Impact & Anti-Vibration
Using only the best in synthetics and leather materials, we produce multiple high performance gloves for specific applications. As leaders in hand protection, we offer innovative products that are suited for you.
LEARN MORE ABOUT HAND PROTECTION
SIZE: 3XL
Maximum Safety®
AR/FR Top Grain Goatskin Leather Glove with Kevlar® Liner - Straight Thumb09-K3750
- Goatskin Leather Drivers
- 13 Gauge Kevlar Cut Lining
- Straight Thumb
- Slip-On Cuff
- Chromium VI Free
- Flame Retardant
- ATPV 28.5 cal/sm2
- SIZES: S-3XL
- PACKED: 6 Dozen/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 3
Cut (Coupe Test): 3
Tear: 2
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.
Maximum Safety®
Reinforced Goatskin Leather Palm Glove with Leather Back, Kevlar® Lining and TPR Molded Knuckle and Dorsal Guards120-4150
- Goatskin Leather Palm & Back
- Reinforced Brown Leather Padded Palm
- Kevlar Lining
- Full TPR Impact Protection
- Hook & Loop Closure
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 2
Cut (Coupe Test): 3
Tear: 3
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
Maximum Safety®
MOG™120-5900
- Maximum Safety MOG
- Syntetic Reinforced Leather Palm with TPR Protection on the Fingers and Back of the Hand
- SIZES: M-3XL
- PACKED: 72 Pair/Case
Abrasion: 3
Cut (Coupe Test): 1
Tear: 1
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.
PosiGrip®
Seamless Knit Aramid Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers713KSSN
- Seamless Knit Aramid/Steel Blended Shell
- 13 Gauge
- Black Nitrile Foam Coated Grip
- Palm & Fingertips
- Knit Wrist
- ATPV 4.4 cal/cm2
- SIZES: XS-3XL
- PACKED: 12 Dozen/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.
The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.
Maximum Safety®
FR Treated Synthetic Leather Utility Glove73-1703
- FR Treated Synthetic Leather Utility Glove
- Reinforced Palm
- Wing Thumb
- Kevlar Lined
- SIZES: S-3XL
- PACKED: 6 Dozen/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 3
Cut (Coupe Test): 3
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.
Self Extinguishing garments are made from material that is not inherently flame retardant, but are chemically treated to become flame resistant. They are NOT designed for use in ARC flash or flash fire applications. When a flame source is removed from the treated material, the material will self-extinguish within a given time frame. The treated material can melt and drip and has a limited life span dependent on washings and what the garment is exposed to. Performance is established using the ASTM D6413 test method.
R2 RigRunner™
R2 Rig Runner87000
- Snythetic Leather Double Palm
- Red PVC Dots on Palm and Fingers
- Impact Protection
- TPR on Back of Hand
- Long Neoprene Cuff
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Abrasion: 3
Cut (Coupe Test): 3
Tear: 4
Puncture: 2
Cut (TDM-100 Test): X
Impact Protection:
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
R2 RigAce™
R2 Rig Ace87010
- Synthetic Leather Double Palm
- Red Silicone Palm
- TPR on Back of Hand
- Long Neoprene Cuff
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Abrasion: 3
Cut (Coupe Test): 2
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
R15™
R15 Rigger Glove with Cut Resistant PVC Palm87015
- Synthetic Leather Double Palm
- PVC Palm
- TPR on Back of Hand
- Pull-On
- SIZES: S-3XL
- PACKED: 72 Pair/Case
R2 RigCat™
R2 Rig Cat 287020
- Synthetic Leather Palm
- Cut Protection
- Impact Protection
- TPR on Back of Hand
- Long Neoprene Cuff
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Abrasion: 3
Cut (Coupe Test): 2
Tear: 4
Puncture: 3
Cut (TDM-100 Test): X
Impact Protection:
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
R2 RigCat™
R2 Rig Cat 587030
- Silicone Palm
- Cut Protection
- Kevlar Thumb Reinforcement
- TPR on Back of Hand
- Long Neoprene Cuff
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Abrasion: 3
Cut (Coupe Test): 5
Tear: 4
Puncture: 3
Cut (TDM-100 Test): X
Impact Protection:
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.
R2™
R2 Safety Rigger Green Corded Palm87800
- Green Cotton Corded Palm
- TPR on Back of Hand
- Hook and Loop Cuff
- Cut Protection
- SIZES: S-3XL
- PACKED: 72 Pair/Case
R2™
R2 Safety Rigger Reinforced Comfort87810
- Synthetic Leather Double Palm
- Red Silicone Palm and Fingers
- TRP on Back of Hand
- Index Finger Touchscreen
- Hook and Loop Closure
- SIZES: S-3XL
- PACKED: 72 Pair/Case
ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.
R2™
R2 Safety Rigger Insulated87811
- Synthetic Leather Double Palm
- Red Silicone Palm and Fingers
- Fleece Lining and Waterproof Insert
- TPR on Back of Hand
- SIZES: S-3XL
- PACKED: 72 Pair/Case
R2™
R2 Winter Green Corded Palm Rigger Glove with Hook and Loop Wrist87812
- Green Cotton Corded Palm
- TPR on Back of Hand
- Hook and Loop Closure
- Waterproof Lining
- 150 Gram Positherm
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Abrasion: 1
Cut (Coupe Test): 3
Tear: 3
Puncture: 3
Cut (TDM-100 Test): X
Impact Protection:
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
R2™
R2 Safety Rigger Utility Glove87820
- Silicone Grip on Palm and Fingers
- TPR on Back of Hand
- Hook and Loop Closure
- SIZES: S-3XL
- PACKED: 72 Pair/Case
R2™
R2 Safety Rigger87830
- Padded Palm
- TPR on Back of Hand
- Touchscreen Index Finger
- Pull-On Cuff
- SIZES: S-3XL
- PACKED: 72 Pair/Case
R2™
R2 Safety Rigger87840
- Rigger Glove
- TPR on Back of Hand
- Touchscreen Index Finger
- Hook and Loop Closure
- SIZES: S-3XL
- PACKED: 72 Pair/Case
R2™
Reinforced Synthetic Leather Palm Glove with Spandex Back and TPR Molded Knuckle and Dorsal Guards - Touchscreen Compatible87850
- Hi-Vis TPR on Back of Hand and Fingers
- Touchscreen Index Finger
- Hook and Loop Closure
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Abrasion: 4
Cut (Coupe Test): 3
Tear: 4
Puncture: 4
Cut (TDM-100 Test): X
Impact Protection:
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.
West Chester®
Oil Armor™ Finish Top Grain Goatskin Leather Glove with Para-Aramid and Fleece Lining - Keystone ThumbKS9911KP
- Goatskin Leather Drivers
- Premium Grade
- Keystone Thumb
- Fleece Lined
- Oil Armor Technology
- Para-Aramid Cut Lining
- ATPV 43 cal/cm2
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 2
Cut (Coupe Test): 5
Tear: 2
Puncture: 4
Cut (TDM-100 Test): D
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.
West Chester®
AR Top Grain Cowhide Leather Glove with Kevlar® Liner - Keystone ThumbKS992K
- Cowhide Leather Drivers
- Premium Grade
- Keystone Thumb
- Kevlar Cut Lining
- Slip-On Cuff
- ATPV 43 cal/cm2
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 2
Cut (Coupe Test): 4
Tear: 3
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.
West Chester®
Oil Armor™ Finish Top Grain Goatskin Leather Glove with Para-Aramid Liner - Keystone ThumbKS993KOA
- Goatskin Leather Drivers
- Premium Grade
- Keystone Thumb
- Oil Armor Technology
- Para-Aramid Cut Lining
- Slip-On Cuff
- ATPV 43 cal/cm2
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 2
Cut (Coupe Test): 5
Tear: 2
Puncture: 4
Cut (TDM-100 Test): D
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.
West Chester®
Oil Armor™ Finish Top Grain Goatskin Leather Glove with Para-Aramid Liner and Molded Knuckle and Dorsal Guards - Keystone ThumbKS993KOAB
- Goatskin Leather Drivers
- Premium Grade
- Keystone Thumb
- Oil Armor Tech
- Para-Aramid Cut Lining
- TPR Impact Protection
- ATPV 43 cal/cm2
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 2
Cut (Coupe Test): 5
Tear: 2
Puncture: 4
Cut (TDM-100 Test): D
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.