Products Brands Industries Resources About Us Value Proposition
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety Accessories
Emergency ResponderAccessories FR HoodsFire & Rescue GlovesFire & Rescue Goggle
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionFace ProtectionSafety Eyewear AccessoriesSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidAccessoriesFirst Aid Kit
Foot ProtectionOver-the-ShoeOver-the-Shoe BootsOver-the-SockOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical Resistant GlovesCold Protection GlovesCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHeat Protection GlovesHigh Performance GlovesLeather Drivers GlovesLeather Palm GlovesMetal Mesh GlovesParade & Uniform Gloves
Head ProtectionAccessoriesBump CapsFR HoodsHard HatsSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionDisposable MasksReusable Facepieces
Warning BeaconsFlash Baton
Welding ProtectionAccessoriesFR ClothingHand ProtectionHead Protection
WorkwearWork Apparel

Welding Protection

The key to injury reduction is not just product, it's understanding applications so that the right safety product is used. Welding is inherently dangerous. Gas, flame, sparks, blinding light – nothing can be left to chance. PIP® offers the right product designed specifically for protecting professional welders. Tailored to work with the different types of welding.

SHOWING 1-10 OF 10 ITEMS
1 of 1
FILTERS:
CLEAR ALL
Aramid Lining
TIG Welding Gloves BEST SELLER

Ironcat®

AR Premium Kidskin Leather TIG Welder's Glove with Para-Aramid Cut Lining and Kevlar® Stitching - Gauntlet Cuff

6144

  • Top Grain Kidskin
  • Premium Grade
  • Para-Aramid Liner
  • Kevlar® Stitching
  • ATPV 36 cal/cm2
  • Keystone Thumb
  • 5.5" Split Cow Gauntlet Cuff
  • Tagged
  • Sizes: XS-2XL
  • Packed: 72 Pair/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X22D

EN 388 2016 Results: 3X22D
Abrasion: 3
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

ATPV 36 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Compare
TIG Welding Gloves

Ironcat®

AR Premium Grade Kidskin Leather TIG Welder's Glove with Para-Aramid Cut Liner and Kevlar® Stitching - TPR Impact Protection

6244

  • Top Grain Kidskin
  • Premium Grade
  • Para-Aramid Liner
  • Kevlar® Stitching
  • ATPV 37 cal/cm2
  • L2 Impact TPR
  • 4.5"Split Cowhide Gauntlet Cuff
  • Tagged
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X22D

EN 388 2016 Results: 3X22DP
Abrasion: 3
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ANSI Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

ansi-impact-2
ANSI Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

ATPV 37 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Compare
TIG Welding Gloves

Caiman®

Premium Goat Grain TIG/Multi-Task Welder's Glove with Split Cowhide Back and Para-Aramid Cut Lining

1541

  • Goat Grain Palm
  • Gold Split Cowhide Back
  • Padded Palm w/ Drag Patch
  • Para-Aramid Liner
  • Kevlar® Stitching
  • Kontour™ Design
  • 4" Cuff
  • Tagged
  • Sizes: L-XL
  • Packed: 72 Pair/Case
ansi-A5
ANSI Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
TIG Welding Gloves

Ironcat®

AR Premium Kidskin Leather TIG Welder's Glove with Para-Aramid Cut Lining and Kevlar® Stitching - Gauntlet Cuff

6147

  • Top Grain Kidskin
  • Premium Grade
  • Para-Aramid Liner
  • Kevlar® Stitching
  • ATPV 36 cal/cm2
  • Side Drag Patch
  • 4.5" Split Cow Gauntlet Cuff
  • Tagged
  • Sizes: XS-2XL
  • Packed: 72 Pair/Case
ansi-A7
ANSI Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X23F

EN 388 2016 Results: 3X23FX
Abrasion: 3
Cut (Coupe Test): X
Tear: 2
Puncture: 3
Cut (TDM-100 Test): F
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ANSI Puncture Level: 4
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

312XXX

Protective Gloves Against Thermal Hazards: 312XXX
Resistance to Flammability - 3
Contact Heat Resistance - 1
Convective Heat Resistance - 2
Radiant Heat Resistance - X
Resistance to Small Splashes of Molten Metal - X
Resistance to Large Splashes of Molten Metal - X

EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.

ATPV 36 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Compare
MIG Welding Gloves

Ironcat®

AR Premium Top Grain Cowhide Leather MIG Welder's Glove with Kevlar® Stitching & Para-Aramid Liner

6040

  • Top Grain White Cowhide
  • Premium Grade
  • Para-Aramid Cut Liner
  • Kevlar® Stitching
  • ATPV 34 cal/cm2
  • 4" Gold Split Cowhide Gauntlet Cuff
  • Tagged
  • Sizes: S-2XL
  • Packed: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ANSI Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

APTV 34 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Compare
Leather Drivers Gloves

Ironcat®

AR Top Grain Cowhide Leather Drivers Glove with Split Cowhide Back and Para-Aramid Lining - Keystone Thumb

9444

  • Premium Cowhide Palm
  • Split Cowhide Brown Back
  • Keystone Thumb
  • Para- Aramid Liner
  • ATPV 27 cal/cm2
  • Kevlar® Stitching
  • Slip-On Cuff
  • Tagged
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ANSI Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

ATPV 27 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Compare
Leather Drivers Gloves

Ironcat®

AR Top Grain Goatskin Leather Drivers Glove with Oil Armor™ Finish and Para-Aramid Lining - High Heat Impact TPR

IC993KOAB

  • Goatskin Leather Drivers
  • Premium Grade
  • Keystone Thumb
  • Oil Armor™ Finish
  • Para-Aramid Cut Lining
  • ANSI L2 Impact
  • ATPV 43 cal/cm2
  • Tagged
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X22D

EN 388 2016 Results: 3X22DX
Abrasion: 3
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-impact-2
ANSI Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

ATPV 43 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Compare
MIG Welding Gloves

Caiman®

Premium Split Cowhide MIG/Stick Welder's Glove with Para-Aramid Cut Lining

1507

  • Blue Split Cowhide
  • Para-Aramid Cut Liner
  • Reinforced Palm & Thumb Strap
  • Kevlar® Stitching
  • Kontour™ Design
  • Gray 4"Split Cow Cuff
  • Tagged
  • Sizes: L
  • Packed: 60 Pair/Case
ansi-A5
ANSI Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Leather Drivers Gloves

Ironcat®

AR Top Grain Goatskin Leather Drivers Glove with Oil Armor™ Finish and Para-Aramid Lining - Keystone Thumb

IC993KOA

  • Goatskin Leather Drivers
  • Premium Grade
  • Keystone Thumb
  • Oil Armor™ Finish
  • Para-Aramid Cut Lining
  • ATPV 43 cal/cm2
  • Slip-On Cuff
  • Tagged
  • Sizes: S-3XL
  • Packed: 72 Pair/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X22D

EN 388 2016 Results: 3X22DX
Abrasion: 3
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ATPV 43 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Compare
Stick Welding Gloves

Ironcat®

AR Premium Grade Split Cowhide Leather Welder's Glove with Para-Aramid Cut Lining

946

  • Blue Split Cowhide
  • Premium Grade
  • Para-Aramid Cut Liner
  • Fully Welted
  • Kevlar® Stitching
  • Reinforced Palm & Thumb Strap
  • ATPV 63 cal/cm2
  • 14"L
  • Sizes: S-2XL
  • Packed: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ANSI Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

ATPV 63 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Compare
SHOWING 1-10 OF 10 ITEMS
1 of 1
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL