Products Brands Industries Resources About Us Value Proposition
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE ApronCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety Accessories
Emergency ResponderFR HoodsFire & Rescue GlovesFire & Rescue Goggle
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionEyewear AccessoriesFace ProtectionSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidEyewashFirst Aid Kit
Foot ProtectionOver-the-Shoe BootsOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical ResistantCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHi Performance GloveLeather DriversLeather Palm GlovesMetal Mesh GlovesParade GlovesProtection From ColdProtection From Heat
Head ProtectionBump CapsFR HoodsHard HatsHead Protect AccessoriesSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHi-Vis RainwearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionDisposable MasksReusable Facepieces
Warning BeaconsFlash Baton
Welding ProtectionFR ClothingHand ProtectionWelding Accessory
WorkwearWork Apparel

Multifaceted Hand Protection

Using only the best in synthetics and leather materials, we manufacture multiple high performance glove brands including Boss®, Caiman®, G-Tek® and more for demanding environments and applications. High-performance hand protection combines innovative designs and materials to equip workers with protection from multiple hazards at once, including impacts, cuts, hot surfaces, arc flashes and more. Protect from more with less!

HAND PROTECTION

High Performance Gloves (16)

VIEW:
All
  • Description
  • Bullets
  • Icons
  • Hide All
SORT:
CLEAR ALL
Electrical Safety: New Construction PRODUCTS
Leather Drivers

Boss®

Top Grain Goatskin Leather Drivers Glove with Kevlar® Blend Lining and Hi-Vis Impact Protection

9916

  • Hide: Top Grain Goatskin
  • Liner Material: Kevlar/ Polyester
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Thumb: Wing
  • Lining: Kevlar
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn, Reinforced Thumb Crotch
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 1

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

3X44FP
EN 388 2016 Results: 3X44FP
Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 4
Cut (TDM-100 Test): F
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Top Grain Goatskin Drivers

Boss® Xtreme

AR Top Grain Goatskin Leather Drivers Glove with Oil Armor™ Finish and Para-Aramid Lining - TPR Impact Protection

KS993KOAB

  • ARC Rating: 43 cal/cm2
  • Hide: Top Grain Goatskin
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Thumb: Keystone
  • Lining: Aramid
  • Palm: Leather
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

 
ATPV 43 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

3X22DP
EN 388 2016 Results: 3X22DP
Abrasion: 3
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Leather Drivers

Boss®

Top Grain Sheepskin Leather Drivers Glove with Para-Aramid Blend Lining and Impact Protection

9120

  • Hide: Top Grain Sheepskin
  • Liner Material: Aramid/ Polyester
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Thumb: Keystone
  • Lining: Aramid
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

2X22DP
EN 388 2016 Results: 2X22DP
Abrasion: 2
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Top Grain Goatskin Drivers

Boss® Xtreme

AR Top Grain Goatskin Leather Drivers Glove with Oil Armor™ Finish and Para-Aramid Lining - Keystone Thumb

KS993KOA

  • ARC Rating: 43 cal/cm2
  • Hide: Top Grain Goatskin
  • Thumb: Keystone
  • Lining: Aramid
  • Palm: Leather
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
ATPV 43 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

3X22DX
EN 388 2016 Results: 3X22DX
Abrasion: 3
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Coated Seamless Knit

G-Tek®

Seamless Knit PolyKor® Blended Glove with Hi-Vis Impact Protection and Double-Dip Nitrile MicroSurface Grip on Palm & Fingers

1CF7007NTPR

  • Liner Material: PolyKor
  • Gauge: 13
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-2XL
  • Packed: 72 Pair/Case
 
Cut Level: A6
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

3X42FP
EN 388 2016 Results: 3X42FP
Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
High Performance Utility Glove

G-Tek® PolyKor®

AR Seamless Knit PolyKor®/Aramid Blend Glove with Neoprene Foam Coated Grip on Palm & Fingers

16-AR413

  • ARC Rating: 13 cal/cm2
  • Liner Material: PolyKor/ Aramid
  • Gauge: 13
  • Coating: Neoprene
  • Coating Coverage: Palm & Fingers
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-XXL
  • Packed: 6 Dozen/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

 
APTV 13 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

3X42D
EN 388 2016 Results: 3X42D
Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

4131XX
Protective Gloves Against Thermal Hazards: 4131XX
Resistance to Flammability - 4
Contact Heat Resistance - 1
Convective Heat Resistance - 3
Radiant Heat Resistance - 1
Resistance to Small Splashes of Molten Metal - X
Resistance to Large Splashes of Molten Metal - X

EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.

Compare
Coated Seamless Knit

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with Impact Protection and NeoFoam® Coated Palm & Fingers

16-MP585

  • Liner Material: PolyKor X7
  • Gauge: 18
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Coating: Neofoam
  • Coating Coverage: Palm & Fingers
  • Grip: Neofoam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch, Touchscreen Compatible
  • Sizes: M-2XL
  • Packed: 36 Pair/Case
 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 1

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

4X42EP
EN 388 2016 Results: 4X42EP
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): E
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Coated Seamless Knit

G-Tek®

Seamless Knit HPPE Blended Glove with Hi-Vis Impact Protection and Polyurethane Coated Palm & Fingers

710HGUBHVG

  • Liner Material: HPPE
  • Gauge: 10
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Grip: Flat
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 120 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 1

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

4X42DP
EN 388 2016 Results: 4X42DP
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Coated Seamless Knit

G-Tek®

Seamless Knit HPPE Blended Glove with Impact Protection and Polyurethane Coated Palm & Fingers

710HGUB

  • Liner Material: HPPE
  • Gauge: 10
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Grip: Flat
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-2XL
  • Packed: 120 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 6
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

4X42DP
EN 388 2016 Results: 4X42DP
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Coated Seamless Knit

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with Impact Protection and NeoFoam® MicroSurface Grip on Palm & Fingers

16-MP935

  • Liner Material: PolyKor X7
  • Gauge: 13
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Coating: Neofoam
  • Coating Coverage: Palm & Fingers
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: M-2XL
  • Packed: 36 Pair/Case
 
Cut Level: A9
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 1

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

4X43FP
EN 388 2016 Results: 4X43FP
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): F
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Coated Seamless Knit

G-Tek® PolyKor®

Seamless Knit Polykor Blended Glove with Hi-Vis Impact Protection and Nitrile Foam Coated Palm & Fingers

HVY710HSNFB

  • Liner Material: PolyKor
  • Gauge: 13
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch
  • Sizes: S-2XL
  • Packed: 60 Pair/Case
 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

4X42CP
EN 388 2016 Results: 4X42CP
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Coated Seamless Knit

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with Impact Protection and NeoFoam® Coated Palm & Fingers

16-MP785

  • Liner Material: PolyKor X7
  • Gauge: 18
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Coating: Neofoam
  • Coating Coverage: Palm & Fingers
  • Grip: Neofoam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: M-2XL
  • Packed: 36 Pair/Case
 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 1

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

4X42FP
EN 388 2016 Results: 4X42FP
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Leather Drivers

Boss®

Top Grain Leather Drivers Glove with Split Cowhide Back, Kevlar® Stitching and Hi-Vis Impact TPR - Cotton Liner

997KBC

  • Hide: Top Grain Cowhide
  • Liner Material: Cotton
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Thumb: Keystone
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

2132XP
EN 388 2016 Results: 2132XP
Abrasion: 2
Cut (Coupe Test): 1
Tear: 3
Puncture: 2
Cut (TDM-100 Test): X
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Leather Drivers

Boss®

Top Grain Leather Drivers Glove with Split Cowhide Back, Kevlar® Stitching and Hi-Vis Impact TPR

997KB

  • Hide: Top Grain Cowhide
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Thumb: Keystone
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: XS-3XL
  • Packed: 72 Pair/Case
 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

2132XP
EN 388 2016 Results: 2132XP
Abrasion: 2
Cut (Coupe Test): 1
Tear: 3
Puncture: 2
Cut (TDM-100 Test): X
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Coated Seamless Knit

G-Tek®

Seamless Knit HPPE Blended Glove with Impact Protection and Sandy Nitrile Coated Palm & Fingers

1CF7006FTPR

  • Liner Material: HPPE
  • Gauge: 13
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: Sandy
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: M-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 5
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4X44CX
EN 388 2016 Results: 4X44CX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 4
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Coated Seamless Knit

Barracuda®

Seamless Knit HPPE Blended Glove with Impact Protection and Polyurethane Coated Palm & Fingers

713HGWUB

  • Liner Material: HPPE
  • Gauge: 13
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Grip: Flat
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-2XL
  • Packed: 120 Pair/Case
 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4X42BX
EN 388 2016 Results: 4X42BX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
SHOWING 1-16 OF 16 ITEMS
1 of 1
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL