Products Brands Industries Resources About Us Value Proposition
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE ApronCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety Accessories
Emergency ResponderFR HoodsFire & Rescue GlovesFire & Rescue Goggle
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionEyewear AccessoriesFace ProtectionSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidEyewashFirst Aid Kit
Foot ProtectionOver-the-Shoe BootsOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical ResistantCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHi Performance GloveLeather DriversLeather Palm GlovesMetal Mesh GlovesParade GlovesProtection From ColdProtection From Heat
Head ProtectionBump CapsFR HoodsHard HatsHead Protect AccessoriesSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionDisposable MasksReusable Facepieces
Warning BeaconsFlash Baton
Welding ProtectionFR ClothingHand ProtectionWelding Accessory
WorkwearWork Apparel

Cut Resistant Hand Protection

PIP® offers one of the widest ranges of coated seamless knit cut resistant gloves in the world, featuring leading brands like ATG®, G-Tek® and more. The use of cut resistant gloves has increased considerably over the years and we've led the charge with the introductions of innovative engineered yarn blends and grip technologies. Trust PIP® for every cut resistant glove need, no matter the spec, required feature, or budget.

HAND PROTECTION

Cut Resistant Gloves (22)

VIEW:
All
  • Description
  • Bullets
  • Icons
  • Hide All
SORT:
CLEAR ALL
Pair Bagged Plain
Vend Packed
Polyurethane Grip w/ PolyKor Fiber

G-Tek® Paradox™

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers with Reinforced Thumb Crotch - 21 Gauge - Touchscreen Compatible

16-541

  • Cut Level: A4
  • Liner Material: PolyKor
  • Gauge: 21
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch, Touchscreen Compatible
  • Country of Origin: China
  • Sizes: XXS-XXL
  • Packed: 12 Dozen/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

3X31DX
EN 388 2016 Results: 3X31DX
Abrasion: 3
Cut (Coupe Test): X
Tear: 3
Puncture: 1
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Nitrile Foam Grip

G-Tek® Paradox™

Seamless Knit PolyKor® Blended Glove with Foam Nitrile Coated Grip on Palm & Fingers with Reinforced Thumb Crotch - 21 Gauge - Touchscreen Compatible

16-361

  • Cut Level: A6
  • Liner Material: HPPE/ PolyKor
  • Gauge: 21
  • Weight: Ultra Lightweight
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch, Touchscreen Compatible
  • Country of Origin: China
  • Sizes: XXS-XXXL
  • Packed: 12 Dozen/Case
 
Cut Level: A6
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4X41F
EN 388 2016 Results: 4X41F
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 1
Cut (TDM-100 Test): F
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Nitrile Foam Grip

G-Tek® Paradox™

Seamless Knit PolyKor® Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers with Reinforced Thumb Crotch - 21 Gauge - Touchscreen Compatible

16-351

  • Cut Level: A5
  • Liner Material: HPPE/ PolyKor
  • Gauge: 21
  • Weight: Ultra Lightweight
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch, Touchscreen Compatible
  • Country of Origin: China
  • Sizes: XXS-2XL
  • Packed: 12 Dozen/Case
 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

3X42E
EN 388 2016 Results: 3X42E
Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): E
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Split Cowhide

Scrap King™

Seamless Knit HPPE Blended Glove with Split Cowhide Leather Palm and Aramid Stitching - Vend-Ready

09-H550SLPV

  • Cut Level: A9
  • Palm: Leather
  • Cuff: Knit Wrist
  • Construction: Seamless Knit, Reinforced Thumb Crotch
  • Country of Origin: China
  • Sizes: S-XXL
  • Packed: 72 Pair/Case
 
Cut Level: A9
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 6
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4X43FX
EN 388 2016 Results: 4X43FX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): F
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PosiGrip Max Grip with Polykor Fiber

G-Tek® Paradox™

Seamless Knit PolyKor® Blended Glove with PosiGrip MAX™ Coating on Palm & Fingers with Reinforced Thumb Crotch - 21 Gauge - Touchscreen Compatible

16-871

  • Cut Level: A7
  • Liner Material: PolyKor
  • Gauge: 21
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch, Touchscreen Compatible
  • Country of Origin: China
  • Sizes: XXS-XXXL
  • Packed: 12 Dozen/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4X42F
EN 388 2016 Results: 4X42F
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Polyurethane Grip w/ PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers - Vend-Ready

16-560V

  • Cut Level: A4
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: XXS - XXL
  • Packed: 72 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4X43DX
EN 388 2016 Results: 4X43DX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Polyurethane Grip w/ PolyKor Fiber

Barracuda®

Seamless Knit Polykor Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

719DGU

  • Cut Level: A2
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: XXS-3XL
  • Packed: 10 Dozen/Case
 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

4X42BX
EN 388 2016 Results: 4X42BX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Nitrile Foam Grip

G-Tek® Paradox™

Seamless Knit PolyKor® Blended Glove with Black Foam Nitrile Coated Grip on Palm & Fingers with Reinforced Thumb Crotch - 21 Gauge - Touchscreen Compatible

16-371

  • Cut Level: A7
  • Liner Material: PolyKor
  • Gauge: 21
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Wear Points, Touchscreen Compatible
  • Country of Origin: China
  • Sizes: XXS-XXXL
  • Packed: 12 Dozen/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4X42F
EN 388 2016 Results: 4X42F
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PosiGrip Max Grip with Polykor Fiber

G-Tek® Paradox™

Seamless Knit PolyKor® Blended Glove with PosiGrip MAX™ Coating on Palm & Fingers with Reinforced Thumb Crotch - 21 Gauge - Touchscreen Compatible

16-861

  • Cut Level: A6
  • Liner Material: PolyKor
  • Gauge: 21
  • Weight: Ultra Lightweight
  • Coating: PosiGrip Max
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch, Touchscreen Compatible
  • Country of Origin: China
  • Sizes: XXS-XXXL
  • Packed: 12 Dozen/Case
 
Cut Level: A6
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

3X41F
EN 388 2016 Results: 3X41F
Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 1
Cut (TDM-100 Test): F
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Goatskin

PIP®

Goatskin Leather Palm Glove with Leather/Fabric Back and Kevlar® Blended Liner - TPR Finger Guards

120-4100

  • Cut Level: A4
  • Palm: Leather
  • Back: Leather
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn, Reinforced Thumb Crotch
  • Country of Origin: Pakistan
  • Sizes: S-XXXL
  • Packed: 72 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

3X33DX
EN 388 2016 Results: 3X33DX
Abrasion: 3
Cut (Coupe Test): X
Tear: 3
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Polyurethane Grip w/ PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Grip on Palm & Fingers - Vend-Ready

16-318V

  • Cut Level: A2
  • Liner Material: PolyKor
  • Gauge: 18
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: XXS-XXL
  • Packed: 72 Pair/Case
 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

4342BX
EN 388 2016 Results: 4342BX
Abrasion: 4
Cut (Coupe Test): 3
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Kevlar with Crinkle Finish Latex

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® Glove with Latex Coated Crinkle Grip on Palm & Fingers - Vend-Ready

09-K1310V

  • Cut Level: A3
  • Liner Material: Kevlar
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Latex
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: S - XL
  • Packed: 72 Pair/Case
 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

2444CX
EN 388 2016 Results: 2444CX
Abrasion: 2
Cut (Coupe Test): 4
Tear: 4
Puncture: 4
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Polyurethane Grip w/ PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers - Vend-Ready

16-150V

  • Cut Level: A2
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: XS - XXXL
  • Packed: 72 Pair/Case
 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4X42BX
EN 388 2016 Results: 4X42BX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
ECO Series CR Sustainable Fiber Gloves

Great White® ECO Series™

Seamless Knit Dyneema® Diamond 2.0 Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers - Vend-Ready

19-D322V

  • Cut Level: A4
  • Liner Material: Dyneema Diamond Technology
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: XS - XXL
  • Packed: 72 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4X42DX
EN 388 2016 Results: 4X42DX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Nitrile Foam Grip

Barracuda®

Seamless Knit Polykor Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers

713HGWFN

  • Cut Level: A2
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: Viet Nam
  • Sizes: XS-XXL
  • Packed: 10 Dozen/Case
 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

4442BX
EN 388 2016 Results: 4442BX
Abrasion: 4
Cut (Coupe Test): 4
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Goatskin

PIP®

Goatskin Leather Palm Glove with Dorsal Impact Protection and Kevlar® Blended Liner - TPR Finger Guards

120-4150

  • Cut Level: A4
  • Palm: Leather
  • Back: Fabric
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn, Reinforced Thumb Crotch
  • Country of Origin: Pakistan
  • Sizes: S-XXXL
  • Packed: 72 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

3X33DX
EN 388 2016 Results: 3X33DX
Abrasion: 3
Cut (Coupe Test): X
Tear: 3
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Kevlar with Polyurethane Grip

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® / Elastane Glove with Polyurethane Coated Flat Grip on Palm & Fingers - Vend-Ready

09-K1250V

  • Cut Level: A2
  • Liner Material: Kevlar
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: S - XXL
  • Packed: 144 Pair/Case
 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4231BX
EN 388 2016 Results: 4231BX
Abrasion: 4
Cut (Coupe Test): 2
Tear: 3
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Kevlar with Solid Nitrile Grip

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® / Elastane Glove with Nitrile Coated Smooth Grip on Palm & Fingers - Vend-Ready

09-K1450V

  • Cut Level: A2
  • Liner Material: Kevlar
  • Gauge: 15
  • Weight: Medium Weight
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: XS - XXXL
  • Packed: 144 Pair/Case
 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

3221BX
EN 388 2016 Results: 3221BX
Abrasion: 3
Cut (Coupe Test): 2
Tear: 2
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Polyurethane Grip w/ PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers - Vend-Ready

16-530V

  • Cut Level: A3
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: XS - XXL
  • Packed: 72 Pair/Case
 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4X43CX
EN 388 2016 Results: 4X43CX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Polyurethane Grip w/ PolyKor Fiber

G-Tek® PosiGrip®

Lightweight, Polykor Blend with Polyurethane palm and finger flat grip coating - Vend-Ready

720DGUV

  • Cut Level: A2
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: China
  • Sizes: XS-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

4342
EN 388 2016 Results: 4342
Abrasion: 4
Cut (Coupe Test): 3
Tear: 4
Puncture: 2
Cut (TDM-100 Test):
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
ACP Kevlar Gloves

Kut Gard®

Seamless Knit ACP / DuPont™ Kevlar® Blended Glove with Cotton Lining - Medium Weight

07-KAH760

  • Cut Level: A4
  • Liner Material: ACP/ Kevlar
  • Gauge: 7
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-XL
  • Packed: 12 Dozen/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Kevlar with MicroFinish Latex Grip

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® Glove with Double-Dipped Nitrile Coated MicroSurface Grip on Palm & Fingers - Vend-Ready

09-K1660V

  • Cut Level: A2
  • Liner Material: Kevlar
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: China
  • Sizes: S-2XL
  • Packed: 72 Pair/Case
 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

4343X
EN 388 2016 Results: 4343X
Abrasion: 4
Cut (Coupe Test): 3
Tear: 4
Puncture: 3
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
SHOWING 1-22 OF 22 ITEMS
1 of 1
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL