Products Brands Industries Resources About Us Value Proposition
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE ApronCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety Accessories
Emergency ResponderFR HoodsFire & Rescue GlovesFire & Rescue Goggle
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionEyewear AccessoriesFace ProtectionSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidEyewashFirst Aid Kit
Foot ProtectionOver-the-Shoe BootsOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical ResistantCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHi Performance GloveLeather DriversLeather Palm GlovesMetal Mesh GlovesParade GlovesProtection From ColdProtection From Heat
Head ProtectionBump CapsFR HoodsHard HatsHead Protect AccessoriesSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionDisposable MasksReusable Facepieces
Warning BeaconsFlash Baton
Welding ProtectionFR ClothingHand ProtectionWelding Accessory
WorkwearWork Apparel

Glove Selector: Chemical Protection
START OVER

CHEMICAL NAME
Sodium hydroxide, 40%
CAS NUMBER
1310-73-2

Assurance®

Premium PVC Dipped Glove with Jersey Liner and Rough Sandy Finish - 14" Length

58-8240DD

  • Polymer: PVC
  • Lining: Jersey
  • Length: 14"
  • Cuff: Straight
  • Grip: Sandy
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case
JKL
EN 374 Results: JKL
Type: B
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

PIP®

Unsupported Latex, Flock Lined with Raised Diamond Grip - 18 Mil

2312

  • Polymer: Latex
  • Thickness: 18 Mil
  • Lining: Flocked
  • Cuff: Pinked
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: 7-10
  • Packed: 12 Dozen/Case
KLMPST
EN 374 Results: KLMPST
Type: A
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
P: Hydrogen Peroxide 30%
S: Hydrogen Fluoride 40%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Nitrile, Flock Lined with Raised Diamond Grip - 15 Mil

50-N150G

  • Polymer: Nitrile
  • Thickness: 15 Mil
  • Lining: Flocked
  • Length: 13"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S-XXL
  • Packed: 12 Dozen/Case
AJKLPOT
EN 374 Results: AJKLPOT
Type: A
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
P: Hydrogen Peroxide 30%
O: Ammonium Hydroxide 25%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Grippaz™ Skins

Extended Use Ambidextrous Nitrile Glove with Textured Fish Scale Grip - 6 Mil

67-256

  • Grade: Superior
  • Polymer: Nitrile
  • Thickness: 6 Mil
  • Grip: Fish Scale
  • Powder: Powder Free
  • Construction: ESD Safe, Touchscreen Compatible
  • Box Count: 50
  • Sizes: S-XXL
  • Packed: 10 Boxes/Case
JKTP
EN 374 Results: JKTP
Type: B
J: Heptane
K: Sodium Hydroxide 40%
T: Formaldehyde 37%
P: Hydrogen Peroxide 30%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

ChemGrip™

Neoprene Coated Glove with Foam Insulated Liner and Etched Rough Finish - 18"

57-8653R

  • Polymer: Neoprene
  • Lining: Foam
  • Length: 18"
  • Cuff: Straight
  • Grip: Etched
  • Dip: Multi
  • Construction: Supported
  • Sizes: L
  • Packed: 36 Pair/Case
KLPT
EN 374 Results: KLPT
Type: B
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Chemguard+™

Lightweight Neoprene Coating with Cotton Knit Lining and 11" Long Pinked Cuff

1CN0034

  • Polymer: Neoprene
  • Thickness: 53 Mil
  • Lining: Cotton
  • Length: 11"
  • Cuff: Straight
  • Grip: Smooth
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: M-XL
  • Packed: 72 Pair/Case
AKLOPT
EN 374 Results: AKLOPT
Type: A
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
O: Ammonium Hydroxide 25%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Chemguard+™

Black Heavyweight Neoprene with Interlock Liner and Smooth Grip

1SN2510

  • Polymer: Neoprene
  • Lining: Interlock
  • Cuff: Knit Wrist
  • Grip: Smooth
  • Coating Coverage: Full Hand
  • Construction: Supported
  • Sizes: L
  • Packed: 72 Pair/Case
AJKLPTS
EN 374 Results: AJKLPTS
Type: A
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%
S: Hydrogen Fluoride 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

ProCoat®

Premium PVC Dipped Glove with Jersey Liner and Rough Acid Finish - 10" Length

58-8020DD

  • Polymer: PVC
  • Lining: Jersey
  • Length: 10"
  • Cuff: Straight
  • Grip: Rough Acid
  • Dip: Double
  • Coating Coverage: Full Hand
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case
JKL
EN 374 Results: JKL
Type: B
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

ProCoat®

Premium PVC Dipped Glove with Jersey Liner and Rough Acid Finish - 12" Length

58-8025DD

  • Polymer: PVC
  • Lining: Jersey
  • Length: 12"
  • Cuff: Straight
  • Grip: Rough Acid
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case
JKL
EN 374 Results: JKL
Type: B
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Premium PVC Dipped Glove with Jersey Liner and Rough Acid Finish - 12" Length

58-8030DD

  • Polymer: PVC
  • Lining: Jersey
  • Length: 12"
  • Cuff: Straight
  • Grip: Rough Acid
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case
JKL
EN 374 Results: JKL
Type: B
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Premium PVC Dipped Glove with Jersey Liner and Rough Acid Finish - 14" Length

58-8040DD

  • Polymer: PVC
  • Lining: Jersey
  • Length: 14"
  • Cuff: Straight
  • Grip: Rough Acid
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case
JKL
EN 374 Results: JKL
Type: B
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

ProCoat®

Premium PVC Dipped Glove with Interlock Liner and Rough Sandy Finish - 10" Length

58-8120DD

  • Polymer: PVC
  • Lining: Interlock
  • Length: 10"
  • Cuff: Straight
  • Grip: Sandy
  • Dip: Double
  • Coating Coverage: Full Hand
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case
JKL
EN 374 Results: JKL
Type: B
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Premium PVC Dipped Glove with Interlock Liner and Rough Sandy Finish - 12" Length

58-8130DD

  • Polymer: PVC
  • Lining: Interlock
  • Length: 12"
  • Cuff: Straight
  • Grip: Sandy
  • Dip: Double
  • Coating Coverage: Full Hand
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case
JKL
EN 374 Results: JKL
Type: B
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

ProCoat®

Premium PVC Dipped Glove with Interlock Liner and Rough Sandy Finish - 14" Length

58-8140DD

  • Polymer: PVC
  • Lining: Interlock
  • Length: 14"
  • Cuff: Straight
  • Grip: Sandy
  • Dip: Double
  • Coating Coverage: Full Hand
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case
JKL
EN 374 Results: JKL
Type: B
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

ProCoat®

Premium PVC Dipped Glove with Jersey Liner and Rough Sandy Finish - 12" Length

58-8230DD

  • Polymer: PVC
  • Lining: Jersey
  • Length: 12"
  • Cuff: Straight
  • Grip: Sandy
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case
JKL
EN 374 Results: JKL
Type: B
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Latex, Flock Lined with Honeycomb Grip - 18 Mil

48-L187Y

  • Polymer: Latex
  • Thickness: 18 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Straight
  • Grip: Honeycomb
  • Construction: Unsupported
  • Sizes: S - XL
  • Packed: 12 Dozen/Case
KLMPST
EN 374 Results: KLMPST
Type: A
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
P: Hydrogen Peroxide 30%
S: Hydrogen Fluoride 40%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

XtraTuff™

Oil Resistant PVC Glove with Seamless Liner and Rough Coating - 10"

58-8655

  • Polymer: PVC
  • Lining: String Knit
  • Length: 10"
  • Cuff: Gauntlet
  • Grip: Rough
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Seamless Knit
  • Sizes: S - XL
  • Packed: 6 Dozen/Case
AJKL
EN 374 Results: AJKL
Type: B
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

XtraTuff™

Oil Resistant PVC Glove with Seamless Liner and Rough Coating - 12"

58-8656

  • Polymer: PVC
  • Lining: Interlock
  • Length: 12"
  • Cuff: Straight
  • Grip: Rough
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: S - XXL
  • Packed: 6 Dozen/Case
AJKL
EN 374 Results: AJKL
Type: B
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Grippaz™ Skins

Extended Use Ambidextrous Nitrile Glove with Textured Fish Scale Grip - 4.5 Mil

67-305

  • Grade: Superior
  • Polymer: Nitrile
  • Thickness: 4.5 Mil
  • Grip: Fish Scale
  • Powder: Powder Free
  • Construction: ESD Safe, Touchscreen Compatible
  • Box Count: 100
  • Sizes: S-XXXL
  • Packed: 10 Boxes/Case
JKTP
EN 374 Results: JKTP
Type: B
J: Heptane
K: Sodium Hydroxide 40%
T: Formaldehyde 37%
P: Hydrogen Peroxide 30%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Neoprene/Latex, Flock Lined with Raised Diamond Grip - 19 Mil

52-3672

  • Polymer: Neoprene over Latex
  • Thickness: 19 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S - XL
  • Packed: 12 Dozen/Case
KPT
EN 374 Results: KPT
Type: B
K: Sodium Hydroxide 40%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

QRP® Qualatherm®

Heat & Cold Resistant Glove with Silicone Rubber Outer Shell and Nylon Lining - 12"

70G

  • ISO Cleanroom: ISO 5 (Class 100)
  • Temperature Resistant: Extreme Cold
  • Liner Material: Nylon
  • Polymer: Silicone
  • Coating: Silicone
  • Coating Coverage: Full Hand
  • Grip: Smooth
  • Lining: Nylon
  • Cuff: Open
  • Length: 12"
  • Construction: Supported
  • Sizes: M-XL
  • Packed: 1 Pair/Case
JKL
EN 374 Results: JKL
Type: B
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Ambi-dex®

Disposable Nitrile Glove, Powder Free with Textured Grip - 7 mil

2940/XL2XL

  • Grade: Industrial
  • Polymer: Nitrile
  • Thickness: 7 Mil
  • Grip: Textured
  • Powder: Powder Free
  • Box Count: 90
  • Sizes: XL-2XL
  • Packed: 10 Boxes/Case

Ambi-dex®

Disposable Nitrile Glove, Powder Free with Textured Grip - 7 mil

2940

  • Grade: Industrial
  • Polymer: Nitrile
  • Thickness: 7 Mil
  • Grip: Textured
  • Powder: Powder Free
  • Box Count: 100
  • Sizes: S-L
  • Packed: 10 Boxes/Case

Ambi-dex® Overdrive

Disposable Nitrile Glove, Powder Free with Textured Grip - 6 mil

63-336PF

  • Grade: Premium Industrial
  • Polymer: Nitrile
  • Thickness: 6 Mil
  • Grip: Textured
  • Powder: Powder Free
  • Box Count: 100
  • Sizes: S - XL
  • Packed: 10 Boxes/Case

Assurance®

Nitrile Coated Glove with PolyKor® Blended Liner and MicroSurface Grip on Palm & Fingers - 14"

56-586CR

  • Polymer: Nitrile
  • Length: 14"
  • Cuff: Straight
  • Grip: MicroSurface
  • Dip: Single
  • Coating Coverage: Palm & Fingers
  • Liner Material: PolyKor
  • Construction: Supported
  • Sizes: XS-XXL
  • Packed: 6 Dozen/Case
AJKLMNOPT
EN 374 Results: AJKLMNOPT
Type: A
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
N: Acetic Acid 99%
O: Ammonium Hydroxide 25%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

12 Mil Butyl Rubber Glove with Rough Grip-14"

BUT03R

  • Polymer: Butyl
  • Thickness: 12 Mil
  • Length: 14"
  • Cuff: Rolled
  • Grip: Rough
  • Construction: ESD Safe, Unsupported
  • Sizes: 7-11
  • Packed: 48 Pair/Case
ABIKLNOT
EN 374 Results: ABIKLNOT
Type: A
A: Methanol
B: Acetone
I: Ethyl Acetate
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
N: Acetic Acid 99%
O: Ammonium Hydroxide 25%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

12 Mil Butyl Rubber Glove with Smooth Grip-14"

BUT03

  • Polymer: Butyl
  • Thickness: 12 Mil
  • Length: 14"
  • Cuff: Rolled
  • Grip: Smooth
  • Construction: ESD Safe, Unsupported
  • Sizes: 7-11
  • Packed: 48 Pair/Case
ABIKLNOT
EN 374 Results: ABIKLNOT
Type: A
A: Methanol
B: Acetone
I: Ethyl Acetate
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
N: Acetic Acid 99%
O: Ammonium Hydroxide 25%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

20 Mil Butyl Rubber Glove with Rough Grip-14"

BUT05R

  • Polymer: Butyl
  • Thickness: 20 Mil
  • Length: 14"
  • Cuff: Rolled
  • Grip: Rough
  • Construction: ESD Safe, Unsupported
  • Sizes: 7-11
  • Packed: 48 Pair/Case
ABIKLNOT
EN 374 Results: ABIKLNOT
Type: A
A: Methanol
B: Acetone
I: Ethyl Acetate
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
N: Acetic Acid 99%
O: Ammonium Hydroxide 25%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Nitrile, Flock Lined with Raised Diamond Grip - 15 Mil

50-N160G

  • Polymer: Nitrile
  • Thickness: 15 Mil
  • Lining: Flocked
  • Length: 13"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: XS - XXL
  • Packed: 12 Dozen/Case
AJKLMNOPT
EN 374 Results: AJKLMNOPT
Type: A
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
N: Acetic Acid 99%
O: Ammonium Hydroxide 25%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

QRP® PolyTuff®

Permeation Series Glove

T1

  • Polymer: Ethylene Vinyl Alcohol
  • Length: 16"
  • Cuff: Open
  • Grip: Smooth
  • Coating Coverage: Full Hand
  • Construction: Unsupported
  • Sizes: M-L
  • Packed: 15 Bags/Case
BCDFIL
EN 374 Results: BCDFIL
Type: A
B: Acetone
C: Acetonitrile
D: Dichloromethane
F: Toluene
I: Ethyl Acetate
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

QRP® Qualatherm®

Heat & Cold Resistant Glove with Silicon Rubber Outer Shell and Nylon Lining - 15"

74G

  • ISO Cleanroom: ISO 5 (Class 100)
  • Temperature Resistant: Extreme Cold
  • Liner Material: Nylon
  • Polymer: Silicone
  • Coating: Silicone
  • Coating Coverage: Full Hand
  • Grip: Smooth
  • Lining: Nylon
  • Cuff: Open
  • Length: 15"
  • Construction: Supported
  • Sizes: L-XL
  • Packed: 15 Pair/Case
JKL
EN 374 Results: JKL
Type: B
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Nitrile, Unlined with Raised Diamond Grip - 11 Mil

50-N110G

  • Polymer: Nitrile
  • Thickness: 11 Mil
  • Lining: Unlined
  • Length: 13"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S - XXL
  • Packed: 12 Dozen/Case
ABK
EN 374 Results: ABK
Type: B
A: Methanol
B: Acetone
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Heavy Duty Unsupported Latex, Unlined with Smooth Finish - 44 Mil

47-L442

  • Polymer: Latex
  • Thickness: 44 Mil
  • Lining: Unlined
  • Length: 17"
  • Cuff: Rolled
  • Grip: Smooth
  • Construction: Unsupported
  • Sizes: M - XL
  • Packed: 1 Dozen/Case
AKL
EN 374 Results: AKL
Type: B
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

XtraTuff™

Cold Resistant PVC Glove with Detachable Acrylic Liner and Sandy Coating - Insulated & Waterproof

58-8658DL

  • Polymer: PVC
  • Lining: Acrylic
  • Length: 12"
  • Cuff: Straight
  • Grip: Rough
  • Coating Coverage: Full Hand
  • Liner Material: Interlock/ Terry Cloth
  • Construction: Seamless Knit, Supported
  • Sizes: L - XXL
  • Packed: 6 Dozen/Case
AJK
EN 374 Results: AJK
Type: B
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

XtraTuff™

Oil Resistant PVC Glove with DuPont™ Kevlar® Liner and Rough Grip

58-8658K

  • Polymer: PVC
  • Length: 12"
  • Cuff: Open
  • Grip: Rough
  • Coating Coverage: Full Hand
  • Liner Material: Kevlar
  • Construction: Seamless Knit
  • Sizes: M-XL
  • Packed: 6 Dozen/Case
AJK
EN 374 Results: AJK
Type: B
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Nitrile, Flock Lined with Raised Diamond Grip - 15 Mil

50-N160B

  • Polymer: Nitrile
  • Thickness: 15 Mil
  • Lining: Flocked
  • Length: 13"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: XS - XXL
  • Packed: 12 Dozen/Case
AJKLMNOPT
EN 374 Results: AJKLMNOPT
Type: A
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
N: Acetic Acid 99%
O: Ammonium Hydroxide 25%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

QRP® PolyTuff®

16" PU EVOH, Apron POLYTUFF Permeation

T2

  • Length: 50"
  • Sizes: OS
  • Packed: 15/Case
BCDFIL
EN 374 Results: BCDFIL
Type: A
B: Acetone
C: Acetonitrile
D: Dichloromethane
F: Toluene
I: Ethyl Acetate
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Grippaz™ Skins

Extended Use Ambidextrous Nitrile Glove with Textured Fish Scale Grip - 6 Mil

67-246

  • Grade: Superior
  • Polymer: Nitrile
  • Thickness: 6 Mil
  • Grip: Fish Scale
  • Powder: Powder Free
  • Construction: ESD Safe, Touchscreen Compatible
  • Box Count: 50
  • Sizes: S-XXL
  • Packed: 10 Boxes/Case
JKTP
EN 374 Results: JKTP
Type: B
J: Heptane
K: Sodium Hydroxide 40%
T: Formaldehyde 37%
P: Hydrogen Peroxide 30%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

FEN
FENTANYL PROTECTION
Test Method: ASTM D6978-05

In accordance with ASTM D6978-05, Personal Protective Equipment can be tested to ensure an effective barrier against Fentanyl. The ASTM D6978-05 Standard Practice for Assessment of Medical Gloves to Permeation by Chemotherapy Drug tests a breakthrough time of typically 240 minutes to determine if the PPE provides an effective barrier.

Assurance®

Unsupported Nitrile, Unlined with Raised Diamond Grip - 15 Mil

50-N140B

  • Polymer: Nitrile
  • Thickness: 15 Mil
  • Lining: Unlined
  • Length: 13"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S - XXL
  • Packed: 12 Dozen/Case
AJK
EN 374 Results: AJK
Type: B
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

QRP® Qualatherm®

Heat & Cold Resistant Glove with Silicone Rubber Outer Shell and Nylon Lining - 23"

75G

  • ISO Cleanroom: ISO 5 (Class 100)
  • Temperature Resistant: Extreme Cold
  • Liner Material: Nylon
  • Polymer: Silicone
  • Coating: Silicone
  • Coating Coverage: Full Hand
  • Grip: Smooth
  • Lining: Nylon
  • Cuff: Open
  • Length: 23"
  • Construction: Supported
  • Sizes: L
  • Packed: 15 Pair/Case
JKL
EN 374 Results: JKL
Type: B
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Grippaz™ Engage

Extended Use Ambidextrous Nitrile Glove with Textured Fish Scale Grip - 7 Mil

67-307

  • Grade: Superior
  • Polymer: Nitrile
  • Thickness: 7 Mil
  • Grip: Fish Scale
  • Powder: Powder Free
  • Construction: ESD Safe, Touchscreen Compatible
  • Box Count: 50
  • Sizes: S-3XL
  • Packed: 10 Boxes/Case
JKTP
EN 374 Results: JKTP
Type: B
J: Heptane
K: Sodium Hydroxide 40%
T: Formaldehyde 37%
P: Hydrogen Peroxide 30%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Grippaz™ Jan San

Extended Use Ambidextrous Nitrile Glove with Textured Fish Scale Grip - 6 Mil

67-306

  • Grade: Superior
  • Polymer: Nitrile
  • Thickness: 6 Mil
  • Grip: Fish Scale
  • Powder: Powder Free
  • Construction: ESD Safe, Touchscreen Compatible
  • Box Count: 48
  • Sizes: S-XXL
  • Packed: 10 Boxes/Case
JKTP
EN 374 Results: JKTP
Type: B
J: Heptane
K: Sodium Hydroxide 40%
T: Formaldehyde 37%
P: Hydrogen Peroxide 30%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

PosiGrip®

Unsupported Nitrile, Flock Lined with Raised Diamond Grip - 18 Mil

52N104

  • Polymer: Nitrile
  • Thickness: 18 Mil
  • Lining: Flocked
  • Length: 13"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: 8-11
  • Packed: 12 Dozen/Case
AJKLMNOPT
EN 374 Results: AJKLMNOPT
Type: A
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
N: Acetic Acid 99%
O: Ammonium Hydroxide 25%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Latex, Flock Lined with Honeycomb Grip - 14 Mil

48-L140Y

  • Polymer: Latex
  • Thickness: 14 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Rolled
  • Grip: Honeycomb
  • Construction: Unsupported
  • Sizes: S-XL
  • Packed: 12 Dozen/Case
KLMPST
EN 374 Results: KLMPST
Type: A
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
P: Hydrogen Peroxide 30%
S: Hydrogen Fluoride 40%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Latex, Industrial Flock Lined with Honeycomb Grip - 28 Mil

48-L302T

  • Polymer: Latex
  • Thickness: 28 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Straight
  • Grip: Honeycomb
  • Construction: Unsupported
  • Sizes: S - XL
  • Packed: 12 Dozen/Case
AKLMNPST
EN 374 Results: AKLMNPST
Type: A
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
N: Acetic Acid 99%
P: Hydrogen Peroxide 30%
S: Hydrogen Fluoride 40%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Latex, Flock Lined with Raised Diamond Grip - 16 Mil

48-L162Y

  • Polymer: Latex
  • Thickness: 16 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Pinked
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S - XL
  • Packed: 12 Dozen/Case
KPT
EN 374 Results: KPT
Type: B
K: Sodium Hydroxide 40%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Latex, Flock Lined with Raised Diamond Grip - 16 Mil

48-L160Y

  • Polymer: Latex
  • Thickness: 16 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S - XL
  • Packed: 12 Dozen/Case
KPT
EN 374 Results: KPT
Type: B
K: Sodium Hydroxide 40%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Latex, Industrial Flock Lined with Raised Diamond Grip - 28 Mil

48-L300K

  • Polymer: Latex
  • Thickness: 28 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: M - XXL
  • Packed: 12 Dozen/Case
AJKLNPT
EN 374 Results: AJKLNPT
Type: A
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
N: Acetic Acid 99%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Chemguard+™

14" Long Heavyweight Neoprene with Interlock Lined and Crinkle Grip

1SN2537

  • Polymer: Neoprene
  • Lining: Interlock
  • Length: 14"
  • Cuff: Gauntlet
  • Grip: Crinkle
  • Coating Coverage: Full Hand
  • Construction: Supported
  • Sizes: L
  • Packed: 72 Pair/Case
AKLPT
EN 374 Results: AKLPT
Type: B
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

ChemGrip™

Neoprene Coated Glove with Interlock Liner and Etched Rough Finish - 12"

57-8630R

  • Polymer: Neoprene
  • Lining: Interlock
  • Length: 12"
  • Cuff: Straight
  • Grip: Etched
  • Dip: Multi
  • Liner Material: Interlock
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case
AKLPT
EN 374 Results: AKLPT
Type: B
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Chemguard+™

18" Long Heavyweight Neoprene with Flannel Lined and Crinkle Grip

1SN2539

  • Polymer: Neoprene
  • Lining: Cotton
  • Length: 18"
  • Cuff: Gauntlet
  • Grip: Crinkle
  • Construction: Supported
  • Sizes: L
  • Packed: 36 Pair/Case
ALKPT
EN 374 Results: ALKPT
Type: B
A: Methanol
L: Sulfuric Acid 96%
K: Sodium Hydroxide 40%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Grippaz™ Food Plus

Extended Use Ambidextrous Nitrile Glove with Textured Fish Scale Grip - 8 Mil - Bagged

67-308

  • Grade: Superior
  • Polymer: Nitrile
  • Thickness: 8 Mil
  • Grip: Fish Scale
  • Powder: Powder Free
  • Construction: ESD Safe, Touchscreen Compatible
  • Box Count: 48
  • Sizes: M-5XL
  • Packed: 10 Bags/Case
JKTP
EN 374 Results: JKTP
Type: B
J: Heptane
K: Sodium Hydroxide 40%
T: Formaldehyde 37%
P: Hydrogen Peroxide 30%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

FEN
FENTANYL PROTECTION
Test Method: ASTM D6978-05

In accordance with ASTM D6978-05, Personal Protective Equipment can be tested to ensure an effective barrier against Fentanyl. The ASTM D6978-05 Standard Practice for Assessment of Medical Gloves to Permeation by Chemotherapy Drug tests a breakthrough time of typically 240 minutes to determine if the PPE provides an effective barrier.

Assurance®

Unsupported Latex Canner, Unlined with Raised Diamond Grip - 18 MIl

47-L171N

  • Polymer: Latex
  • Thickness: 18 Mil
  • Lining: Unlined
  • Length: 12"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S - XL
  • Packed: 12 Dozen/Case
ABK
EN 374 Results: ABK
Type: B
A: Methanol
B: Acetone
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4

Performance Level: 4

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 176 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Latex Canner, Unlined with Raised Diamond Grip -18 Mil

47-L171B

  • Polymer: Latex
  • Thickness: 18 Mil
  • Lining: Unlined
  • Length: 12"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S - XL
  • Packed: 12 Dozen/Case
ABK
EN 374 Results: ABK
Type: B
A: Methanol
B: Acetone
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4

Performance Level: 4

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 176 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Latex Canner, Unlined with Raised Diamond Grip - 18 Mil

47-L170Y

  • Polymer: Latex
  • Thickness: 18 Mil
  • Lining: Unlined
  • Length: 12"
  • Cuff: Rolled
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: M-XL
  • Packed: 12 Dozen/Case
ABK
EN 374 Results: ABK
Type: B
A: Methanol
B: Acetone
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4

Performance Level: 4

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 176 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Latex, Flock Lined with Honeycomb Grip - 18 Mil

48-L185B

  • Polymer: Latex
  • Thickness: 18 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Pinked
  • Grip: Honeycomb
  • Construction: Unsupported
  • Sizes: S - XL
  • Packed: 12 Dozen/Case
KLMPST
EN 374 Results: KLMPST
Type: A
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
P: Hydrogen Peroxide 30%
S: Hydrogen Fluoride 40%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4

Performance Level: 4

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 132 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Latex, Flock Lined with Honeycomb Grip - 18 Mil

48-L185T

  • Polymer: Latex
  • Thickness: 18 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Rolled
  • Grip: Honeycomb
  • Construction: Unsupported
  • Sizes: S - XL
  • Packed: 12 Dozen/Case
AKLMNPST
EN 374 Results: AKLMNPST
Type: A
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
N: Acetic Acid 99%
P: Hydrogen Peroxide 30%
S: Hydrogen Fluoride 40%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4

Performance Level: 4

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 132 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Latex, Flock Lined with Honeycomb Grip - 18 Mil

48-L185P

  • Polymer: Latex
  • Thickness: 18 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Pinked
  • Grip: Honeycomb
  • Construction: Unsupported
  • Sizes: S - XL
  • Packed: 12 Dozen/Case
AKL
EN 374 Results: AKL
Type: B
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4

Performance Level: 4

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 132 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Latex, Industrial Flock Lined with Raised Diamond Grip - 21 Mil

48-L212Y

  • Polymer: Latex
  • Thickness: 21 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Rolled
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: XS - XL
  • Packed: 12 Dozen/Case
ABK
EN 374 Results: ABK
Type: B
A: Methanol
B: Acetone
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4

Performance Level: 4

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 144 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

CAUTION: This guide is provided as an aid in determining the general suitability of various products for use with specific chemicals. These recommendations are advisory only and the SUITABILITY OF THE PRODUCT FOR A SPECIFIC APPLICATION OR ENVIRONMENT MUST BE DETERMINED BY THE PURCHASER OR USER OF THE PRODUCT. This webpage should be used as a guide only.
Compare ()
Clear All Compare
Okay, Got it.