AKL

EN 374 Results: AKL

A: MethanolK: Sodium Hydroxide 40%L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed are the chemicals that passed for this glove. Learn more about chemical permeation below.

4X11

EN388 Results: 4X11X

EN 388 2016 Results:Abrasion: 4Cut (Coupe Test): XTear: 1Puncture: 1Cut (TDM-100 Test): Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Assurance®

Heavy Duty Unsupported Latex, Unlined with Smooth Finish - 44 Mil

47-L442

Available Colors:

Black
  • SIZES: M-XL
  • Packed: 1 Dozen/Case
  • Country of Origin: Sri Lanka
VIEW SPEC SHEET REQUEST A SAMPLE
Product Attributes

Polymer: Latex

Latex : Latex provides good resistance to numerous acids and ketones, is flexible and is tear and snag resistant. However, latex should not be used for contact with hydrocarbon basedoils or solvents, and it is possible for some users to have intolerance to the material.

View All Latex

Grip: Smooth

Smooth: Available in Nitrile and PVC coatings provide the wearer with a secure dry grip. Liquids will not absorb into the coating, keeping hands dry and clean. Recommended for dirty, tough jobs requiring tacky grip on dry surfaces.

View All Smooth

Lining: Unlined

Unlined: Unlined to reduce potential of product contamination.

View All Unlined
Product Description

Product Description

Used for chemical applications, fishing, agriculture, mining, sandblasting/pellet blasting, sanitation, pot sink applications.

Features

  • Unlined to reduce potential of product contamination
  • Extra thick for added protection and abrasion resistance
  • Anatomically shaped to provide good fit
  • Long cuff to protect forearm
  • Rolled cuff adds additional strength to cuff edge for longer glove life and prevents liquid run-off
  • Chlorinated to harden and cleanse the surface of the glove
  • Silicone Free

Related Product Downloads

  • Assurance Unsupported Latex
  • 44 Mil
  • Overall Length 17 Inches
  • Black
  • Unlined
  • Smooth Finish
  • Rolled Cuff
Standards Met

EN 374 Results: AKL

A: MethanolK: Sodium Hydroxide 40%L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed are the chemicals that passed for this glove. Learn more about chemical permeation below.

EN388 Results: 4X11X

EN 388 2016 Results:Abrasion: 4Cut (Coupe Test): XTear: 1Puncture: 1Cut (TDM-100 Test): Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Chemical Permeation

Chemical Permeation

The chemical permeation of our product is measured in accordance to European Standard EN 374-3. This measures the resistance of protective gloves against chemicals and microorganisms. Part 3 of the standard determines the level of resistance to permeation by chemicals.

Breakthrough Time (BTT)

The number of minutes from initial contact with a test chemical until it is first detected on the inside of the glove.

Breakthrough Time - Protection Index

Each chemical tested is classified in terms of breakthrough time (performance level 0 to 6).

CAUTION: This information is provided as an aid in determining the general suitability of various products for use with specific chemicals. These recommendations are advisory only and the SUITABILITY OF THE PRODUCT FOR A SPECIFIC APPLICATION OR ENVIRONMENT MUST BE DETERMINED BY THE PURCHASER OR USER OF THE PRODUCT. This information should be used as a guide only.

The Assurance brand of products has been developed for chemical resistant applications found in all types of industrial settings and designed with the utmost safety in mind. Chemical resistance test results are available on a wide variety of chemical families found commonly in the workplace. All of these gloves have been tested for durability as well. Assurance hand protection will satisfy your needs or we'll take the product back.

View Products
pin Rep Finder