Products Brands Industries Resources About Us Value Proposition
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE ApronCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety Accessories
Emergency ResponderAccessories FR HoodsFire & Rescue GlovesFire & Rescue Goggle
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionFace ProtectionSafety Eyewear AccessoriesSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidAccessoriesEyewashFirst Aid Kit
Foot ProtectionOver-the-Shoe BootsOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical Resistant GlovesCold Protection GlovesCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHeat Protection GlovesHigh Performance GlovesLeather Drivers GlovesLeather Palm GlovesMetal Mesh GlovesParade & Uniform Gloves
Head ProtectionAccessoriesBump CapsFR HoodsHard HatsSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionDisposable MasksReusable Facepieces
Warning BeaconsFlash Baton
Welding ProtectionAccessoriesFR ClothingHand Protection
WorkwearWork Apparel

Built for Rugged Work

PIP is very diligent about the grades of hides that it specifies and offers for its numerous styles of leather gloves used in multiple general handling applications. Further to this, we pay strict attention to all aspects of the cut and sew confection. There are many providers of leather gloves around the world. PIP has over 60 quality control personnel for on-site inspection. We believe this makes all the difference for peace of mind and a consistent product.

HAND PROTECTION

Leather Palm Gloves (10)

VIEW:
All
  • Description
  • Bullets
  • Icons
  • Hide All
SORT:
CLEAR ALL
Country of Origin: Pakistan
Country of Origin: China
Split Cowhide

Scrap King™

Seamless Knit HPPE Blended Glove with Split Cowhide Leather Palm and Aramid Stitching - Vend-Ready

09-H550SLPV

  • Hide: Split Cowhide
  • Palm: Leather
  • Cuff: Knit Wrist
  • Stitching: Aramid
  • Construction: Seamless Knit, Reinforced Thumb Crotch
  • Sizes: S-XXL
  • Packed: 72 Pair/Case
 
Cut Level: A9
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 6
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4X43FX
EN 388 2016 Results: 4X43FX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): F
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Goatskin

PIP®

Goatskin Leather Palm Glove with Leather/Fabric Back and Kevlar® Blended Liner - TPR Finger Guards

120-4100

  • Hide: Top Grain Goatskin
  • Palm: Leather
  • Cuff: Slip-on
  • Back: Leather
  • Stitching: Kevlar
  • Construction: Cut-and-Sewn, Reinforced Thumb Crotch
  • Sizes: S-XXXL
  • Packed: 72 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

3X33DX
EN 388 2016 Results: 3X33DX
Abrasion: 3
Cut (Coupe Test): X
Tear: 3
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Split Cowhide

PIP®

Seamless Knit ATA® Aramid Blended Glove with Split Cowhide Leather Palm - Knit Wrist

MATA30-BH

  • Hide: Split Cowhide
  • Palm: Leather
  • Cuff: Knit Wrist
  • Back: Aramid
  • Stitching: Kevlar
  • Construction: Seamless Knit, Reinforced Thumb Crotch
  • Sizes: S-2XL
  • Packed: 12 Dozen/Case
 
Cut Level: A6
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X43F
EN 388 2016 Results: 4X43F
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): F
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Goatskin

PIP®

Goatskin Leather Palm Glove with Dorsal Impact Protection and Kevlar® Blended Liner - TPR Finger Guards

120-4150

  • Hide: Top Grain Goatskin
  • Palm: Leather
  • Cuff: Slip-on
  • Back: Fabric
  • Stitching: Kevlar
  • Construction: Cut-and-Sewn, Reinforced Thumb Crotch
  • Sizes: S-XXXL
  • Packed: 72 Pair/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

3X33DX
EN 388 2016 Results: 3X33DX
Abrasion: 3
Cut (Coupe Test): X
Tear: 3
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Goatskin

PIP®

Goatskin Leather Palm Glove with Leather/Fabric Back and TPR Finger Guards

120-4200

  • Hide: Top Grain Goatskin
  • Palm: Leather
  • Cuff: Slip-on
  • Back: Leather
  • Stitching: Nylon
  • Construction: Cut-and-Sewn, Reinforced Thumb Crotch
  • Sizes: S - XXL
  • Packed: 72 Pair/Case
 
Cut Level: A1
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

2X21AX
EN 388 2016 Results: 2X21AX
Abrasion: 2
Cut (Coupe Test): X
Tear: 2
Puncture: 1
Cut (TDM-100 Test): A
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Goat Grain Palm

Boss®

Goatskin Leather Palm Glove with Split Cowhide Palm Patch and FR Nomex® Back - Orange FR Fingertips

86565

  • Hide: Top Grain Goatskin
  • Palm: Reinforced
  • Cuff: Slip-on
  • Back: Aramid
  • Thumb: Keystone
  • Construction: Cut-and-Sewn, Leather Palm
  • Sizes: S-2XL
  • Packed: 72 Pair/Case
Compare
Split Cowhide

Kut Gard®

Seamless Knit Kevlar® Glove with Split Cowhide Leather Palm and Kevlar® Stitching - Knit Wrist

09-K300LP

  • Hide: Split Cowhide
  • Palm: Leather
  • Cuff: Knit Wrist
  • Stitching: Kevlar
  • Construction: Seamless Knit, Reinforced Thumb Crotch
  • Sizes: S - XL
  • Packed: 6 Dozen/Case
 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4443DX
EN 388 2016 Results: 4443DX
Abrasion: 4
Cut (Coupe Test): 4
Tear: 4
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Synthetic Leather

PIP®

Synthetic Leather Palm Glove with Kevlar® Blended Liner - Flame Retardant Treated

73-1703

  • Palm: Synthetic Leather
  • Cuff: Slip-on
  • Stitching: Kevlar
  • Construction: Cut-and-Sewn, Reinforced Thumb Crotch
  • Sizes: S - XXXL
  • Packed: 6 Dozen/Case
 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X42CX
EN 388 2016 Results: 3X42CX
Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Split Cowhide

PIP®

Seamless Knit HPPE Blend Glove with Split Cowhide Leather Palm and DuPont™ Kevlar® Stitching - Knit Wrist

730TGLP

  • Hide: Split Cowhide
  • Cuff: Knit Wrist
  • Construction: Seamless Knit, Leather Palm, Reinforced Thumb Crotch
  • Sizes: M-XL
  • Packed: 12 Dozen/Case
 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X44EX
EN 388 2016 Results: 4X44EX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 4
Cut (TDM-100 Test): E
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Leather Palms with Knitwrists

PIP®

Economy Grade Split Cowhide Leather Palm Glove with Fabric Back and Patch Palm

86-4104P

  • Grade: Economy
  • Hide: Split Cowhide
  • Palm: Split Cowhide
  • Cuff: Knit Wrist
  • Back: Fabric
  • Thumb: Straight
  • Stitching: Nylon
  • Construction: Clute Cut
  • Sizes: L
  • Packed: 10 Dozen/Case
Compare
SHOWING 1-10 OF 10 ITEMS
1 of 1
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL