Products Brands Industries Resources About Us Value Proposition
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE ApronCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety Accessories
Emergency ResponderFR HoodsFire & Rescue GlovesFire & Rescue Goggle
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionEyewear AccessoriesFace ProtectionSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidEyewashFirst Aid Kit
Foot ProtectionOver-the-Shoe BootsOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical ResistantCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHi Performance GloveLeather DriversLeather Palm GlovesMetal Mesh GlovesParade GlovesProtection From ColdProtection From Heat
Head ProtectionBump CapsFR HoodsHard HatsHead Protect AccessoriesSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHi-Vis RainwearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionDisposable MasksReusable Facepieces
Warning BeaconsFlash Baton
Welding ProtectionFR ClothingHand ProtectionWelding Accessory
WorkwearWork Apparel

Multifaceted Hand Protection

Using only the best in synthetics and leather materials, we manufacture multiple high performance glove brands including Boss®, Caiman®, G-Tek® and more for demanding environments and applications. High-performance hand protection combines innovative designs and materials to equip workers with protection from multiple hazards at once, including impacts, cuts, hot surfaces, arc flashes and more. Protect from more with less!

HAND PROTECTION

High Performance Gloves (51)

VIEW:
All
  • Description
  • Bullets
  • Icons
  • Hide All
SORT:
CLEAR ALL
Slip-on Cuff
Elastic Cuff
Silicone Grip

Boss®

Synthetic Leather Palm with Red Silicone Grip and Spandex Back – TPR Impact Protection

120-MP2415

  • Liner Material: Kevlar
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Coating: Silicone
  • Grip: Silicone
  • Palm: Synthetic Leather
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn, Reinforced Thumb Crotch
  • Sizes: M-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 6
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

3X43EP
EN 388 2016 Results: 3X43EP
Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): E
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Top Grain Goatskin Drivers

Boss® Xtreme

AR Top Grain Goatskin Leather Drivers Glove with Oil Armor™ Finish and Para-Aramid Lining - TPR Impact Protection

KS993KOAB

  • ARC Rating: 43 cal/cm2
  • Hide: Top Grain Goatskin
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Thumb: Keystone
  • Lining: Aramid
  • Palm: Leather
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

 
ATPV 43 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

3X22DP
EN 388 2016 Results: 3X22DP
Abrasion: 3
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Leather Drivers

Boss®

Top Grain Sheepskin Leather Drivers Glove with Para-Aramid Blend Lining and Impact Protection

9120

  • Hide: Top Grain Sheepskin
  • Liner Material: Aramid/ Polyester
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Thumb: Keystone
  • Lining: Aramid
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

2X22DP
EN 388 2016 Results: 2X22DP
Abrasion: 2
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Top Grain Goatskin Drivers

Boss® Xtreme

AR Top Grain Goatskin Leather Drivers Glove with Oil Armor™ Finish and Para-Aramid Lining - Keystone Thumb

KS993KOA

  • ARC Rating: 43 cal/cm2
  • Hide: Top Grain Goatskin
  • Thumb: Keystone
  • Lining: Aramid
  • Palm: Leather
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
ATPV 43 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

3X22DX
EN 388 2016 Results: 3X22DX
Abrasion: 3
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Top Grain Cowhide Drivers

Boss® Xtreme

AR Top Grain Cowhide Leather Drivers Glove with Para-Aramid Lining - Keystone Thumb

KS992K

  • ARC Rating: 43 cal/cm2
  • Hide: Top Grain Cowhide
  • Thumb: Keystone
  • Lining: Aramid
  • Palm: Leather
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
ATPV 43 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

3X32D
EN 388 2016 Results: 3X32D
Abrasion: 3
Cut (Coupe Test): X
Tear: 3
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Leather Drivers

Boss®

Top Grain Goatskin Leather Drivers Glove with UHMWPE Blend Lining and Hi-Vis Impact Protection

09-LC571MP

  • Hide: Top Grain Goatskin
  • Liner Material: UHMWPE
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Thumb: Keystone
  • Lining: HPPE
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: M-3XL
  • Packed: 36 Pair/Case
 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

4X43EP
EN 388 2016 Results: 4X43EP
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): E
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Corded Cotton

Boss®

Green Corded Cotton Palm and Spandex Back with TPR Impact Protection - Insulated & Waterproof

120-MP2101W

  • Liner Material: Fleece
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Lining: Fleece
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn, Reinforced Thumb Crotch, Waterproof
  • Sizes: M-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

1X32CP
EN 388 2016 Results: 1X32CP
Abrasion: 1
Cut (Coupe Test): X
Tear: 3
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Synthetic Leather Palm

Boss®

Synthetic Leather Palm with PVC Sandy Grip Patches and Anti-Vibration Pads - Neoprene Wraparound Wrist

120-4400

  • Coating: PVC
  • Grip: Sandy
  • Palm: Synthetic Leather
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn, Adjustable Straps, Padded Palm, Reinforced Thumb Crotch
  • Sizes: S - XXL
  • Packed: 72 Pair/Case
 
Cut Level: A1
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

3121
EN 388 2016 Results: 3121
Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Top Grain Goatskin Drivers

Boss® Xtreme

AR Rated Top Grain Goatskin Leather Drivers Glove with Para-Aramid Lining - Keystone Thumb

09-LC533AR

  • ARC Rating: 44 cal/cm2
  • Hide: Top Grain Goatskin
  • Gauge: 13
  • Thumb: Keystone
  • Lining: Aramid
  • Palm: Leather
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: M-3XL
  • Packed: 6 Dozen/Case
 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
44 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

2X32E
EN 388 2016 Results: 2X32E
Abrasion: 2
Cut (Coupe Test): X
Tear: 3
Puncture: 2
Cut (TDM-100 Test): E
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Top Grain Goatskin Drivers

Boss® Xtreme

AR Top Grain Goatskin Leather Drivers Glove with Oil Armor™ Finish and Para-Aramid Lining - Fleece Lined Insulation

KS9911KP

  • ARC Rating: 43 cal/cm2
  • Hide: Top Grain Goatskin
  • Liner Material: Fleece
  • Thumb: Keystone
  • Lining: Aramid
  • Palm: Leather
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
ATPV 43 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

3X22DX
EN 388 2016 Results: 3X22DX
Abrasion: 3
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Top Grain Goatskin Drivers

Boss® Xtreme

AR/FR Top Grain Goatskin Leather Drivers Glove with Kevlar® Lining - Straight Thumb

09-K3750

  • ARC Rating: 37 cal/cm2
  • Hide: Top Grain Goatskin
  • Gauge: 13
  • Thumb: Straight
  • Lining: Kevlar
  • Palm: Leather
  • Cuff: Slip-on
  • Closure: Slip On
  • Construction: Cut-and-Sewn
  • Sizes: S-XXXL
  • Packed: 6 Dozen/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
ATPV 37 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

3X22B
EN 388 2016 Results: 3X22B
Abrasion: 3
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Corded Cotton

Boss®

Green Corded Cotton Palm and Spandex Back – TPR Impact Protection

120-MP2100

  • Liner Material: Cotton
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Palm: Polycord Canvas
  • Cuff: Elastic
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn, Reinforced Thumb Crotch
  • Sizes: M-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

1X21BP
EN 388 2016 Results: 1X21BP
Abrasion: 1
Cut (Coupe Test): X
Tear: 2
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Goat Grain Palm

Boss®

Goatskin Leather Palm with Gel + Foam Anti-Vibration Padding and Fabric Back - Half-Finger Design

122-AV70

  • Thumb: Keystone
  • Palm: Leather
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn, Half Finger
  • Sizes: S - XXL
  • Packed: 72 Pair/Case
Compare
Silicone Grip

Boss®

R2™ Safety Rigger Synthetic Leather Double Palm with Silicone Grip and Fabric Back - TPR Impact Protection

87810

  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Palm: Reinforced
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn, Reinforced Thumb Crotch, Touchscreen Compatible
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 1

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

3X32BP
EN 388 2016 Results: 3X32BP
Abrasion: 3
Cut (Coupe Test): X
Tear: 3
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Cut Resistant

Boss® Cut

Synthetic Microfiber Palm with Mesh Fabric Back and Para-Aramid Cut Lining

120-MC1225T

  • Liner Material: HPPE/ Spandex
  • Coating: Uncoated
  • Palm: Synthetic Leather
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Adjustable Straps, Cut-and-Sewn, Touchscreen Compatible
  • Sizes: S-2XL
  • Packed: 72 Pair/Case
 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

3X22E
EN 388 2016 Results: 3X22E
Abrasion: 3
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): E
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Utility

Boss® Utility

Synthetic Microfiber Palm with Mesh Fabric Back

120-MU1220T

  • Liner Material: Spandex
  • Coating: Uncoated
  • Palm: Synthetic Leather
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn, Touchscreen Compatible, Adjustable Straps
  • Sizes: S-2XL
  • Packed: 72 Pair/Case
 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

3121X
EN 388 2016 Results: 3121X
Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Grip

Boss®

Red PVC Grip Palm and Spandex Back - TPR Impact Protection

120-MP2120

  • Liner Material: Cotton
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Coating: PVC
  • Grip: Sandy
  • Palm: Synthetic Leather
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn, Reinforced Thumb Crotch
  • Sizes: M-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

4X43BP
EN 388 2016 Results: 4X43BP
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): B
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Goat Grain Palm

Caiman® MAG™

Multi-Activity Glove with White Goat Grain Leather Padded Palm and Hi-Vis Yellow AirMesh™ Back

2980

  • Hide: Top Grain Goatskin
  • Palm: Leather
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn, Padded Palm, Adjustable Straps, Leather Palm
  • Sizes: S-2XL
  • Packed: 120 Pair/Case
Compare
Leather Palm

Boss®

Synthetic Leather Palm and Hi-Vis Fabric Back - PVC Grip on Index Finger/Thumb

120-4600

  • Coating: PVC
  • Palm: Synthetic Leather
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: S - XXL
  • Packed: 72 Pair/Case
 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

2121X
EN 388 2016 Results: 2121X
Abrasion: 2
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Leather Drivers

Boss®

Top Grain Leather Drivers Glove with Split Cowhide Back, Kevlar® Stitching and Hi-Vis Impact TPR

997KB

  • Hide: Top Grain Cowhide
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Thumb: Keystone
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: XS-3XL
  • Packed: 72 Pair/Case
 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

2132XP
EN 388 2016 Results: 2132XP
Abrasion: 2
Cut (Coupe Test): 1
Tear: 3
Puncture: 2
Cut (TDM-100 Test): X
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Leather Drivers

Boss®

Top Grain Leather Drivers Glove with Split Cowhide Back, Kevlar® Stitching and Hi-Vis Impact TPR - Cotton Liner

997KBC

  • Hide: Top Grain Cowhide
  • Liner Material: Cotton
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Thumb: Keystone
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

2132XP
EN 388 2016 Results: 2132XP
Abrasion: 2
Cut (Coupe Test): 1
Tear: 3
Puncture: 2
Cut (TDM-100 Test): X
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Leather Drivers

Maximum Safety®

MOG™ Synthetic Leather Palm with Fabric Back - TPR Impact Protection

120-5900

  • Liner Material: Spandex
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Palm: Synthetic Leather
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn
  • Sizes: M - XXXL
  • Packed: 72 Pair/Case
 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 1

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

3111X
EN 388 2016 Results: 3111X
Abrasion: 3
Cut (Coupe Test): 1
Tear: 1
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Leather Palm

Boss®

ToughX™ Suede Palm with Hi-Vis Green Fabric Back and TPR Impact Protection - Touchscreen

89306

  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Palm: ToughX Suede
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn, Touchscreen Compatible, Reinforced Thumb Crotch
  • Sizes: M-2XL
  • Packed: 72 Pair/Case
Compare
Goat Grain Palm

Caiman® MAG™

Multi-Activity Glove with White Goat Grain Leather Padded Palm and Gray AirMesh™ Back - Heatrac® III Insulation

2915

  • Hide: Top Grain Goatskin
  • Lining: Heatrac
  • Palm: Leather
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn, Padded Palm, Adjustable Straps, Leather Palm
  • Sizes: S-2XL
  • Packed: 120 Pair/Case
Compare
Goat Grain Palm

Caiman® MAG™

Multi-Activity Glove with White Goat Grain Leather Padded Palm and Hi-Vis AirMesh™ Back - Heatrac® III Insulation

2919

  • Hide: Top Grain Goatskin
  • Lining: Heatrac
  • Palm: Leather
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn, Padded Palm, Adjustable Straps, Leather Palm
  • Sizes: S-2XL
  • Packed: 120 Pair/Case
Compare
Goat Grain Palm

Boss®

Goatskin Leather Palm Glove with Split Cowhide Palm Patch and FR Nomex® Back - Orange FR Fingertips

86565

  • Hide: Top Grain Goatskin
  • Thumb: Keystone
  • Palm: Reinforced
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn, Leather Palm
  • Sizes: S-2XL
  • Packed: 72 Pair/Case
Compare
Leather Palm

Boss®

Miners' Mechanic Synthetic Leather Palm with Foam Padded Back and Finger TPR Impact Protection

1JM400

  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Thumb: Wing
  • Lining: Foam
  • Palm: Synthetic Leather
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn, Reinforced Thumb Crotch
  • Sizes: M-3XL
  • Packed: 72 Pair/Case
 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 1

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

2121
EN 388 2016 Results: 2121
Abrasion: 2
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
PVC Grip

Boss®

Red PVC Grip Palm and Spandex Back – TPR Impact Protection

120-MP3120

  • Liner Material: Cotton
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Coating: PVC
  • Grip: Sandy
  • Palm: Synthetic Leather
  • Cuff: Slip-on
  • Construction: Reinforced Thumb Crotch, Cut-and-Sewn
  • Sizes: M-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 3

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

4X43BP
EN 388 2016 Results: 4X43BP
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): B
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Cut Resistant

Boss® Cut

Premium Pigskin Leather Palm with Mesh Fabric Back and Para-Aramid Cut Lining

120-MC1325T

  • Hide: Top Grain Pigskin
  • Liner Material: HPPE/ Spandex
  • Coating: Uncoated
  • Palm: Leather
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Adjustable Straps, Cut-and-Sewn, Touchscreen Compatible
  • Sizes: S-2XL
  • Packed: 72 Pair/Case
 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 6
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

3X23E
EN 388 2016 Results: 3X23E
Abrasion: 3
Cut (Coupe Test): X
Tear: 2
Puncture: 3
Cut (TDM-100 Test): E
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Grip

Boss® Grip

Synthetic Microfiber Palm with Silicone Coated Grip and Mesh Fabric Back

120-MG1220T

  • Liner Material: Spandex
  • Coating: Silicone
  • Coating Coverage: Palm & Fingers
  • Grip: Silicone
  • Palm: Synthetic Leather
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Adjustable Straps, Cut-and-Sewn, Touchscreen Compatible
  • Sizes: S-2XL
  • Packed: 72 Pair/Case
 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4121X
EN 388 2016 Results: 4121X
Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Goat Grain Palm

Caiman® MAG™

Multi-Activity Glove with Goat Grain Leather Palm and Black AirMesh™ Back - Reinforced Palm Patches - Touchscreen

2956

  • Hide: Top Grain Goatskin
  • Palm: Leather
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn, Padded Palm, Touchscreen Compatible
  • Sizes: S-2XL
  • Packed: 120 Pair/Case
Compare
PVC Grip

Boss®

Synthetic Leather Palm with PVC Dotted Grip and Spandex Back - TPR Impact Protection

120-MP2110

  • Liner Material: Cotton
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Coating: PVC
  • Grip: Dot
  • Palm: Synthetic Leather
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn, Reinforced Thumb Crotch
  • Sizes: M-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

4X22BP
EN 388 2016 Results: 4X22BP
Abrasion: 4
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Framers

Boss® Framer

Premium Pigskin Padded Leather Palm with Mesh Fabric Back and TPR Impact Protection

120-MF1360T

  • Hide: Top Grain Pigskin
  • Liner Material: Spandex
  • Impact Protection: Finger/ Back of Hand
  • Coating: Uncoated
  • Palm: Leather
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Adjustable Straps, Cut-and-Sewn, Touchscreen Compatible
  • Sizes: S-2XL
  • Packed: 72 Pair/Case
 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

3122X
EN 388 2016 Results: 3122X
Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 2
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Synthetic Leather Palm

Caiman® MAG™

Multi-Activity Glove with Synthetic Leather Padded Palm and Blue AirMesh™ Back

2950

  • Palm: Synthetic Leather
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn
  • Sizes: S-2XL
  • Packed: 120 Pair/Case
Compare
Utility

Boss® Utility

Synthetic Microfiber Palm with Mesh Fabric Back

120-MU1210T

  • Liner Material: Spandex
  • Coating: Uncoated
  • Palm: Synthetic Leather
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Adjustable Straps, Cut-and-Sewn, Touchscreen Compatible
  • Sizes: S-2XL
  • Packed: 72 Pair/Case
 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

3121X
EN 388 2016 Results: 3121X
Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Silicone Grip

R15™

Synthetic Leather Palm with Silicone Grip and Fabric Back - TPR Impact Protection

87015

  • Liner Material: Spandex
  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Coating: PVC
  • Grip: Silicone
  • Palm: Reinforced
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
 
Cut Level: A6
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

 
Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

 
ANSI Contact Heat Level: 1
Test Method: ASTM F1060-18
Temperature: 176°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

4X43FP
EN 388 2016 Results: 4X43FP
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): F
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
SHOWING 1-36 OF 51 ITEMS
1 of 2
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL