Products Brands Industries Resources About Us Value Proposition
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety Accessories
Emergency ResponderAccessories FR HoodsFire & Rescue GlovesFire & Rescue Goggle
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionFace ProtectionSafety Eyewear AccessoriesSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidAccessoriesFirst Aid Kit
Foot ProtectionOver-the-ShoeOver-the-Shoe BootsOver-the-SockOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical Resistant GlovesCold Protection GlovesCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHeat Protection GlovesHigh Performance GlovesLeather Drivers GlovesLeather Palm GlovesMetal Mesh GlovesParade & Uniform Gloves
Head ProtectionAccessoriesBump CapsFR HoodsHard HatsSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionDisposable MasksReusable Facepieces
Warning BeaconsFlash Baton
Welding ProtectionAccessoriesFR ClothingHand ProtectionHead Protection
WorkwearWork Apparel

The Assurance You Need

Our Assurance®, Ambidex® and ProCoat® lines of chemical and liquid resistant gloves have been designed with the utmost safety in mind. Resistance and permeation test results are available for a wide variety of chemical families found commonly in the workplace. While these results are generated in a laboratory setting and we are highly confident of the ability to perform well at work, we recommend that you should also conduct your own testing to make certain that the gloves are compatible with your application.

SHOWING 1-36 OF 50 ITEMS
1 of 2
FILTERS:
CLEAR ALL
PVC
Specialty PVC Blends on Seamless Liners

XtraTuff™

Cold Resistant PVC Glove with Detachable Acrylic Liner and Sandy Coating - Insulated & Waterproof

58-8658DL

  • Polymer: PVC
  • Lining: Acrylic
  • Length: 12"
  • Cuff: Straight
  • Grip: Rough
  • Coating Coverage: Full Hand
  • Liner Material: Interlock/ Terry Cloth
  • Construction: Seamless Knit, Supported
  • Sizes: L - XXL
  • Packed: 6 Dozen/Case

AJK

EN 374 Results: AJK
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Specialty PVC Blends on Seamless Liners BEST SELLER

XtraTuff™

Oil Resistant PVC Glove with Seamless Liner and Rough Coating - 12"

58-8656

  • Polymer: PVC
  • Lining: Interlock
  • Length: 12"
  • Cuff: Straight
  • Grip: Rough
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: S - XXL
  • Packed: 6 Dozen/Case

AJKL

EN 374 Results: AJKL
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Specialty PVC Blends on Seamless Liners

XtraTuff™

Oil Resistant PVC Glove with DuPont™ Kevlar® Liner and Rough Grip

58-8658K

  • Polymer: PVC
  • Length: 12"
  • Cuff: Open
  • Grip: Rough
  • Coating Coverage: Full Hand
  • Liner Material: Kevlar
  • Construction: Seamless Knit
  • Sizes: M-XL
  • Packed: 6 Dozen/Case

AJK

EN 374 Results: AJK
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

ansi-A3
ANSI Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42C

EN 388 2016 Results: 4X42C
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
Specialty PVC Blends on Seamless Liners

PermFlex®

Cold Resistant PVC Glove with Seamless Liner and Rough Coating - 10"

58-8650

  • Polymer: PVC
  • Lining: Interlock
  • Length: 10"
  • Cuff: Straight
  • Grip: Rough
  • Coating Coverage: Full Hand
  • Construction: Supported
  • Sizes: S - XL
  • Packed: 6 Dozen/Case

3121

EN 388 2016 Results: 3121X
Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Dipped with Smooth Finish

PIP®

PVC Dipped Glove with Interlock Liner and Smooth Finish - 12" Length

1027

  • Polymer: PVC
  • Lining: Interlock
  • Length: 12"
  • Cuff: Straight
  • Grip: Smooth
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Sandy Finish

Air Krush™

PVC Dipped Glove with Interlock Liner, Impact Protection and Rough Finish - 14"

HVO1015

  • Polymer: PVC
  • Lining: Interlock
  • Length: 14"
  • Cuff: Straight
  • Grip: Rough
  • Coating Coverage: Full Hand
  • Construction: Supported
  • Sizes: L-2XL
  • Packed: 6 Dozen/Case

4131

EN 388 2016 Results: 4131
Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Dipped with Smooth Finish

PIP®

PVC Dipped Glove with Interlock Liner and Smooth Finish - 18" Length

1087

  • Polymer: PVC
  • Lining: Interlock
  • Length: 18"
  • Cuff: Straight
  • Grip: Smooth
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Smooth Finish

PIP®

PVC Dipped Glove with Interlock Liner and Smooth Finish - Knit Wrist

1007

  • Polymer: PVC
  • Lining: Interlock
  • Length: 10"
  • Cuff: Knit Wrist
  • Grip: Smooth
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Coated Seamless Knit
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Smooth Finish

PIP®

PVC Dipped Glove with Interlock Liner and Smooth Finish - 14" Length

1047

  • Polymer: PVC
  • Lining: Interlock
  • Length: 14"
  • Cuff: Straight
  • Grip: Smooth
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Rough Acid Finish Grip

ProCoat®

Premium PVC Dipped Glove with Jersey Liner and Rough Acid Finish - 14" Length

58-8040DD

  • Polymer: PVC
  • Lining: Jersey
  • Length: 14"
  • Cuff: Straight
  • Grip: Rough Acid
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case

JKL

EN 374 Results: JKL
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Dipped with Rough Finish

PIP®

PVC Dipped Glove with Interlock Liner and Rough Sandy Finish - 18" Length

1087RF

  • Polymer: PVC
  • Lining: Interlock
  • Length: 18"
  • Cuff: Straight
  • Grip: Rough
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
Specialty PVC Blends on Seamless Liners

XtraTuff™

Oil Resistant PVC Glove with Seamless Liner and Rough Coating - 10"

58-8655

  • Polymer: PVC
  • Lining: String Knit
  • Length: 10"
  • Cuff: Gauntlet
  • Grip: Rough
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Seamless Knit
  • Sizes: S - XL
  • Packed: 6 Dozen/Case

AJKL

EN 374 Results: AJKL
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Dipped with Smooth Finish

ProCoat®

Premium PVC Dipped Glove with Interlock Liner and Smooth Finish - 12" Length

58-8030

  • Polymer: PVC
  • Lining: Interlock
  • Length: 12"
  • Cuff: Straight
  • Grip: Smooth
  • Dip: Single
  • Coating Coverage: Full Hand
  • Construction: Supported
  • Sizes: Men's
  • Packed: 10 Dozen/Case

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Dipped with Smooth Finish

ProCoat®

Premium PVC Dipped Glove with Interlock Liner and Smooth Finish - 18" Length

58-8060

  • Polymer: PVC
  • Lining: Interlock
  • Length: 18"
  • Cuff: Straight
  • Grip: Smooth
  • Dip: Single
  • Coating Coverage: Full Hand
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Dipped with Rough Finish

PIP®

PVC Dipped Glove with Interlock Liner and Rough Sandy Finish - 12" Length

1027RF

  • Polymer: PVC
  • Lining: Interlock
  • Length: 12"
  • Cuff: Straight
  • Grip: Rough
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Smooth Finish

ProCoat®

Premium PVC Dipped Glove with Interlock Liner and Smooth Finish - 14" Length

58-8040

  • Polymer: PVC
  • Lining: Interlock
  • Length: 14"
  • Cuff: Straight
  • Grip: Smooth
  • Dip: Single
  • Coating Coverage: Full Hand
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Dipped with Rough Finish

PIP®

PVC Dipped Glove with Jersey Liner and Rough Sandy Finish - 14" Length

J1047RF

  • Polymer: PVC
  • Lining: Jersey
  • Length: 14"
  • Cuff: Straight
  • Grip: Rough
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case

4111

EN 388 2016 Results: 4111
Abrasion: 4
Cut (Coupe Test): 1
Tear: 1
Puncture: 1
Cut (TDM-100 Test):
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Dipped with Smooth Finish

PIP®

PVC Dipped Glove with Interlock Liner and Smooth Finish - 10" Length

1017

  • Polymer: PVC
  • Lining: Interlock
  • Length: 10"
  • Cuff: Straight
  • Grip: Smooth
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Sandy Finish

ProCoat®

Premium PVC Dipped Glove with Interlock Liner and Rough Sandy Finish - 14" Length

58-8140DD

  • Polymer: PVC
  • Lining: Interlock
  • Length: 14"
  • Cuff: Straight
  • Grip: Sandy
  • Dip: Double
  • Coating Coverage: Full Hand
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case

JKL

EN 374 Results: JKL
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Dipped with Semi-Rough Finish

PIP®

PVC Dipped Glove with Interlock Liner and Semi-Rough Finish - 12" Length

1027R

  • Polymer: PVC
  • Lining: Interlock
  • Length: 12"
  • Cuff: Straight
  • Grip: Semi-Rough
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Sandy Finish

Boss®

PVC Dipped Glove with Jersey Liner and Sandy Finish - 12" Length

1SP5712Y

  • Polymer: PVC
  • Lining: Jersey
  • Length: 12"
  • Cuff: Gauntlet
  • Grip: Sandy
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: Large
  • Packed: 72 Pair/Case
Compare
PVC Dipped with Rough Acid Finish Grip

ProCoat®

Premium PVC Dipped Glove with Jersey Liner and Rough Acid Finish - 12" Length

58-8025DD

  • Polymer: PVC
  • Lining: Jersey
  • Length: 12"
  • Cuff: Straight
  • Grip: Rough Acid
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case

JKL

EN 374 Results: JKL
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Dipped with Semi-Rough Finish

PIP®

PVC Dipped Glove with Interlock Liner and Semi-Rough Finish - 14" Length

1047R

  • Polymer: PVC
  • Lining: Interlock
  • Length: 14"
  • Cuff: Straight
  • Grip: Semi-Rough
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Semi-Rough Finish

ProCoat®

Premium PVC Dipped Glove with Interlock Liner and Semi-Rough Finish - 14" Length

58-8040R

  • Polymer: PVC
  • Lining: Interlock
  • Length: 14"
  • Cuff: Straight
  • Grip: Semi-Rough
  • Dip: Single
  • Coating Coverage: Full Hand
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Dipped with Sandy Finish

ProCoat®

Premium PVC Dipped Glove with Jersey Liner and Rough Sandy Finish - 12" Length

58-8230DD

  • Polymer: PVC
  • Lining: Jersey
  • Length: 12"
  • Cuff: Straight
  • Grip: Sandy
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case

JKL

EN 374 Results: JKL
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

Compare
PVC Dipped with Rough Finish

PIP®

PVC Dipped Glove with Interlock Liner and Rough Sandy Finish - 14" Length

1047RF

  • Polymer: PVC
  • Lining: Interlock
  • Length: 14"
  • Cuff: Straight
  • Grip: Rough
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Smooth Finish

ProCoat®

Premium PVC Dipped Glove with Interlock Liner and Smooth Finish - Knit Wrist

58-8015

  • Polymer: PVC
  • Lining: Interlock
  • Length: 10"
  • Cuff: Knit Wrist
  • Grip: Smooth
  • Coating Coverage: Full Hand
  • Construction: Coated Seamless Knit
  • Sizes: Men's
  • Packed: 10 Dozen/Case

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Dipped with Rough Acid Finish Grip

ProCoat®

Premium PVC Dipped Glove with Jersey Liner and Rough Acid Finish - 14" Length

58-8035DD

  • Polymer: PVC
  • Lining: Jersey
  • Length: 14"
  • Cuff: Straight
  • Grip: Rough Acid
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case

JKL

EN 374 Results: JKL
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Dipped with Rough Acid Finish Grip

XtraTuff™

Oil Resistant PVC Glove with Seamless Liner and Rough Coating - 25" Extended PVC Sleeve

58-8657

  • Polymer: PVC
  • Cuff: Straight
  • Grip: Rough
  • Construction: Supported
  • Sizes: S-XL
  • Packed: 6 Dozen/Case

3121

EN 388 2016 Results: 3121X
Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Dipped with Sandy Finish

ProCoat®

Premium PVC Dipped Glove with Interlock Liner and Rough Sandy Finish - 12" Length

58-8130DD

  • Polymer: PVC
  • Lining: Interlock
  • Length: 12"
  • Cuff: Straight
  • Grip: Sandy
  • Dip: Double
  • Coating Coverage: Full Hand
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case

JKL

EN 374 Results: JKL
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Specialty PVC Blends on Seamless Liners

PermFlex®

Cold Resistant PVC Glove with Seamless Liner and Rough Coating - 12"

58-8651

  • Polymer: PVC
  • Lining: Interlock
  • Length: 12"
  • Cuff: Straight
  • Grip: Rough
  • Coating Coverage: Full Hand
  • Construction: Supported
  • Sizes: S - XL
  • Packed: 6 Dozen/Case

3121

EN 388 2016 Results: 3121X
Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Dipped with Rough Finish

PIP®

PVC Dipped Glove with Interlock Liner and Rough Sandy Finish - 10" Length

1017RF

  • Polymer: PVC
  • Lining: Interlock
  • Length: 10"
  • Cuff: Straight
  • Grip: Rough
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Sandy Finish

ProCoat®

Premium PVC Dipped Glove with Jersey Liner and Rough Sandy Finish - 14" Length

58-8240DD

  • Polymer: PVC
  • Lining: Jersey
  • Length: 14"
  • Cuff: Straight
  • Grip: Sandy
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case

JKL

EN 374 Results: JKL
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

Compare
PVC Dipped with Rough Finish

PIP®

PVC Dipped Glove with Interlock Liner and Rough Sandy Finish - Knit Wrist

1007RF

  • Polymer: PVC
  • Lining: Interlock
  • Length: 10"
  • Cuff: Knit Wrist
  • Grip: Rough
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Cut-and-Sewn
  • Sizes: L
  • Packed: 6 Dozen/Case
Compare
PVC Dipped with Rough Finish

PIP®

PVC Dipped Glove with Jersey Liner and Rough Sandy Finish - 18" Length

J1087RF

  • Polymer: PVC
  • Lining: Jersey
  • Length: 18"
  • Cuff: Straight
  • Grip: Rough
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case

4111

EN 388 2016 Results: 4111
Abrasion: 4
Cut (Coupe Test): 1
Tear: 1
Puncture: 1
Cut (TDM-100 Test):
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Dipped with Smooth Finish

ProCoat®

Premium PVC Dipped Glove with Interlock Liner and Smooth Finish - 10" Length

58-8020

  • Polymer: PVC
  • Lining: Interlock
  • Length: 10"
  • Cuff: Straight
  • Grip: Smooth
  • Dip: Single
  • Coating Coverage: Full Hand
  • Construction: Supported
  • Sizes: Men's
  • Packed: 10 Dozen/Case

4121

EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
SHOWING 1-36 OF 50 ITEMS
1 of 2
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL