Products Brands Industries Resources About Us Value Proposition
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE ApronCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety Accessories
Emergency ResponderFR HoodsFire & Rescue GlovesFire & Rescue Goggle
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionEyewear AccessoriesFace ProtectionSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidEyewashFirst Aid Kit
Foot ProtectionOver-the-Shoe BootsOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical ResistantCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHi Performance GloveLeather DriversLeather Palm GlovesMetal Mesh GlovesParade GlovesProtection From ColdProtection From Heat
Head ProtectionBump CapsFR HoodsHard HatsHead Protect AccessoriesSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHi-Vis RainwearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionDisposable MasksReusable Facepieces
Warning BeaconsFlash Baton
Welding ProtectionFR ClothingHand ProtectionWelding Accessory
WorkwearWork Apparel

Cut Resistant Hand Protection

PIP® offers one of the widest ranges of coated seamless knit cut resistant gloves in the world, featuring leading brands like ATG®, G-Tek® and more. The use of cut resistant gloves has increased considerably over the years and we've led the charge with the introductions of innovative engineered yarn blends and grip technologies. Trust PIP® for every cut resistant glove need, no matter the spec, required feature, or budget.

HAND PROTECTION

Cut Resistant Gloves (41)

VIEW:
All
  • Description
  • Bullets
  • Icons
  • Hide All
SORT:
CLEAR ALL
Cut Level A8
Cut Level A7
Kevlar with Solid Nitrile Grip

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers

09-K1600

  • Cut Level: A7
  • Liner Material: Kevlar
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: XXS - XXXL
  • Packed: 6 Dozen/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

4X32FX
EN 388 2016 Results: 4X32FX
Abrasion: 4
Cut (Coupe Test): X
Tear: 3
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Leather Drivers

Boss®

Top Grain Goatskin Leather Drivers Glove with Kevlar® Blend Lining and Hi-Vis Impact Protection

9916

  • Cut Level: A7
  • Liner Material: Kevlar/ Polyester
  • Construction: Cut-and-Sewn, Reinforced Thumb Crotch
  • Country of Origin: Indonesia
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 1

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

3X44FP
EN 388 2016 Results: 3X44FP
Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 4
Cut (TDM-100 Test): F
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Silicone Grip with Polykor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Silicone Coated Flat Grip on Palm & Fingers

16-473

  • Cut Level: A7
  • Gauge: 13
  • Coating: Silicone
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 6
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
ANSI Contact Heat Level: 1
Test Method: ASTM F1060-18
Temperature: 176°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

4X42F
EN 388 2016 Results: 4X42F
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

X1XXXX
Protective Gloves Against Thermal Hazards: X1XXXX
Resistance to Flammability - X
Contact Heat Resistance - 1
Convective Heat Resistance - X
Radiant Heat Resistance - X
Resistance to Small Splashes of Molten Metal - X
Resistance to Large Splashes of Molten Metal - X

EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.

Compare
Nitrile Grip with PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers – Touchscreen Compatible

16-373

  • Cut Level: A7
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Elastic
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Country of Origin: China
  • Sizes: XS-XXL
  • Packed: 6 Dozen/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 5
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4X43FX
EN 388 2016 Results: 4X43FX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): F
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PosiGrip Max Grip with Polykor Fiber

G-Tek® Paradox™

Seamless Knit PolyKor® Blended Glove with PosiGrip MAX™ Coating on Palm & Fingers with Reinforced Thumb Crotch - 21 Gauge - Touchscreen Compatible

16-871

  • Cut Level: A7
  • Liner Material: PolyKor
  • Gauge: 21
  • Coating: PosiGrip Max
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch, Touchscreen Compatible
  • Country of Origin: China
  • Sizes: XXS-XXXL
  • Packed: 12 Dozen/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4X42F
EN 388 2016 Results: 4X42F
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Polyurethane Grip w/ PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers – Touchscreen Compatible

16-573

  • Cut Level: A7
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Elastic
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Country of Origin: China
  • Sizes: XS-XXL
  • Packed: 6 Dozen/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 6
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4X43FX
EN 388 2016 Results: 4X43FX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): F
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Neofoam Grip with PolyKor Fiber

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with NeoFoam® Coated Palm & Fingers - Touchscreen Compatible

16-377

  • Cut Level: A7
  • Liner Material: PolyKor X7
  • Gauge: 18
  • Coating: Neofoam
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Country of Origin: China
  • Sizes: S - XXL
  • Packed: 6 Dozen/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4X42F
EN 388 2016 Results: 4X42F
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Nitrile Foam Grip

Barracuda® Cut Force™

Hi-Vis Seamless Knit Polykor Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers

HVG710SNF

  • Cut Level: A8
  • Liner Material: PolyKor
  • Gauge: 10
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: S-2XL
  • Packed: 12 Dozen/Case
 
Cut Level: A8
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 5
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4543FX
EN 388 2016 Results: 4543FX
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 3
Cut (TDM-100 Test): F
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Nitrile Grip with PolyKor Fiber

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with Nitrile Coated MicroSurface Grip on Palm & Fingers - Touchscreen Compatible

16-278

  • Cut Level: A7
  • Liner Material: PolyKor X7
  • Gauge: 18
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Elastic
  • Construction: Seamless Knit, Touchscreen Compatible
  • Country of Origin: China
  • Sizes: XS-XXL
  • Packed: 6 Dozen/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4X42FX
EN 388 2016 Results: 4X42FX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Coated Seamless Knit

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with Impact Protection and NeoFoam® Coated Palm & Fingers

16-MP785

  • Cut Level: A7
  • Liner Material: PolyKor X7
  • Gauge: 18
  • Coating: Neofoam
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Country of Origin: China
  • Sizes: M-2XL
  • Packed: 36 Pair/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 1

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

4X42FP
EN 388 2016 Results: 4X42FP
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Nitrile Foam Grip

G-Tek® Paradox™

Seamless Knit PolyKor® Blended Glove with Foam Nitrile Coated Grip on Palm & Fingers with Reinforced Thumb Crotch - 21 Gauge - Touchscreen Compatible

16-371

  • Cut Level: A7
  • Liner Material: PolyKor
  • Gauge: 21
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Wear Points, Touchscreen Compatible
  • Country of Origin: China
  • Sizes: XXS-XXXL
  • Packed: 12 Dozen/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4X42F
EN 388 2016 Results: 4X42F
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Nitrile Foam Grip

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers - Touchscreen Compatible

16-378

  • Cut Level: A7
  • Liner Material: PolyKor X7
  • Gauge: 18
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Elastic
  • Construction: Seamless Knit, Touchscreen Compatible
  • Country of Origin: China
  • Sizes: XS-XXL
  • Packed: 6 Dozen/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 5
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4X42FX
EN 388 2016 Results: 4X42FX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Antimicrobial Glove - Light Weight

G13CC/8YL

  • Cut Level: A8
  • Liner Material: Antimicrobial/ HPPE/ Lycra/ Stainless Steel Wire
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Antimicrobial, Low-Lint, Machine Knit, Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-3XL
  • Packed: 204/Case
 
Cut Level: A8
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Antimicrobial Glove - Light Weight

G13CC/8PL

  • Cut Level: A8
  • Liner Material: Antimicrobial/ HPPE/ Lycra/ Stainless Steel Wire
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Antimicrobial, Low-Lint, Machine Knit, Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-3XL
  • Packed: 204/Case
 
Cut Level: A8
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended with Sta-COOL® Plating Glove - Medium Weight

10-C5GYCMX

  • Cut Level: A7
  • Liner Material: HPPE/ Stainless Steel Wire/ Sta-Cool
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-2XL
  • Packed: 204/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Antimicrobial Glove - Light Weight

G13CC/8BK

  • Cut Level: A8
  • Liner Material: Antimicrobial/ HPPE/ Lycra/ Stainless Steel Wire
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Antimicrobial, Low-Lint, Machine Knit, Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-3XL
  • Packed: 204/Case
 
Cut Level: A8
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Antimicrobial Glove - Light Weight

G13CC/8BL

  • Cut Level: A8
  • Liner Material: Antimicrobial/ HPPE/ Lycra/ Stainless Steel Wire
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Antimicrobial, Low-Lint, Machine Knit, Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-3XL
  • Packed: 204/Case
 
Cut Level: A8
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Antimicrobial Glove - Light Weight

G13CC/8BR

  • Cut Level: A8
  • Liner Material: Antimicrobial/ HPPE/ Lycra/ Stainless Steel Wire
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Antimicrobial, Low-Lint, Machine Knit, Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-3XL
  • Packed: 204/Case
 
Cut Level: A8
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Antimicrobial Glove - Light Weight

G13CC/8OR

  • Cut Level: A8
  • Liner Material: Antimicrobial/ HPPE/ Lycra/ Stainless Steel Wire
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Antimicrobial, Low-Lint, Machine Knit, Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-3XL
  • Packed: 204/Case
 
Cut Level: A8
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Glove - Light Weight

13-231

  • Cut Level: A7
  • Liner Material: HPPE/ Stainless Steel Wire
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-XL
  • Packed: 204/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Antimicrobial Glove - Light Weight

G13CC/8GY

  • Cut Level: A8
  • Liner Material: Antimicrobial/ HPPE/ Lycra/ Stainless Steel Wire
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Antimicrobial, Low-Lint, Machine Knit, Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-3XL
  • Packed: 204/Case
 
Cut Level: A8
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit PolyKor® Blended Glove - Heavy Weight

22-650

  • Cut Level: A7
  • Liner Material: PolyKor
  • Gauge: 7
  • Weight: Heavy Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: XS - XL
  • Packed: 24/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Antimicrobial Glove - Light Weight

G13CC/8GR

  • Cut Level: A8
  • Liner Material: Antimicrobial/ HPPE/ Lycra/ Stainless Steel Wire
  • Gauge: 13
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Antimicrobial, Low-Lint, Machine Knit, Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-3XL
  • Packed: 204/Case
 
Cut Level: A8
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended with Sta-COOL® Plating Glove - Medium Weight

10-C5HVOCMX

  • Cut Level: A7
  • Liner Material: HPPE/ Stainless Steel Wire/ Sta-Cool
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-3XL
  • Packed: 204/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
ATA Hide-Away

Kut Gard®

Seamless Knit ATA® Hide-Away™ / Aramid Blended Glove with Cotton/Polyester Plating - Heavy Weight

MATA501HA

  • Cut Level: A7
  • Liner Material: Aramid/ Cotton/ Stainless Steel Wire
  • Gauge: 7
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Machine Knit, Seamless Knit
  • Country of Origin: United States
  • Sizes: S-2XL
  • Packed: 6 Dozen/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit Dyneema® Blended Antimicrobial Glove - Medium Weight

22-760G

  • Cut Level: A7
  • Liner Material: Antimicrobial/ Dyneema
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: XS - XL
  • Packed: 24/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Glove - Light Weight

13-131

  • Cut Level: A7
  • Liner Material: HPPE/ Stainless Steel Wire
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-2XL
  • Packed: 204/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit Dyneema® Blended Antimicrobial Glove - Medium Weight

22-760OR

  • Cut Level: A7
  • Liner Material: Antimicrobial/ Dyneema
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-XXL
  • Packed: 24/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Glove - Medium Weight

10-C6GY

  • Cut Level: A8
  • Liner Material: HPPE/ Stainless Steel Wire
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-2XL
  • Packed: 24/Case
 
Cut Level: A8
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit Dyneema® Blended Antimicrobial Glove - Medium Weight

22-760

  • Cut Level: A7
  • Liner Material: Antimicrobial/ Dyneema
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: XS - XL
  • Packed: 24/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit Dyneema® Blended Antimicrobial Glove - Medium Weight

22-760BB

  • Cut Level: A7
  • Liner Material: Antimicrobial/ Dyneema
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-XL
  • Packed: 24/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Glove - Medium Weight

10-131

  • Cut Level: A8
  • Liner Material: HPPE/ Stainless Steel Wire
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-2XL
  • Packed: 24/Case
 
Cut Level: A8
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit Dyneema® Blended Antimicrobial Glove - Medium Weight

22-900

  • Cut Level: A7
  • Liner Material: Antimicrobial/ Dyneema
  • Gauge: 7
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: XS - XL
  • Packed: 24/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Glove - Medium Weight

10-C6GYEC

  • Cut Level: A7
  • Liner Material: HPPE/ Stainless Steel Wire
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-XL
  • Packed: 204/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit Dyneema® Blended Antimicrobial Glove - Medium Weight

22-760GRN

  • Cut Level: A7
  • Liner Material: Antimicrobial/ Dyneema
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-XL
  • Packed: 24/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Glove - Medium Weight

10-C6WHEC

  • Cut Level: A8
  • Liner Material: HPPE/ Stainless Steel Wire
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-XL
  • Packed: 204/Case
 
Cut Level: A8
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
SHOWING 1-36 OF 41 ITEMS
1 of 2
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL