Products Brands Industries Resources About Us Value Proposition
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety Accessories
Emergency ResponderAccessories FR HoodsFire & Rescue GlovesFire & Rescue Goggle
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionFace ProtectionSafety Eyewear AccessoriesSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidAccessoriesFirst Aid Kit
Foot ProtectionOver-the-ShoeOver-the-Shoe BootsOver-the-SockOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical Resistant GlovesCold Protection GlovesCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHeat Protection GlovesHigh Performance GlovesLeather Drivers GlovesLeather Palm GlovesMetal Mesh GlovesParade & Uniform Gloves
Head ProtectionAccessoriesBump CapsFR HoodsHard HatsSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionDisposable MasksReusable Facepieces
Warning BeaconsFlash Baton
Welding ProtectionAccessoriesFR ClothingHand ProtectionHead Protection
WorkwearWork Apparel

Glove Selector: Chemical Protection
START OVER

CHEMICAL NAME
Sulfuric acid, 96%
CAS NUMBER
7664-93-9

QRP® PolyTuff®

16" PU EVOH, Apron POLYTUFF Permeation

T2

  • Length: 50"
  • Sizes: OS
  • Packed: 15/Case

BCDFIL

EN 374 Results: BCDFIL
B: Acetone
C: Acetonitrile
D: Dichloromethane
F: Toluene
I: Ethyl Acetate
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

6

Performance Level: 6

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >480 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

ProCoat®

Premium PVC Dipped Glove with Jersey Liner and Premium Sandy Finish - 14" Length

58-8364

  • Cuff: Straight
  • Grip: Sandy
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case

JKL

EN 374 Results: JKL
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

5

Performance Level: 5

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 255 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

ProCoat®

Premium PVC Dipped Glove with Jersey Liner and Rough Acid Finish - 14" Length

58-8035DD

  • Polymer: PVC
  • Lining: Jersey
  • Length: 14"
  • Cuff: Straight
  • Grip: Rough Acid
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case

JKL

EN 374 Results: JKL
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

5

Performance Level: 5

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 255 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

ProCoat®

Premium PVC Dipped Glove with Jersey Liner and Rough Acid Finish - 14" Length

58-8040DD

  • Polymer: PVC
  • Lining: Jersey
  • Length: 14"
  • Cuff: Straight
  • Grip: Rough Acid
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case

JKL

EN 374 Results: JKL
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

5

Performance Level: 5

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 255 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

ProCoat®

Premium PVC Dipped Glove with Interlock Liner and Rough Sandy Finish - 10" Length

58-8120DD

  • Polymer: PVC
  • Lining: Interlock
  • Length: 10"
  • Cuff: Straight
  • Grip: Sandy
  • Dip: Double
  • Coating Coverage: Full Hand
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case

JKL

EN 374 Results: JKL
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

5

Performance Level: 5

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 255 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

ProCoat®

Premium PVC Dipped Glove with Interlock Liner and Rough Sandy Finish - 12" Length

58-8130DD

  • Polymer: PVC
  • Lining: Interlock
  • Length: 12"
  • Cuff: Straight
  • Grip: Sandy
  • Dip: Double
  • Coating Coverage: Full Hand
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case

JKL

EN 374 Results: JKL
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

5

Performance Level: 5

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 255 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

ProCoat®

Premium PVC Dipped Glove with Interlock Liner and Rough Sandy Finish - 14" Length

58-8140DD

  • Polymer: PVC
  • Lining: Interlock
  • Length: 14"
  • Cuff: Straight
  • Grip: Sandy
  • Dip: Double
  • Coating Coverage: Full Hand
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case

JKL

EN 374 Results: JKL
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

5

Performance Level: 5

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 255 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Neoprene, Flock Lined with Raised Diamond Grip - 28 Mil

52-3665

  • Polymer: Neoprene
  • Thickness: 28 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S - XL
  • Packed: 12 Dozen/Case

AKL

EN 374 Results: AKL
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

5

Performance Level: 5

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 260 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

ProCoat®

Premium PVC Dipped Glove with Jersey Liner and Rough Sandy Finish - 12" Length

58-8230DD

  • Polymer: PVC
  • Lining: Jersey
  • Length: 12"
  • Cuff: Straight
  • Grip: Sandy
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case

JKL

EN 374 Results: JKL
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

5

Performance Level: 5

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 255 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

ProCoat®

Premium PVC Dipped Glove with Jersey Liner and Rough Sandy Finish - 14" Length

58-8240DD

  • Polymer: PVC
  • Lining: Jersey
  • Length: 14"
  • Cuff: Straight
  • Grip: Sandy
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case

JKL

EN 374 Results: JKL
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

5

Performance Level: 5

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 255 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

ProCoat®

Premium PVC Dipped Glove with Jersey Liner and Rough Acid Finish - 12" Length

58-8030DD

  • Polymer: PVC
  • Lining: Jersey
  • Length: 12"
  • Cuff: Straight
  • Grip: Rough Acid
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case

JKL

EN 374 Results: JKL
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

5

Performance Level: 5

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 255 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

ProCoat®

Premium PVC Dipped Glove with Jersey Liner and Rough Acid Finish - 12" Length

58-8025DD

  • Polymer: PVC
  • Lining: Jersey
  • Length: 12"
  • Cuff: Straight
  • Grip: Rough Acid
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case

JKL

EN 374 Results: JKL
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

5

Performance Level: 5

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 255 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

ProCoat®

Premium PVC Dipped Glove with Jersey Liner and Rough Acid Finish - 10" Length

58-8020DD

  • Polymer: PVC
  • Lining: Jersey
  • Length: 10"
  • Cuff: Straight
  • Grip: Rough Acid
  • Dip: Double
  • Coating Coverage: Full Hand
  • Construction: Supported
  • Sizes: Men's
  • Packed: 6 Dozen/Case

JKL

EN 374 Results: JKL
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

5

Performance Level: 5

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 255 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Latex, Industrial Flock Lined with Raised Diamond Grip - 28 Mil

48-L300K

  • Polymer: Latex
  • Thickness: 28 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: M - XXL
  • Packed: 12 Dozen/Case

AJKLNPT

EN 374 Results: AJKLNPT
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
N: Acetic Acid 99%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4

Performance Level: 4

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >120 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Chemguard+™

Black Heavyweight Neoprene with Interlock Liner and Smooth Grip

1SN2510

  • Polymer: Neoprene
  • Lining: Interlock
  • Cuff: Knit Wrist
  • Grip: Smooth
  • Coating Coverage: Full Hand
  • Construction: Supported
  • Sizes: L
  • Packed: 72 Pair/Case

AJKLPTS

EN 374 Results: AJKLPTS
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%
S: Hydrogen Fluoride 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4

Performance Level: 4

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 157 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Latex, Industrial Flock Lined with Honeycomb Grip - 28 Mil

48-L302T

  • Polymer: Latex
  • Thickness: 28 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Straight
  • Grip: Honeycomb
  • Construction: Unsupported
  • Sizes: S - XL
  • Packed: 12 Dozen/Case

AKLMNPST

EN 374 Results: AKLMNPST
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
N: Acetic Acid 99%
P: Hydrogen Peroxide 30%
S: Hydrogen Fluoride 40%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4

Performance Level: 4

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >120 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

XtraTuff™

Oil Resistant PVC Glove with Seamless Liner and Rough Coating - 10"

58-8655

  • Polymer: PVC
  • Lining: String Knit
  • Length: 10"
  • Cuff: Gauntlet
  • Grip: Rough
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Seamless Knit
  • Sizes: S - XL
  • Packed: 6 Dozen/Case

AJKL

EN 374 Results: AJKL
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4

Performance Level: 4

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 146 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Nitrile, Unlined with Raised Diamond Grip - 22 Mil

50-N2250G

  • Polymer: Nitrile
  • Thickness: 22 Mil
  • Lining: Unlined
  • Length: 15"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: M - XXL
  • Packed: 1 Dozen/Case

AJK

EN 374 Results: AJK
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4

Performance Level: 4

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 150 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Nitrile, Flock Lined with Raised Diamond Grip - 15 Mil

50-N160B

  • Polymer: Nitrile
  • Thickness: 15 Mil
  • Lining: Flocked
  • Length: 13"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: XS - XXL
  • Packed: 12 Dozen/Case

AJKLMNOPT

EN 374 Results: AJKLMNOPT
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
N: Acetic Acid 99%
O: Ammonium Hydroxide 25%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4

Performance Level: 4

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 150 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

BEST SELLER

Assurance®

Unsupported Nitrile, Unlined with Sandpatch Grip - 22 Mil

50-N2272G

  • Polymer: Nitrile
  • Thickness: 22 Mil
  • Lining: Unlined
  • Length: 18"
  • Cuff: Straight
  • Grip: Sandpatch
  • Construction: Unsupported
  • Sizes: M - XXL
  • Packed: 1 Dozen/Case

AJK

EN 374 Results: AJK
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4

Performance Level: 4

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 150 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Latex, Industrial Flock Lined with Raised Diamond Grip - 21 Mil

48-L212Y

  • Polymer: Latex
  • Thickness: 21 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Rolled
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: XS - XL
  • Packed: 12 Dozen/Case

ABK

EN 374 Results: ABK
A: Methanol
B: Acetone
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4

Performance Level: 4

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 135 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

BEST SELLER

XtraTuff™

Oil Resistant PVC Glove with Seamless Liner and Rough Coating - 12"

58-8656

  • Polymer: PVC
  • Lining: Interlock
  • Length: 12"
  • Cuff: Straight
  • Grip: Rough
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: S - XXL
  • Packed: 6 Dozen/Case

AJKL

EN 374 Results: AJKL
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4

Performance Level: 4

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 146 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Neoprene/Latex, Flock Lined with Raised Diamond Grip - 28 Mil

52-3670

  • Polymer: Neoprene over Latex
  • Thickness: 28 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S - XXXL
  • Packed: 12 Dozen/Case

AKL

EN 374 Results: AKL
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4

Performance Level: 4

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 180 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

BEST SELLER

Assurance®

Unsupported Nitrile, Flock Lined with Raised Diamond Grip - 15 Mil

50-N150G

  • Polymer: Nitrile
  • Thickness: 15 Mil
  • Lining: Flocked
  • Length: 13"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S-XXL
  • Packed: 12 Dozen/Case

AJKLPOT

EN 374 Results: AJKLPOT
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
P: Hydrogen Peroxide 30%
O: Ammonium Hydroxide 25%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

3

Performance Level: 3

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >60 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

PosiGrip®

Unsupported Nitrile, Flock Lined with Raised Diamond Grip - 18 Mil

52N104

  • Polymer: Nitrile
  • Thickness: 18 Mil
  • Lining: Flocked
  • Length: 13"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: 8-11
  • Packed: 12 Dozen/Case

AJKLMNOPT

EN 374 Results: AJKLMNOPT
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
N: Acetic Acid 99%
O: Ammonium Hydroxide 25%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

3

Performance Level: 3

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >60 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Nitrile Coated Glove with PolyKor® Blended Liner and MicroSurface Grip on Palm & Fingers - 14"

56-586CR

  • Polymer: Nitrile
  • Length: 14"
  • Cuff: Straight
  • Grip: MicroSurface
  • Dip: Single
  • Coating Coverage: Palm & Fingers
  • Liner Material: PolyKor
  • Construction: Supported
  • Sizes: XS-XXL
  • Packed: 6 Dozen/Case

Assurance®

Unsupported Latex, Flock Lined with Honeycomb Grip - 18 Mil

48-L185B

  • Polymer: Latex
  • Thickness: 18 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Pinked
  • Grip: Honeycomb
  • Construction: Unsupported
  • Sizes: S - XL
  • Packed: 12 Dozen/Case

KLMPST

EN 374 Results: KLMPST
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
P: Hydrogen Peroxide 30%
S: Hydrogen Fluoride 40%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

3

Performance Level: 3

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 110 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Latex Canner, Unlined with Raised Diamond Grip - 18 MIl

47-L171N

  • Polymer: Latex
  • Thickness: 18 Mil
  • Lining: Unlined
  • Length: 12"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S - XL
  • Packed: 12 Dozen/Case

ABK

EN 374 Results: ABK
A: Methanol
B: Acetone
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

3

Performance Level: 3

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 95 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Latex Canner, Unlined with Raised Diamond Grip -18 Mil

47-L171B

  • Polymer: Latex
  • Thickness: 18 Mil
  • Lining: Unlined
  • Length: 12"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S - XL
  • Packed: 12 Dozen/Case

ABK

EN 374 Results: ABK
A: Methanol
B: Acetone
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

3

Performance Level: 3

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 95 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Latex Canner, Unlined with Raised Diamond Grip - 18 Mil

47-L170Y

  • Polymer: Latex
  • Thickness: 18 Mil
  • Lining: Unlined
  • Length: 12"
  • Cuff: Rolled
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: M-XL
  • Packed: 12 Dozen/Case

ABK

EN 374 Results: ABK
A: Methanol
B: Acetone
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

3

Performance Level: 3

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 95 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Latex, Flock Lined with Honeycomb Grip - 18 Mil

48-L185T

  • Polymer: Latex
  • Thickness: 18 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Rolled
  • Grip: Honeycomb
  • Construction: Unsupported
  • Sizes: S - XL
  • Packed: 12 Dozen/Case

AKLMNPST

EN 374 Results: AKLMNPST
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
N: Acetic Acid 99%
P: Hydrogen Peroxide 30%
S: Hydrogen Fluoride 40%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

3

Performance Level: 3

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 110 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Latex, Flock Lined with Honeycomb Grip - 18 Mil

48-L185P

  • Polymer: Latex
  • Thickness: 18 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Pinked
  • Grip: Honeycomb
  • Construction: Unsupported
  • Sizes: S - XL
  • Packed: 12 Dozen/Case

AKL

EN 374 Results: AKL
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

3

Performance Level: 3

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 110 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Heavy Duty Unsupported Latex, Unlined with Smooth Finish - 44 Mil

47-L442

  • Polymer: Latex
  • Thickness: 44 Mil
  • Lining: Unlined
  • Length: 17"
  • Cuff: Rolled
  • Grip: Smooth
  • Construction: Unsupported
  • Sizes: M - XL
  • Packed: 1 Dozen/Case

AKL

EN 374 Results: AKL
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

3

Performance Level: 3

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 74 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Nitrile, Unlined with Raised Diamond Grip - 15 Mil

50-N140B

  • Polymer: Nitrile
  • Thickness: 15 Mil
  • Lining: Unlined
  • Length: 13"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S - XXL
  • Packed: 12 Dozen/Case

AJK

EN 374 Results: AJK
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

3

Performance Level: 3

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 96 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Nitrile, Unlined with Raised Diamond Grip - 11 Mil

50-N110G

  • Polymer: Nitrile
  • Thickness: 11 Mil
  • Lining: Unlined
  • Length: 13"
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: S - XXL
  • Packed: 12 Dozen/Case

ABK

EN 374 Results: ABK
A: Methanol
B: Acetone
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

2

Performance Level: 2

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 35 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

QRP® Qualatherm®

Heat & Cold Resistant Glove with Silicone Rubber Outer Shell and Nylon Lining - 12"

70G

  • ISO Cleanroom: ISO 5 (Class 100)
  • Temperature Resistant: Extreme Cold
  • Liner Material: Nylon
  • Polymer: Silicone
  • Coating: Silicone
  • Coating Coverage: Full Hand
  • Grip: Smooth
  • Lining: Nylon
  • Cuff: Open
  • Length: 12"
  • Construction: Supported
  • Sizes: M-XL
  • Packed: 1 Pair/Case

JKL

EN 374 Results: JKL
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

2

Performance Level: 2

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: <30 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Latex, Flock Lined with Honeycomb Grip - 18 Mil

48-L187Y

  • Polymer: Latex
  • Thickness: 18 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Straight
  • Grip: Honeycomb
  • Construction: Unsupported
  • Sizes: S - XL
  • Packed: 12 Dozen/Case

KLMPST

EN 374 Results: KLMPST
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
P: Hydrogen Peroxide 30%
S: Hydrogen Fluoride 40%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

2

Performance Level: 2

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >30 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Chemguard+™

14" Long Heavyweight Neoprene with Interlock Lined and Crinkle Grip

1SN2537

  • Polymer: Neoprene
  • Lining: Interlock
  • Length: 14"
  • Cuff: Gauntlet
  • Grip: Crinkle
  • Coating Coverage: Full Hand
  • Construction: Supported
  • Sizes: L
  • Packed: 72 Pair/Case

AKLPT

EN 374 Results: AKLPT
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

2

Performance Level: 2

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 53 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Assurance®

Unsupported Latex, Flock Lined with Honeycomb Grip - 14 Mil

48-L140Y

  • Polymer: Latex
  • Thickness: 14 Mil
  • Lining: Flocked
  • Length: 12"
  • Cuff: Rolled
  • Grip: Honeycomb
  • Construction: Unsupported
  • Sizes: S-XL
  • Packed: 12 Dozen/Case

KLMPST

EN 374 Results: KLMPST
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
P: Hydrogen Peroxide 30%
S: Hydrogen Fluoride 40%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

2

Performance Level: 2

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >30 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

PIP®

Unsupported Latex, Unlined with Raised Diamond Grip - 14 Mil

3343

  • Polymer: Latex
  • Thickness: 14 Mil
  • Lining: Unlined
  • Length: 12"
  • Cuff: Pinked
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: 6-10
  • Packed: 12 Dozen/Case

KLMPST

EN 374 Results: KLMPST
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
P: Hydrogen Peroxide 30%
S: Hydrogen Fluoride 40%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

2

Performance Level: 2

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >30 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

ChemGrip™

Neoprene Coated Glove with Interlock Liner and Etched Rough Finish - 12"

57-8630R

  • Polymer: Neoprene
  • Lining: Interlock
  • Length: 12"
  • Cuff: Straight
  • Grip: Etched
  • Dip: Multi
  • Liner Material: Interlock
  • Construction: Supported
  • Sizes: L
  • Packed: 6 Dozen/Case

AKLPT

EN 374 Results: AKLPT
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

2

Performance Level: 2

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 53 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Chemguard+™

18" Long Heavyweight Neoprene with Flannel Lined and Crinkle Grip

1SN2539

  • Polymer: Neoprene
  • Lining: Cotton
  • Length: 18"
  • Cuff: Gauntlet
  • Grip: Crinkle
  • Construction: Supported
  • Sizes: L
  • Packed: 36 Pair/Case

ALKPT

EN 374 Results: ALKPT
A: Methanol
L: Sulfuric Acid 96%
K: Sodium Hydroxide 40%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

2

Performance Level: 2

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 53 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

PIP®

Unsupported Latex, Flock Lined with Raised Diamond Grip - 18 Mil

2312

  • Polymer: Latex
  • Thickness: 18 Mil
  • Lining: Flocked
  • Cuff: Pinked
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: 7-10
  • Packed: 12 Dozen/Case

KLMPST

EN 374 Results: KLMPST
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
P: Hydrogen Peroxide 30%
S: Hydrogen Fluoride 40%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

2

Performance Level: 2

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: >30 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

QRP® Qualatherm®

Heat & Cold Resistant Glove with Silicone Rubber Outer Shell and Nylon Lining - 23"

75G

  • ISO Cleanroom: ISO 5 (Class 100)
  • Temperature Resistant: Extreme Cold
  • Liner Material: Nylon
  • Polymer: Silicone
  • Coating: Silicone
  • Coating Coverage: Full Hand
  • Grip: Smooth
  • Lining: Nylon
  • Cuff: Open
  • Length: 23"
  • Construction: Supported
  • Sizes: L
  • Packed: 15 Pair/Case

JKL

EN 374 Results: JKL
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

2

Performance Level: 2

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: <30 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

QRP® Qualatherm®

Heat & Cold Resistant Glove with Silicon Rubber Outer Shell and Nylon Lining - 15"

74G

  • ISO Cleanroom: ISO 5 (Class 100)
  • Temperature Resistant: Extreme Cold
  • Liner Material: Nylon
  • Polymer: Silicone
  • Coating: Silicone
  • Coating Coverage: Full Hand
  • Grip: Smooth
  • Lining: Nylon
  • Cuff: Open
  • Length: 15"
  • Construction: Supported
  • Sizes: L-XL
  • Packed: 15 Pair/Case

JKL

EN 374 Results: JKL
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

2

Performance Level: 2

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: <30 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

ChemGrip™

Neoprene Coated Glove with Foam Insulated Liner and Etched Rough Finish - 18"

57-8653R

  • Polymer: Neoprene
  • Lining: Foam
  • Length: 18"
  • Cuff: Straight
  • Grip: Etched
  • Dip: Multi
  • Construction: Supported
  • Sizes: L
  • Packed: 36 Pair/Case

KLPT

EN 374 Results: KLPT
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

2

Performance Level: 2

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 48 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Chemguard+™

Lightweight Neoprene Coating with Cotton Knit Lining and 11" Long Pinked Cuff

1CN0034

  • Polymer: Neoprene
  • Thickness: 53 Mil
  • Lining: Cotton
  • Length: 11"
  • Cuff: Straight
  • Grip: Smooth
  • Dip: Single
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: M-XL
  • Packed: 72 Pair/Case

AKLOPT

EN 374 Results: AKLOPT
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
O: Ammonium Hydroxide 25%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

2

Performance Level: 2

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: 48 MIN

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

XtraTuff™

Oil Resistant PVC Glove with DuPont™ Kevlar® Liner and Rough Grip

58-8658K

  • Polymer: PVC
  • Length: 12"
  • Cuff: Open
  • Grip: Rough
  • Coating Coverage: Full Hand
  • Liner Material: Kevlar
  • Construction: Seamless Knit
  • Sizes: M-XL
  • Packed: 6 Dozen/Case

AJK

EN 374 Results: AJK
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

1

Performance Level: 1

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: --

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

Ambi-dex® Overdrive

Disposable Nitrile Glove, Powder Free with Textured Grip - 6 mil

63-336PF

  • Grade: Premium Industrial
  • Polymer: Nitrile
  • Thickness: 6 Mil
  • Grip: Textured
  • Powder: Powder Free
  • Box Count: 100
  • Sizes: S - XL
  • Packed: 10 Boxes/Case

XtraTuff™

Cold Resistant PVC Glove with Detachable Acrylic Liner and Sandy Coating - Insulated & Waterproof

58-8658DL

  • Polymer: PVC
  • Lining: Acrylic
  • Length: 12"
  • Cuff: Straight
  • Grip: Rough
  • Coating Coverage: Full Hand
  • Liner Material: Interlock/ Terry Cloth
  • Construction: Seamless Knit, Supported
  • Sizes: L - XXL
  • Packed: 6 Dozen/Case

AJK

EN 374 Results: AJK
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

1

Performance Level: 1

Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.


BTT: --

BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.

BEST SELLER

Ambi-dex®

Disposable Nitrile Glove, Powder Free with Textured Grip - 7 mil

2940/XL2XL

  • Grade: Industrial
  • Polymer: Nitrile
  • Thickness: 7 Mil
  • Grip: Textured
  • Powder: Powder Free
  • Box Count: 90
  • Sizes: XL-2XL
  • Packed: 10 Boxes/Case
BEST SELLER

Ambi-dex®

Disposable Nitrile Glove, Powder Free with Textured Grip - 7 mil

2940

  • Grade: Industrial
  • Polymer: Nitrile
  • Thickness: 7 Mil
  • Grip: Textured
  • Powder: Powder Free
  • Box Count: 100
  • Sizes: S-L
  • Packed: 10 Boxes/Case
CAUTION: This guide is provided as an aid in determining the general suitability of various products for use with specific chemicals. These recommendations are advisory only and the SUITABILITY OF THE PRODUCT FOR A SPECIFIC APPLICATION OR ENVIRONMENT MUST BE DETERMINED BY THE PURCHASER OR USER OF THE PRODUCT. This webpage should be used as a guide only.
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.