Products Brands Industries Resources About Us Value Proposition
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety Accessories
Emergency ResponderAccessories FR HoodsFire & Rescue GlovesFire & Rescue Goggle
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionFace ProtectionSafety Eyewear AccessoriesSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidAccessoriesFirst Aid Kit
Foot ProtectionOver-the-ShoeOver-the-Shoe BootsOver-the-SockOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical Resistant GlovesCold Protection GlovesCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHeat Protection GlovesHigh Performance GlovesLeather Drivers GlovesLeather Palm GlovesMetal Mesh GlovesParade & Uniform Gloves
Head ProtectionAccessoriesBump CapsFR HoodsHard HatsSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionDisposable MasksReusable Facepieces
Warning BeaconsFlash Baton
Welding ProtectionAccessoriesFR ClothingHand ProtectionHead Protection
WorkwearWork Apparel

Enhanced grip and performance

PIP is constantly bringing new innovations to our general purpose glove line. With a variety of superior coating and grip technologies, combined with comfortable liner materials, these products improve performance without sacrificing dexterity and comfort.

SHOWING 1-9 OF 9 ITEMS
1 of 1
FILTERS:
CLEAR ALL
MicroSurface Grip
Latex MicroFinish Grip

G-Tek®

Seamless Knit Polyester Glove with Double Dipped Latex MicroSurface Grip - Waterproof

55-1600

  • Liner Material: Polyester
  • Gauge: 13
  • Coating: Latex
  • Coating Coverage: Full Hand
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Waterproof
  • Sizes: S-XXL
  • Packed: 6 Dozen/Case

2131

EN 388 2016 Results: 2131XX
Abrasion: 2
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Nitrile Grip

Boss®

Seamless Knit Nylon Glove with Premium Nitrile Coated MicroSurface Grip on Palm & Fingers - 15 Gauge

1UH7830

  • Liner Material: Nylon
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-3XL
  • Packed: 144 Pair/Case

4131

EN 388 2016 Results: 4131XX
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Nitrile Grip

G-Tek®

Seamless Knit Nylon Glove with Nitrile Coated MicroSurface Grip on Palm & Fingers

34-500

  • Liner Material: Nylon
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: 2XS-2XL
  • Packed: 12 Dozen/Case

4121

EN 388 2016 Results: 4121XX
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-2
ANSI Abrasion Level: 2
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Polyester with Nitrile Grip

PIP®

Seamless Knit Polyester Glove with Nitrile Coated MicroSurface Grip on Palm & Fingers

34-300

  • Liner Material: Polyester
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 12 Dozen/Case

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Polyester with Nitrile Grip

Boss®

Seamless Knit Polyester Glove with Double-Dipped Nitrile Coated MicroSurface Grip on Palm & Fingers

1UH7820

  • Liner Material: Polyester
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-3XL
  • Packed: 144 Pair/Case

4121

EN 388 2016 Results: 4121XX
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Nitrile Grip

G-Tek®

Seamless Knit Nylon Glove with Nitrile Coated MicroSurface Grip on Palm & Fingers - 18 Gauge

34-400

  • Liner Material: Nylon
  • Gauge: 18
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 12 Dozen/Case

4111

EN 388 2016 Results: 4111X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 1
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-1
ANSI Abrasion Level: 1
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
ECO Series GP Sustainable Fiber Gloves

G-Tek® ECO Series™

Seamless Knit Recycled Yarn / Spandex Blended Glove with Nitrile Coated MicroSurface Grip on Palm & Fingers

31-530R

  • Liner Material: Recycled Plastic
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 10 Dozen/Case

4121

EN 388 2016 Results: 4121XX
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Made from Recycled Materials

PIP® has taken our innovative platform to the next level, we use recycled P.E.T. water bottles – shredded and extruded as a fiber creating a comfortable and cool material as well as recycled polyester yarns used to create yarns for gloves and apparel.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Latex MicroFinish Grip

G-Tek®

Hi-Vis Seamless Knit Polyester Glove with Latex Coated MicroSurface Grip on Palm & Fingers

55-AG317

  • Liner Material: Polyester
  • Gauge: 13
  • Coating: Latex
  • Coating Coverage: Palm & Fingers
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS - 2XL
  • Packed: 12 Dozen/Case

2121

EN 388 2016 Results: 2121X
Abrasion: 2
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Nylon with Nitrile Grip

G-Tek®

Seamless Knit Nylon Glove with Nitrile Coated MicroSurface Grip on Palm & Fingers - Vend-Ready

34-500V

  • Liner Material: Nylon
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS - XXL
  • Packed: 144 Pair/Case

4121

EN 388 2016 Results: 4121XX
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-2
ANSI Abrasion Level: 2
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
SHOWING 1-9 OF 9 ITEMS
1 of 1
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL