thumb and Water Resistant

1304

  • Hide: Top Grain Cowhide
  • Grade: Premium
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Nylon
  • Lining: Unlined
  • Construction: Cut-and-Sewn, Reinforced Wear Points
  • Sizes: S-XL
  • Packed: 120 Pair/Case
Compare
Top Grain Goatskin

PIP®

Industry Grade Top Grain Goatskin Leather Drivers Glove - Keystone Thumb

71-3600

  • Hide: Top Grain Goatskin
  • Grade: Industry
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn
  • Sizes: S-XXL
  • Packed: 10 Dozen/Case
Compare
Lined Top Grain Cowhide

PIP®

Premium Top Grain Cowhide Leather Drivers Glove with 3M™ Thinsulate™ Lining - Keystone Thumb

77-269

  • Hide: Top Grain Cowhide
  • Grade: Regular
  • Thumb: Keystone
  • Cuff: Slip-on
  • Lining: 3M Thinsulate
  • Construction: Cut-and-Sewn, Leather Palm
  • Sizes: S - XL
  • Packed: 6 Dozen/Case
Compare
Lined Top Grain Cowhide

PIP®

Top Grain Cowhide Leather Drivers Glove with Red Foam Lining - Keystone Thumb

77-268

  • Hide: Top Grain Cowhide
  • Grade: Regular
  • Thumb: Keystone
  • Cuff: Slip-on
  • Lining: Red Foam
  • Construction: Cut-and-Sewn
  • Sizes: S - XL
  • Packed: 6 Dozen/Case
Compare
Leather Drivers Gloves

Caiman®

Premium Gold Goat Grain Leather Drivers Glove - Kontour™ Design

1340

  • Hide: Top Grain Goatskin
  • Grade: Premium
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Standard
  • Construction: Cut-and-Sewn
  • Sizes: S-XL
  • Packed: 120 Pair/Case
Compare
Lined Top Grain Cowhide

PIP®

Economy Top Grain Cowhide Leather Drivers Glove with Natural Thermal Lining - Keystone Thumb

77-265

  • Hide: Top Grain Cowhide
  • Grade: Economy
  • Thumb: Keystone
  • Cuff: Slip-on
  • Lining: Thermal
  • Construction: Cut-and-Sewn
  • Sizes: S-XL
  • Packed: 6 Dozen/Case
Compare
Leather Drivers

Boss®

Top Grain Leather Drivers Glove with Split Cowhide Back, Kevlar® Stitching and Hi-Vis Impact TPR

997KB

  • Hide: Top Grain Cowhide
  • Thumb: Keystone
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: XS-3XL
  • Packed: 72 Pair/Case
 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

2132XP
EN 388 2016 Results: 2132XP
Abrasion: 2
Cut (Coupe Test): 1
Tear: 3
Puncture: 2
Cut (TDM-100 Test): X
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Leather Drivers

Boss®

Top Grain Leather Drivers Glove with Split Cowhide Back, Kevlar® Stitching and Hi-Vis Impact TPR - Cotton Liner

997KBC

  • Hide: Top Grain Cowhide
  • Thumb: Keystone
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

2132XP
EN 388 2016 Results: 2132XP
Abrasion: 2
Cut (Coupe Test): 1
Tear: 3
Puncture: 2
Cut (TDM-100 Test): X
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Lined Top Grain Pigskin

PIP®

Top Grain Pigskin Leather Drivers Glove with Black Thermal Lining and Hi-Vis Fingertips & WYH Logo

994KOTP

  • Hide: Top Grain Pigskin
  • Grade: Premium
  • Thumb: Keystone
  • Cuff: Slip-on
  • Lining: Thermal
  • Construction: Cut-and-Sewn, Hi-Vis Fingertips
  • Sizes: S-2XL
  • Packed: 10 Dozen/Case
Compare
Top Grain Cowhide

PIP®

Regular Grade Top Grain Leather Drivers Glove with Split Cowhide Back - Keystone Thumb

68-161SB

  • Hide: Top Grain Cowhide
  • Grade: Regular
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn
  • Sizes: S - XL
  • Packed: 10 Dozen/Case
Compare
Top Grain Deerskin

PIP®

Premium Top Grain Deerskin Leather Drivers Glove with 3M™ Thinsulate™ Lining - Keystone Thumb

9920KT

  • Hide: Top Grain Deerskin
  • Grade: Premium
  • Thumb: Keystone
  • Cuff: Slip-on
  • Lining: 3M Thinsulate
  • Construction: Cut-and-Sewn
  • Sizes: M-2XL
  • Packed: 6 Dozen/Case
Compare
Top Grain Goatskin

PIP®

Regular Grade Top Grain Goatskin Leather Drivers Glove - Keystone Thumb

71-3601

  • Hide: Top Grain Goatskin
  • Grade: Regular
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn
  • Sizes: S-XXXL
  • Packed: 10 Dozen/Case
Compare
Top Grain Cowhide

PIP®

Industry Grade Top Grain Cowhide Leather Drivers Glove - Keystone Thumb

68-160

  • Hide: Top Grain Cowhide
  • Grade: Industry
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn
  • Sizes: S-2XL
  • Packed: 10 Dozen/Case
Compare
Leather Drivers Gloves

Ironcat®

Premium Grade Split Cowhide Leather Drivers Glove - Keystone Thumb

9405

  • Hide: Split Cowhide
  • Grade: Premium
  • Thumb: Keystone
  • Cuff: Slip-on
  • Construction: Gunn Cut
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
Compare
Leather Drivers Gloves

Caiman®

Premium Top Grain Sheepskin Leather Drivers Glove - Keystone Thumb

1324

  • Hide: Top Grain Sheepskin
  • Grade: Premium
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Nylon
  • Lining: Unlined
  • Construction: Cut-and-Sewn, Reinforced Wear Points
  • Sizes: XS-XL
  • Packed: 120 Pair/Case
Compare
Top Grain Goatskin

PIP®

Economy Top Grain Goatskin Leather Drivers Glove with Natural Thermal Lining - Keystone Thumb

77-3600

  • Hide: Top Grain Goatskin
  • Grade: Economy
  • Thumb: Keystone
  • Cuff: Slip-on
  • Lining: Thermal
  • Construction: Cut-and-Sewn
  • Sizes: S-XL
  • Packed: 6 Dozen/Case
Compare
Leather Drivers Gloves

Caiman®

Genuine Elk Grain Leather Drivers Glove - Keystone Thumb

1306

  • Hide: Top Grain Elkskin
  • Grade: Regular
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Nylon
  • Lining: Unlined
  • Construction: Cut-and-Sewn, Reinforced Wear Points
  • Sizes: S-XL
  • Packed: 120 Pair/Case
Compare
Top Grain Cowhide

PIP®

Regular Grade Top Grain Leather Drivers Glove with Split Cowhide Back and Kevlar® Stitching - Keystone Thumb

68-163SB

  • Hide: Top Grain Cowhide
  • Grade: Regular
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Kevlar
  • Construction: Cut-and-Sewn
  • Sizes: S - XL
  • Packed: 10 Dozen/Case
Compare
Top Grain Cowhide

PIP®

Premium Grade Top Grain Cowhide Leather Drivers Glove with Reinforced Palm Patch - Keystone Thumb

984K

  • Hide: Top Grain Cowhide
  • Grade: Premium
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn, Reinforced Wear Points
  • Sizes: S-3XL
  • Packed: 10 Dozen/Case
 
ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
Top Grain Deerskin

PIP®

Premium Grade Top Grain Deerskin Leather Drivers Glove - Keystone Thumb

9920K

  • Hide: Top Grain Deerskin
  • Grade: Premium Industrial
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn, Gunn Cut
  • Sizes: XS-2XL
  • Packed: 10 Dozen/Case
 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
Top Grain Pigskin

PIP®

Industry Grade Top Grain Pigskin Leather Drivers Glove - Keystone Thumb

70-360

  • Hide: Top Grain Pigskin
  • Grade: Industry
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn
  • Sizes: S-XXXL
  • Packed: 10 Dozen/Case
Compare
Top Grain Cowhide

PIP®

Regular Grade Top Grain Cowhide Leather Drivers Glove with Hi-Vis Fingertips - Keystone Thumb

68-163HV

  • Hide: Top Grain Cowhide
  • Grade: Regular
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn, Hi-Vis Fingertips
  • Sizes: S-XXL
  • Packed: 10 Dozen/Case
Compare
Top Grain Pigskin

PIP®

Superior Grade Top Grain Pigskin Leather Drivers Glove - Keystone Thumb

70-368

  • Hide: Top Grain Pigskin
  • Grade: Superior
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Nylon
  • Construction: Cut-and-Sewn
  • Sizes: S - XL
  • Packed: 10 Dozen/Case
Compare
Top Grain Cowhide

PIP®

Regular Grade Top Grain Leather Drivers Glove with Brown Split Cowhide Back and Aramid Stitching - Keystone Thumb

1JL9066K

  • Hide: Top Grain Cowhide
  • Grade: Regular
  • Thumb: Keystone
  • Cuff: Slip-on
  • Stitching: Aramid
  • Construction: Cut-and-Sewn
  • Sizes: S-2XL
  • Packed: 72 Pair/Case
Compare
SHOWING 1-36 OF 47 ITEMS
1 of 2
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL