Products Brands Industries Resources About Us Value Proposition
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE ApronCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety Accessories
Emergency ResponderFR HoodsFire & Rescue GlovesFire & Rescue Goggle
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionEyewear AccessoriesFace ProtectionSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidEyewashFirst Aid Kit
Foot ProtectionOver-the-Shoe BootsOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical ResistantCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHi Performance GloveLeather DriversLeather Palm GlovesMetal Mesh GlovesParade GlovesProtection From ColdProtection From Heat
Head ProtectionBump CapsFR HoodsHard HatsHead Protect AccessoriesSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHi-Vis RainwearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionDisposable MasksReusable Facepieces
Warning BeaconsFlash Baton
Welding ProtectionFR ClothingHand ProtectionWelding Accessory
WorkwearWork Apparel

The Assurance You Need

Our extensive line of chemical and liquid resistant gloves have been designed with the utmost safety in mind. Resistance and permeation test results are available for a wide variety of chemical families found commonly in the workplace. While these results are generated in a laboratory setting and we are highly confident of the ability to perform well at work, we recommend that you should also conduct your own testing to make certain that the gloves are compatible with your application.

HAND PROTECTION

Chemical Resistant Gloves (32)

VIEW:
All
  • Description
  • Bullets
  • Icons
  • Hide All
SORT:
CLEAR ALL
Country of Origin: Bangladesh
Country of Origin: Malaysia
Medium & Heavy Weight Nitrile

Assurance®

Unsupported Nitrile, Flock Lined with Raised Diamond Grip - 15 Mil

50-N160G

  • Polymer: Nitrile
  • Thickness: 15 Mil
  • Lining: Flocked
  • Length: 13"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: XS - XXL
  • Packed: 12 Dozen/Case
4101XX
EN 388 2016 Results: 4101XX
Abrasion: 4
Cut (Coupe Test): 1
Tear: 0
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

AJKLMNOPT
EN 374 Results: AJKLMNOPT
Type: A
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
N: Acetic Acid 99%
O: Ammonium Hydroxide 25%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

Compare
Medium & Heavy Weight Nitrile

Assurance®

Unsupported Nitrile, Unlined with Sandpatch Grip - 22 Mil

50-N2272G

  • Polymer: Nitrile
  • Thickness: 22 Mil
  • Lining: Unlined
  • Length: 18"
  • Cuff: Straight
  • Grip: Sandpatch
  • Construction: Unsupported
  • Sizes: M - XXL
  • Packed: 1 Dozen/Case
4102X
EN 388 2016 Results: 4102X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 0
Puncture: 2
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

AJK
EN 374 Results: AJK
Type: B
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

Compare
Unsupported Neoprene Over Latex

Assurance®

Unsupported Neoprene/Latex, Flock Lined with Raised Diamond Grip - 28 Mil

52-3670

  • Polymer: Neoprene over Latex
  • Thickness: 28 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S - XXXL
  • Packed: 12 Dozen/Case
4121X
EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

AKL
EN 374 Results: AKL
Type: B
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

Compare
Neoprene

Assurance®

Unsupported Neoprene, Flock Lined with Raised Diamond Grip - 28 Mil

52-3665

  • Polymer: Neoprene
  • Thickness: 28 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S - XL
  • Packed: 12 Dozen/Case
3121X
EN 388 2016 Results: 3121X
Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

AKL
EN 374 Results: AKL
Type: B
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

Compare
Unsupported Neoprene Over Latex

Assurance®

Unsupported Neoprene/Latex, Flock Lined with Raised Diamond Grip - 19 Mil

52-3672

  • Polymer: Neoprene over Latex
  • Thickness: 19 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S - XL
  • Packed: 12 Dozen/Case
2011XX
EN 388 2016 Results: 2011XX
Abrasion: 2
Cut (Coupe Test): 0
Tear: 1
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

KPT
EN 374 Results: KPT
Type: B
K: Sodium Hydroxide 40%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

Compare
Industrial Flock Lined

Assurance®

Unsupported Latex, Industrial Flock Lined with Raised Diamond Grip - 28 Mil

48-L300K

  • Polymer: Latex
  • Thickness: 28 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: M - XXL
  • Packed: 12 Dozen/Case
2121XX
EN 388 2016 Results: 2121XX
Abrasion: 2
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

AJKLNPT
EN 374 Results: AJKLNPT
Type: A
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
N: Acetic Acid 99%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

Compare
Nitrile Coated with MicroFinish Grip

ActivGrip™

Nitrile Coated Glove with Cotton Liner and MicroFinish Grip - 12"

56-AG566

  • Polymer: Nitrile
  • Lining: Interlock
  • Length: 12"
  • Cuff: Straight
  • Grip: MicroFinish
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: S - XL
  • Packed: 6 Dozen/Case
4121X
EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Dipped with Smooth Finish

PIP®

PVC Dipped Glove with Interlock Liner and Smooth Finish - 12" Length

1027

  • Polymer: PVC
  • Lining: Interlock
  • Length: 12"
  • Cuff: Straight
  • Grip: Smooth
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
Household Flock Lined

Assurance®

Unsupported Latex, Flock Lined with Raised Diamond Grip - 16 Mil

48-L160Y

  • Polymer: Latex
  • Thickness: 16 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S - XL
  • Packed: 12 Dozen/Case
2000XX
EN 388 2016 Results: 2000XX
Abrasion: 2
Cut (Coupe Test): 0
Tear: 0
Puncture: 0
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

KPT
EN 374 Results: KPT
Type: B
K: Sodium Hydroxide 40%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

Compare
PVC Dipped with Smooth Finish

PIP®

PVC Dipped Glove with Interlock Liner and Smooth Finish - Knit Wrist

1007

  • Polymer: PVC
  • Lining: Interlock
  • Length: 10"
  • Cuff: Knit Wrist
  • Grip: Smooth
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Coated Seamless Knit
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
Household Flock Lined

Assurance®

Unsupported Latex, Flock Lined with Raised Diamond Grip - 16 Mil

48-L162Y

  • Polymer: Latex
  • Thickness: 16 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Pinked
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S - XL
  • Packed: 12 Dozen/Case
2000XX
EN 388 2016 Results: 2000XX
Abrasion: 2
Cut (Coupe Test): 0
Tear: 0
Puncture: 0
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

KPT
EN 374 Results: KPT
Type: B
K: Sodium Hydroxide 40%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

Compare
Nitrile Coated with MicroFinish Grip

ActivGrip™

Nitrile Coated Glove with Cotton Liner and MicroFinish Grip - Safety Cuff

56-AG588

  • Polymer: Nitrile
  • Lining: Interlock
  • Length: 10"
  • Cuff: Safety
  • Grip: MicroFinish
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: S-XXL
  • Packed: 6 Dozen/Case
4121X
EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Dipped with Smooth Finish

PIP®

PVC Dipped Glove with Interlock Liner and Smooth Finish - 14" Length

1047

  • Polymer: PVC
  • Lining: Interlock
  • Length: 14"
  • Cuff: Straight
  • Grip: Smooth
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
Nitrile Coated with MicroFinish Grip

ActivGrip™

Nitrile Coated Glove with Cotton Liner and MicroFinish Grip - 12"

56-AG586

  • Polymer: Nitrile
  • Lining: Interlock
  • Length: 12"
  • Cuff: Straight
  • Grip: MicroFinish
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: XS-XL
  • Packed: 6 Dozen/Case
4121X
EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Dipped with Semi-Rough Finish

PIP®

PVC Dipped Glove with Interlock Liner and Semi-Rough Finish - 12" Length

1027R

  • Polymer: PVC
  • Lining: Interlock
  • Length: 12"
  • Cuff: Straight
  • Grip: Semi-Rough
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Rough Finish

PIP®

PVC Dipped Glove with Interlock Liner and Rough Sandy Finish - 18" Length

1087RF

  • Polymer: PVC
  • Lining: Interlock
  • Length: 18"
  • Cuff: Straight
  • Grip: Rough
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Smooth Finish

PIP®

PVC Dipped Glove with Interlock Liner and Smooth Finish - 18" Length

1087

  • Polymer: PVC
  • Lining: Interlock
  • Length: 18"
  • Cuff: Straight
  • Grip: Smooth
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
Nitrile Coated with MicroFinish Grip

ActivGrip™

Nitrile Coated Glove with Cotton Liner and MicroFinish Grip - 10"

56-AG585

  • Polymer: Nitrile
  • Lining: Interlock
  • Length: 10"
  • Cuff: Straight
  • Grip: MicroFinish
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: XS - XXL
  • Packed: 6 Dozen/Case
4121X
EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Dipped with Rough Finish

PIP®

PVC Dipped Glove with Jersey Liner and Rough Sandy Finish - 14" Length

J1047RF

  • Polymer: PVC
  • Lining: Jersey
  • Length: 14"
  • Cuff: Straight
  • Grip: Rough
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
4111
EN 388 2016 Results: 4111
Abrasion: 4
Cut (Coupe Test): 1
Tear: 1
Puncture: 1
Cut (TDM-100 Test):
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Dipped with Smooth Finish

PIP®

PVC Dipped Glove with Interlock Liner and Smooth Finish - 10" Length

1017

  • Polymer: PVC
  • Lining: Interlock
  • Length: 10"
  • Cuff: Straight
  • Grip: Smooth
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Rough Finish

PIP®

PVC Dipped Glove with Jersey Liner and Rough Sandy Finish - 12" Length

J1027RF

  • Polymer: PVC
  • Lining: Jersey
  • Length: 12"
  • Cuff: Straight
  • Grip: Rough
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Rough Finish

PIP®

PVC Dipped Glove with Interlock Liner and Rough Sandy Finish - 12" Length

1027RF

  • Polymer: PVC
  • Lining: Interlock
  • Length: 12"
  • Cuff: Straight
  • Grip: Rough
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Semi-Rough Finish

PIP®

PVC Dipped Glove with Interlock Liner and Semi-Rough Finish - 14" Length

1047R

  • Polymer: PVC
  • Lining: Interlock
  • Length: 14"
  • Cuff: Straight
  • Grip: Semi-Rough
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Smooth Finish

PIP®

PVC Dipped Glove with Jersey Liner and Smooth Finish - 12" Length

J1027

  • Polymer: PVC
  • Lining: Jersey
  • Length: 12"
  • Cuff: Straight
  • Grip: Smooth
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Rough Finish

PIP®

PVC Dipped Glove with Interlock Liner and Rough Sandy Finish - 14" Length

1047RF

  • Polymer: PVC
  • Lining: Interlock
  • Length: 14"
  • Cuff: Straight
  • Grip: Rough
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Semi-Rough Finish

PIP®

PVC Dipped Glove with Interlock Liner and Semi-Rough Finish - Knit Wrist

1007R

  • Polymer: PVC
  • Lining: Interlock
  • Length: 10"
  • Cuff: Knit Wrist
  • Grip: Semi-Rough
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Cut-and-Sewn
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Rough Finish

PIP®

PVC Dipped Glove with Interlock Liner and Rough Sandy Finish - Knit Wrist

1007RF

  • Polymer: PVC
  • Lining: Interlock
  • Length: 10"
  • Cuff: Knit Wrist
  • Grip: Rough
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Cut-and-Sewn
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Rough Finish

PIP®

PVC Dipped Glove with Jersey Liner and Rough Sandy Finish - 18" Length

J1087RF

  • Polymer: PVC
  • Lining: Jersey
  • Length: 18"
  • Cuff: Straight
  • Grip: Rough
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
4111
EN 388 2016 Results: 4111
Abrasion: 4
Cut (Coupe Test): 1
Tear: 1
Puncture: 1
Cut (TDM-100 Test):
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Dipped with Semi-Rough Finish

PIP®

PVC Dipped Glove with Interlock Liner and Semi-Rough Finish - 10" Length

1017R

  • Polymer: PVC
  • Lining: Interlock
  • Length: 10"
  • Cuff: Straight
  • Grip: Semi-Rough
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Rough Finish

PIP®

PVC Dipped Glove with Interlock Liner and Rough Sandy Finish - 10" Length

1017RF

  • Polymer: PVC
  • Lining: Interlock
  • Length: 10"
  • Cuff: Straight
  • Grip: Rough
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Rough Finish

PIP®

PVC Dipped Glove with Jersey Liner and Rough Sandy Finish - Knit Wrist

J1007RF

  • Polymer: PVC
  • Lining: Jersey
  • Length: 10"
  • Cuff: Knit Wrist
  • Grip: Sandy
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Cut-and-Sewn
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Rough Finish

PIP®

PVC Dipped Glove with Jersey Liner and Rough Sandy Finish - 10" Length

J1017RF

  • Polymer: PVC
  • Lining: Jersey
  • Length: 10"
  • Cuff: Straight
  • Grip: Rough
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
4111
EN 388 2016 Results: 4111
Abrasion: 4
Cut (Coupe Test): 1
Tear: 1
Puncture: 1
Cut (TDM-100 Test):
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare

Assurance®

Unsupported Nitrile, Flock Lined with Sandpatch Grip - 15 Mil

52-AS25G-AP

  • Polymer: Nitrile
  • Thickness: 15"
  • Lining: Flocked
  • Length:
  • Cuff: Straight
  • Grip: Sandpatch
  • Construction: Unsupported
  • Sizes: S-2XL
  • Packed: 144 Pair/Case
4101XX
EN 388 2016 Results: 4101XX
Abrasion: 4
Cut (Coupe Test): 1
Tear: 0
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
SHOWING 1-32 OF 32 ITEMS
1 of 1
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL