Products Brands Industries Resources About Us Value Proposition
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety Accessories
Emergency ResponderAccessories FR HoodsFire & Rescue GlovesFire & Rescue Goggle
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionFace ProtectionSafety Eyewear AccessoriesSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidAccessoriesFirst Aid Kit
Foot ProtectionOver-the-Shoe BootsOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical Resistant GlovesCold Protection GlovesCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHeat Protection GlovesHigh Performance GlovesLeather Drivers GlovesLeather Palm GlovesMetal Mesh GlovesParade & Uniform Gloves
Head ProtectionAccessoriesBump CapsFR HoodsHard HatsSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionDisposable MasksReusable Facepieces
Warning BeaconsFlash Baton
Welding ProtectionAccessoriesFR ClothingHand Protection
WorkwearWork Apparel

Protect Your Arms

When using hand protection, you should also consider arm protection to extend your safety coverage to protect against other potential injuries. Whether you handle large or sharp objects, are exposed to sparks or just need to have your forearms covered, protective sleeves can produce various solutions to meet your safety needs.

SHOWING 1-36 OF 81 ITEMS
1 of 3
FILTERS:
CLEAR ALL
Industrial Safety: Transportation PRODUCTS
Rubber

Kut Gard®

Single-Ply ATA® / Hide-Away™ FR Blended Sleeve with Thumb Hole - Wide Width

S13ATAFR/2HA-EW-ES6T

  • ANSI Cut Level: A2
  • ANSI Abrasion Level: 1
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Aramid/ Polyester
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Non-Slip
  • Construction: Machine Knit
  • Sizes: 18, 22
  • Packed: 72/Case
ansi-A2
ANSI Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-1
ANSI Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Tube Knit

Kut Gard®

ATA® / HPPE Blended Sleeve with Hook and Loop Closure with Thumb Hole

20-S13ATA/PE4-T-VEL

  • ANSI Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Velcro Closure
  • Construction: Machine Knit
  • Sizes: 18" + 22"
  • Packed: 144/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Tube Knit

Kut Gard®

ATA Technology, HPPE, 13 Gauge, ANSI A4 Sleeve with Top of Arm Hook and Loop Closure

20-S13ATA/PE4HVOTVEL

  • ANSI Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Velcro Closure
  • Construction: Machine Knit
  • Sizes: 18", 22"
  • Packed: 144/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

2-Ply Tube Knit

Kut Gard®

2-Ply DuPont™ Kevlar® Sleeve

10-BKDS

  • ANSI Cut Level: A3
  • ANSI Abrasion Level: 1
  • Ply: 2-Ply
  • Liner Material: Kevlar
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 8"-24"
  • Packed: 144/Case
ansi-A3
ANSI Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-1
ANSI Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Machine Knit

Kut Gard®

ATA®/ HPPE Blended Sleeve with Thumb Hole

20-S13ATA/PE4-T

  • ANSI Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Overstitched Elastic
  • Construction: Machine Knit
  • Sizes: 18"
  • Packed: 144/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply 2x2_5 Tube Knit

Claw Cover®

2-Ply ACP / Dyneema® Blended Sleeve

20-DA

  • ANSI Cut Level: A4
  • Ply: 2-Ply
  • Liner Material: ACP/ Dyneema
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 10"-24"
  • Packed: 144/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Tube Knit

Kut Gard®

ATA®/ HPPE Blended Sleeve

20-S13ATA/PE6

  • ANSI Cut Level: A6
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Top of Arm: Overstitched Elastic
  • Construction: Machine Knit
  • Sizes: 18"
  • Packed: 144/Case
ansi-A6
ANSI Cut Level: A6
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Tube Knit

Kut Gard®

ATA® / HPPE Blended Sleeve with Hook and Loop Closure

20-S13ATA/PE4-VEL

  • ANSI Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Top of Arm: Velcro Closure
  • Construction: Machine Knit
  • Sizes: 18", 22"
  • Packed: 144/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Machine Knit

Kut Gard®

Single-Ply Pritex™ Blended Sleeve with Antimicrobial Fibers and Smart-Fit®

15-21PRIBPS

  • ANSI Cut Level: A2
  • Ply: Single-Ply
  • Liner Material: Antimicrobial/ Pritex
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 8"-24"
  • Packed: 144/Case
ansi-A2
ANSI Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Rubber

Kut Gard®

Single-Ply ATA® / Sta-Cool™ Blended Sleeve

S10ATAFRCM/4-ES6

  • ANSI Cut Level: A4
  • ANSI Abrasion Level: 2
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Aramid/ Sta-Cool
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Non-Slip
  • Construction: Machine Knit, Seamless Knit
  • Sizes: 18, 22
  • Packed: 72/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-2
ANSI Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Tube Knit

Kut Gard®

ATA®/ HPPE Blended Sleeve with Thumb Hole

20-S13ATA/PE5-T

  • ANSI Cut Level: A5
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Overstitched Elastic
  • Construction: Machine Knit
  • Sizes: 18"-22"
  • Packed: 144/Case
ansi-A5
ANSI Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply 2x2_5 Tube Knit

Kut Gard®

2-Ply ACP / Dyneema® Blended Sleeve with Thumb Hole

20-DATO

  • ANSI Cut Level: A4
  • Ply: 2-Ply
  • Liner Material: ACP/ Dyneema
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 18"
  • Packed: 144/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

2-Ply Tube Knit

Kut Gard®

Single-Ply ACP / Dyneema® Blended Sleeve with Smart-Fit® and Thumb Hole

20-21DACPBPTH

  • ANSI Cut Level: A4
  • ANSI Abrasion Level: 1
  • Ply: Single-Ply
  • Liner Material: ACP/ Dyneema
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 14-24
  • Packed: 144/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-1
ANSI Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Tube Knit

Kut Gard®

ATA®/ HPPE Blended Sleeve with Thumb Hole

20-S10ATA/PE8-T

  • ANSI Cut Level: A8
  • ANSI Abrasion Level: 4
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE/ Stainless Steel Wire
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Overstitched Elastic
  • Construction: Machine Knit
  • Sizes: 18"
  • Packed: 144/Case
ansi-A8
ANSI Cut Level: A8
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Tube Knit

Kut Gard®

ATA®/ HPPE Blended Sleeve with Thumb Hole

20-S10ATA/PE9-T

  • ANSI Cut Level: A9
  • ANSI Abrasion Level: 4
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE/ Stainless Steel Wire
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Overstitched Elastic
  • Construction: Machine Knit
  • Sizes: 18"
  • Packed: 144/Case
ansi-A9
ANSI Cut Level: A9
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Tube Knit

Kut Gard®

ATA®/ HPPE Blended Sleeve

20-S13ATA/PE5

  • ANSI Cut Level: A5
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Top of Arm: Overstitched Elastic
  • Construction: Machine Knit
  • Sizes: 18"
  • Packed: 144/Case
ansi-A5
ANSI Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Smart Fit

Kut Gard®

Single-Ply Pritex™ Blended Sleeve with Antimicrobial Fibers and Smart-Fit®

15-21PRIWPS

  • ANSI Cut Level: A2
  • Ply: Single-Ply
  • Liner Material: Antimicrobial/ Pritex
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 8"-24"
  • Packed: 144/Case
ansi-A2
ANSI Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Tube Knit

Kut Gard®

ATA®/ HPPE Blended Sleeve

20-S13ATA/PE2

  • ANSI Cut Level: A2
  • ANSI Abrasion Level: 2
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Top of Arm: Elastic Ends
  • Construction: Machine Knit
  • Sizes: 18"
  • Packed: 144/Case
ansi-A2
ANSI Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-2
ANSI Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Tube Knit

Kut Gard®

ATA®/ HPPE Blended Sleeve

20-S13ATA/PE3

  • ANSI Cut Level: A3
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Top of Arm: Overstitched Elastic
  • Construction: Machine Knit
  • Sizes: 18"
  • Packed: 144/Case
ansi-A3
ANSI Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Smart Fit

Kut Gard®

Single-Ply ATA® Hide-Away™ FR / Aramid Blended Sleeve with Thumb Hole

10-SATA/HAFR-T

  • ANSI Cut Level: A3
  • Ply: Single-Ply
  • Liner Material: Aramid/ ATA Fiber Technology
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Overstitched Elastic
  • Construction: Tube Knit
  • Sizes: 18", 22", 24"
  • Packed: 144/Case
ansi-A3
ANSI Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Tube Knit

Kut Gard®

ATA®/ HPPE Blended Sleeve with Thumb Hole

20-S13ATA/PE6-T

  • ANSI Cut Level: A6
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Overstitched Elastic
  • Construction: Machine Knit
  • Sizes: 18"
  • Packed: 144/Case
ansi-A6
ANSI Cut Level: A6
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

2-Ply Tube Knit

Claw Cover®

Single-Ply ACP / Dyneema® Blended Sleeve with Smart-Fit®

20-21DACP

  • ANSI Cut Level: A3
  • Ply: Single-Ply
  • Liner Material: ACP/ Dyneema
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 18"
  • Packed: 144/Case
ansi-A3
ANSI Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Machine Knit

Kut Gard®

Single-Ply Pritex™ Blended Blousy Sleeve with Antimicrobial Fibers - Narrow Width

15-2BKS

  • ANSI Cut Level: A2
  • Ply: Single-Ply
  • Liner Material: Antimicrobial/ Pritex
  • Top of Arm: Elastic Cuff
  • Construction: Blousy
  • Sizes: 12"-24"
  • Packed: 144/Case
ansi-A2
ANSI Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Smart Fit

Kut Gard®

Single-Ply Pritex™ Blended Sleeve with Antimicrobial Fibers, Smart-Fit® and Thumb Hole

15-21PRIWPSTH

  • ANSI Cut Level: A2
  • Ply: Single-Ply
  • Liner Material: Antimicrobial/ Pritex
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 18", 20"
  • Packed: 144/Case
ansi-A2
ANSI Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Lined Split Cowhide Drivers

Kut Gard®

Single-Ply ATA® / Modacrylic Blended Sleeve with Thumb Hole

S10ATAFR/5BK-ES6-T

  • ANSI Cut Level: A5
  • ANSI Abrasion Level: 1
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Modacrylic
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Non-Slip
  • Construction: Machine Knit, Seamless Knit
  • Sizes: 18, 22
  • Packed: 72/Case
ansi-A5
ANSI Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-1
ANSI Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Tube Knit

Kut Gard®

ATA®/ HPPE Blended Sleeve with Thumb Hole

20-S13ATA/PE3-T

  • ANSI Cut Level: A3
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Overstitched Elastic
  • Construction: Machine Knit
  • Sizes: 18"
  • Packed: 144/Case
ansi-A3
ANSI Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Machine Knit

Kut Gard®

Single-Ply Pritex™ Blended Blousy Sleeve with Antimicrobial Fibers

15-2BKL

  • ANSI Cut Level: A2
  • Ply: Single-Ply
  • Liner Material: Antimicrobial/ Pritex
  • Top of Arm: Elastic Cuff
  • Construction: Blousy
  • Sizes: 14"-18"
  • Packed: 144/Case
ansi-A2
ANSI Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Rubber

Kut Gard®

Single-Ply ATA® / Hide-Away™ FR Blended Sleeve Blended Sleeve

S13ATAFR/4HA-ES6

  • ANSI Cut Level: A4
  • ANSI Abrasion Level: 1
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: Aramid/ ATA Fiber Technology/ Stainless Steel Wire
  • Top of Arm: Non-Slip
  • Construction: Machine Knit, Seamless Knit
  • Sizes: 18, 22
  • Packed: 72/Case
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-1
ANSI Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

2-Ply Tube Knit

Claw Cover®

2-Ply Dyneema® Diamond Technology Blended Sleeve

20-TG

  • ANSI Cut Level: A3
  • Ply: 2-Ply
  • Liner Material: Dyneema Diamond Technology
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 14"-21"
  • Packed: 144/Case
ansi-A3
ANSI Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Tube Knit

Kut Gard®

ATA®/ HPPE Blended Sleeve

20-S10ATA/PE8

  • ANSI Cut Level: A8
  • ANSI Abrasion Level: 4
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE/ Stainless Steel Wire
  • Top of Arm: Overstitched Elastic
  • Construction: Machine Knit
  • Sizes: 18"
  • Packed: 144/Case
ansi-A8
ANSI Cut Level: A8
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Smart Fit BEST SELLER

Kut Gard®

Single-Ply ATA® Hide-Away™ Blended Sleeve with Thumb Hole

MSATA/HA-T

  • ANSI Cut Level: A3
  • ANSI Abrasion Level: 1
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Hide-Away
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 12"-22"
  • Packed: 144/Case
ansi-A3
ANSI Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-1
ANSI Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Cut and Sewn

Kut Gard®

Single-Ply ATA® Blended Sleeve with Thumb Hole

MSATP-T

  • ANSI Cut Level: A2
  • ANSI Abrasion Level: 1
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Polyester
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 18"-24"
  • Packed: 200/Case
ansi-A2
ANSI Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-1
ANSI Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Smart Fit

Kut Gard®

Single-Ply ATA® Hide-Away™ FR / Aramid Blended Sleeve

10-SATA/HAFR

  • ANSI Cut Level: A3
  • Ply: Single-Ply
  • Liner Material: Aramid/ ATA Fiber Technology
  • Top of Arm: Overstitched Elastic
  • Construction: Tube Knit
  • Sizes: 18"
  • Packed: 144/Case
ansi-A3
ANSI Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

2-Ply Tube Knit

Claw Cover®

Single-Ply ACP / Dyneema® Blended Sleeve with Smart-Fit® and Thumb Hole

20-21DACPTH

  • ANSI Cut Level: A3
  • Ply: Single-Ply
  • Liner Material: ACP/ Dyneema
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 18"
  • Packed: 144/Case
ansi-A3
ANSI Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

PVC

Kut Gard®

Single-Ply ATA® Hide-Away™ Blended Sleeve with Sta-Cool™ Plating with Thumb Hole

MSATA/HACM-T

  • ANSI Cut Level: A5
  • Ply: 2-Ply
  • Liner Material: ATA Fiber Technology/ Hide-Away/ Sta-Cool
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 24"
  • Packed: 144/Case
ansi-A5
ANSI Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Machine Knit

Kut Gard®

Single-Ply Pritex™ Blended Blousy Sleeve with Antimicrobial Fibers and Thumb Hole - Narrow Width

15-2BKSTO

  • ANSI Cut Level: A2
  • Ply: Single-Ply
  • Liner Material: Antimicrobial/ Pritex
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: Blousy
  • Sizes: 14"
  • Packed: 144/Case
ansi-A2
ANSI Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

SHOWING 1-36 OF 81 ITEMS
1 of 3
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL