ChemGrip™

Neoprene Coated Glove with Interlock Liner and Etched Rough Finish - 12"

57-8630R

AKLPT

EN 374 Results: AKLPT
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

3121

EN 388 2016 Results: 3121X
Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Available Colors:

Black
  • SIZES: L
  • Packed: 6 Dozen/Case
  • Country of Origin: Sri Lanka
Product Attributes

Polymer: Neoprene

Neoprene: Neoprene provides a broad range of resistance to acids, alcohols, fats, caustics, refrigerant, ketones and detergents. It is tough and resistant to abrasion, snags and perforation. However, it degrades with some common chemicals, such as bleach.

View All Neoprene

Grip: Etched

Etched: Etched finishes provide an economical choice of enhancing abrasion and cut protection while providing good protection in wet and dry applications.

View All Etched

Lining: Interlock

Interlock: Interlock lining dries quickly, sheds little lint and offers great dexterity.

View All Interlock
Product Description

Product Description

Ideal for refining, galvanizing, degreasing, plating, petrochemical industries and kitchen cleaning and maintenance.

Features

  • Neoprene gloves provide superior protection from a wide range of chemicals such as acids, caustics, solvents and oils
  • Multi-dip process provides fully liquid-proof protection
  • Etched rough finish has excellent non-slip grip and cut resistance
  • Gauntlet cuff for added forearm protection
  • Black color hides dirt
  • Supported Neoprene Glove
  • 12 Inch Length
  • Interlock Lined
  • Black
  • Etched Rough Finish
  • Gauntlet Cuff
Standards Met

EN 374 Results: AKLPT

A: MethanolK: Sodium Hydroxide 40%L: Sulfuric Acid 96%P: Hydrogen Peroxide 30%T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

EN 388 2016 Results: 3121X

Abrasion: 3 Cut (Coupe Test): 1 Tear: 2 Puncture: 1 Cut (TDM-100 Test): Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Chemical Permeation

Chemical Permeation

The chemical permeation of our product is measured in accordance to European Standard EN 374-3. This measures the resistance of protective gloves against chemicals and microorganisms. Part 3 of the standard determines the level of resistance to permeation by chemicals.

Breakthrough Time (BTT)

The number of minutes from initial contact with a test chemical until it is first detected on the inside of the glove.

Breakthrough Time - Protection Index

Each chemical tested is classified in terms of breakthrough time (performance level 0 to 6).

CAUTION: This information is provided as an aid in determining the general suitability of various products for use with specific chemicals. These recommendations are advisory only and the SUITABILITY OF THE PRODUCT FOR A SPECIFIC APPLICATION OR ENVIRONMENT MUST BE DETERMINED BY THE PURCHASER OR USER OF THE PRODUCT. This information should be used as a guide only.

Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL